Search results for query: *

My plan is to swap a 6.1 hemi as minimalistly as possible then when money is available do a front and rear end conversion with the RMS stuff, what all would I need to go from my 340/A833 to a 6.1/A833 and be running and driving. I was looking at some of the Mancini swap mounts have many of you...

Hi looking to upgrade from my carter 1406 600cfm carburetor, looking to gain as much power as I can for the 340, was told different things by different mechanics so wanted to get more opinions, one recomended going straight to the 750 for a noticeable difference not sure if he meant a double...

I’ve got a 68 340 barracuda with a 4 speed and 3.55 rear gear it’s got a cam just a touch above stock and x heads, also got an LD340 intake with carter 1406 afb carb basically a stock rig but also have the hi-po exhaust manifolds, I want to get this car into the 10’s and still be streetable, how...

Want to start gathering cash for parts for a future build. Currently have a 68 fastback barracuda with a 340, 340 has a very mild cam just a touch above stock, LD340 intake and a afb 1406 carb, exhaust manifolds are TA hi-po manifolds. Question is for what I want to achieve whats the best route...

Looking to buy a 1968 barracuda fastback console car, mainly looking for a driver or nice car between 12 and 20k I’m located in California near LA looking for cars in this area or surrounding states. No rust please. Looking for a 318, 340, 360 or even 383 car no 440’s or slants. If you can help...

Lookin for a 1968 fastback barracuda, only looking for a console car or a manual also looking for either 340 360 or 383 may consider 318’s. Budget is 20k and under mainly around 15k May take small projects but must be a 1968 fastback thankyou in advance

Hi FABO I’m looking to buy a 67-69 cuda fastback for around 16,000 give or take a couple thousand. I’m 18 fresh out of highschool looking to take out a loan to get a nice classic to drive and possibly make a daily driver while building my credit. Car should be turn key ready to go or be very...

Going to swap a small block into my daily driver dart but don’t know if I should do a 318 or a 360. I can get both engines for about the same price and they both put out between 400-450 hp the 318 has been fully gone thru on the top and bottom end with new everything and the 360 has all new...

Selling my dart, but also open to trades Dart Link to my add, let me know guys thx

Hey FABO im looking to trade my recently restored 1970 dart for a 1968 or 1969 barracuda in like condition, basically a solid car thats turnkey, not show car but a solid car nonetheless. Let me know whacha got thanks. Car has the slant six with super six setup Recently repainted New cragars and...

Anyone know of any extremely solid mopar mechanics in socal around orange county? I need a mechanic to do a swap for me in a timely mannar jus need someone professional and honest who does great work. Thanks

Hey guys im going to look at a 360 and 727 today and would like to know some tips an tricks to inspect it an make sure its all good. Im not a mechanic so i want to know what to look for to be sure the seller isnt just blowing smoke up my ***, the engine looks great and for the price even better...

ENGINE magnum 5.9 HEADS -magnum engine quest heads best flow -tight quench .30 bowls opened up -weisco dished pistons INTAKES -MAGNUM HEADS DRILLED FOR LA INTAKES -mopar m1 performance dual plane intake OR 2176 edelbrock dual plane intake CAMSHAFT -Roller cam Compcams #20-000-9 506 lift 216...

Just wondering do magnum 360's generally get better mileage than the la 360's? Are magnums more efficient head to head?

Hey guys need some help assembling ideas and a plan for doing a newer hemi swap into my 1970 dart I want to get this done as cost-effectively as possible but I also want everything done right that will last, it will be my daily driver if this could be a going list of people adding suggestions...

Hey guys just curious are there any overdrive transmissions that will bolt to a hemi and fit into a 1970 dart without any major fabrication?

Basically lookin for any ideas for a moderately easy swap with a budget of 8k-10k that would yield modern mpgs and decent 1/4 times

Hey Fabo thinkin of buying a 318 that has had these things done to it what do you guys thinn i could get mileage wise with it hooked up to a nv4500

what would it take to put my 70 dart in the mid 12 range with mileage above 15 per gallon

Hey guys jus need some opinions on what i should do with my car. I want a build that will have decent mileage and lots of power i will be street racing this car at stoplights and also doing canyon cruises. But i also want gobs of power on tap. Any suggestions? Mileage above 15?

Im buying an 8-3/4 a body rear end of craigs and wanted some opinions. Im not sure what these cost but im able to get one for a $100 is this a good deal for the condition of the rear end

Hey FABO ive got a 70 dart swinger with the /6 and and want to be able to do mid 12's or better in the quarter and get 20+ mpg without nos. Is this achievable or am I in dreamland?

Hey FABO ive got a 70 dart swinger with the /6 and and want to be able to do mid 12's or better in the quarter and get 20+ mpg without nos. Is this achievable or am I in dreamland? This will be a daily driver. Other option: 12 second 360 or better with decent mileage. Any help?

Lookin for a car build to mirror or add onto that would help me achieve my goals. Ive got a 1970 dart and i want to do a v8 swap. I want to get 12's or better in the quarter and also get 14-15 mpg or better. Also i want to be able to do this on pump gas and without nos. If it can be done without...

Lookin for a car build to mirror or add onto that would help me achieve my goals. Ive got a 1970 dart and i want to do a v8 swap. I want to get 12's or better in the quarter and also get 14-15 mpg or better. Also i want to be able to do this on pump gas and without nos. If it can be done without...

Hey guys im lookin at buying this engine off craigs to swap into my 1970 dart am i wanted to get some opinions on it first off, for what it is is this a good deal given the mods done to it also what kind of mileage could i expect with it and any other things you could add in that would help me...

Hey guys curious if any of you know of any combos I could use for my 1970 dart. Stuff like engine setups, tranny, gears, tires, exhaust, turbo or not. Goals are around 12 seconds or better in the quarter and get 14 mpg or better. Thanks

Jus curious are there any diesel powered a body mopars out there

Hey guys im playing around with the idea of putting a newer hemi into my 70 dart swinger with a 225 /6. I want to get a feel for what it would take to do this and would need some more info on it such as what the total cost would be (ballpark), what i need such as tranny, k member, suspension etc...

Hey FABO members i have 1970 dodge dart with the slant six 225 and im looking towards an engine swap or even just upgrading my slant six. The goal is to have good hp and torque while having pretty decent mileage, i also want to be able to go down to the track here and there and do 12-13's or better