Search results for query: *

I am in need of a pair of seat foam kits for 68 Barracuda bucket seat foam replacments. Anyone have a reliable source that would have them in stock? Legendary is quoting 8/23 shipping

Edelbrock Performer intake manifold recently blasted and cleaned up. This is a great street manifold for under hood clearance applications. Manifold has been ported to match up to FelPro 1213S-3 large port gasket. On my 340 the manifold supported 400 plus dyno horsepower. I will throw in a new...

Looking for a 54 inch cab visor for our 1948 Chevy truck and a rear bumper. Anyone have a lead on where we my find one. Thanks in advance

I thought I had these sold on a different site but the sale fell through. One set of new in unopened box 828-16 Roller lifters, please reference the link below for technical info. Solid lifter with .800 wheel Sale price - $450 plus freight Endure-X Solid Roller Lifters for Chrysler V8 273-360...

For sale one complete set (16) Comp Cams pushrods P/N 7936 7.100 length .080 wall thickness 5/16 diameter Double ball end With oil thru hole $50 plus the ride PayPal or USPS money order

My wife Mary's new old truck 1948 Chevy ThriftMaster 5 window Long term S10 chassis conversion coming She wants to leave the patina

After a couple of years of delays I finally converted from bench to bucket seats in my 67 Barracuda. It all started when I purchased a pair of 1968 black buckets seat from my favorite parts Guy@RAT ROD AL . My car is not original so I chose to install the taller back 68 seats rather than the...

This is a factory rubber mounted tail housing weight that Chrysler engineered to dampen drive train vibrations. They do work well. This weight mounts in the factory location via a 2 inch bolt pattern. Freshly rust treated and epoxy painted, ready to mount. Includes bolt plate. $32 plus the...

Looking for a factory 727 tail shaft counter weight to apply to the trans in my 67 Barracuda. Thanks in advance

New in unopened box one set of Comp Cams Endure-X mechanical roller lifters. These are retrofit rollers for a LA SBM. $575 plus shipping from 65052 NEW LOWER $ PRICE $ 525 PLUS SHIPPING Payment via PayPal + 3% or USPS money order Will ship insured promptly via UPS or USPS, your choice.

For sale one pair of black used 1968 Barracuda bucket seat backs. Backs are not perfect but are in good driver quality condition. $100 for the pair shipped to the lower 48 states. Add 5% for PayPal LOWER PRICE - $85 shipped to the lower 48 states Not including shipping that is less than 1/2 $...

Adding an AirGap manifold has beaten me in the *** for hood clearence and I find myself in need of a drop base that will fit a Edelbrock carb with electric choke. The drop needs to be close to 1 3/4 deep to make this work. The Edelbrock drop base is only 1 1/8 deep which is not enough. Anyone...

It was a long winter but I finally got the engine installed and running in my Barracuda. I decided on a new look for my old valve covers. What do you Guy's think? Pass or fail?

I am in bad need of the above fuel pump. If you have one that you can part with please respond. Thanks in advance

I currently have the engine out of my 67 Barracuda is it possible to remove the power steering box to remove the column coupler? I do have the car on a 4 post lift so getting under it is not an issue. My old beat up neck will not let me work under the dash to remove the steering column. Canit...

I have been thinking about using Shark hide on my polished cast aluminum SBM valve covers. Does anyone have any experience using this product? How well will it hold up to the heat? Thanks in advance

Had the local powder coater shop clear coat my new AirGap. Thought I would post a couple of pic's of it in case any members were thinking about doing a clear coat application on their intake.

With no luck, I have been trying to find A/C compressor brackets that will apply a Sanden compressor to my pre 1970 SBM. I wish to retain the factory pulley arrangement. Has anyone done this? Thanks in advance for any info Jim K

Just got my old LA 340 X heads back from a local retired engine builder. I left the heads with him for some economy street performance porting as this is not a track engine. I had to remove the heads to swap out some bogus hyd roller lifters so I thought what the hell I'll have them cleaned up...

I need 3-4 feet of MSD 8.5mm bulk spark plug wire, red or black color. Thanks in advance

I have noticed in xtreme heat that the oil pressure on my LA 340 drops to 15-18 psi at idle while in gear. 10W-40 Dino oil, Wix filter I am wanting to up the idle oil pressure via a high volume Melling oil pump M-72-HV. Has anyone run a HV Melling pump with the stock 5 quart oil pan? Ya hear the...

MRE W Series A Engine Cylinder Head

Need to replace the rear main oil seal in my 1969 LA 340 that is leaking. Which is the best seal to use that hopefully will not leak. Installation tricks? Thanks Jim K

Does anyone make a one piece oil pan gasket for an LA 340?

I will be doing some engine upgrades this winter one of which is an Edelbrock AirGap intake. 67 Barracuda, LA 340, Edelbrock 800 cfm carb, Edelbrock drop base 14 inch air cleaner. Will it all fit under the factory hood without any modifications? Thanks in advance Jim K

Does anyone know of a source for a water pump rebuild kit for my 1967 LA A/C water pump? Or perhaps a shop that will rebuild the pump. I dont wont a dime store rebuilt pump from the auto parts convenience store. Thanks in advance Jim K

This is a virgin Mopar M1 intake manifold P4532851 it has never been mounted or modified. It does have a some minor handling blemishes but nothing that will affect performance. Will trade for unmolested LA Edelbrock AirGap or LD340. PM me if interested, Thanks.

I was inspired by a thread here on FABO. I could not resist.

HOT ROD Drag Week 2021 Day 1 Route and Live Stream

The local Ford and Chevy dealerships decided to have a car show today that they labeled "The Battle of the Brands" About 200 cars showed up. I'll give you one guess who won 1st in Class and Best in Show.