Search results for query: *

I’m looking for a passenger side shock plate (or pair) for an 8 3/4” rear (69 Barracuda), with good threads on the shock mount. zip is 55304 Thanks!

I’m doing an intake swap. The valley pan from my RV 440 had some minor oil pooling. There was no sealant on any intake bolts.. so I’m assuming that’s where much of the oil came from. I have some stainless intake bolts that I’d like to use. Permatex Aluminum Anti-seize is recommended for these...

Looking for a passenger side mirror to match mine, and that has the same, approximate appearance. Minor pitting is okay! Preferably with hardware.

I was told this came out of a ‘70 Challenger when I purchased it. $30 + shipping Waiting on the sale of the ball until I get a decent value. I’m at postal code 55304.

I’m looking for three headliner bows. anyone?

Greetings all- Just thought I'd pass this along, since I couldn't find something similar on fabo (it probably exists, but...). Regarding the bulkhead diagrams available for my Barracuda, I found that the manual, as well as my 11X17 laminated, colored diagram aren't exactly laid out in a manner...

(69 Barracuda) Anybody know where I can buy these little guys? Classic Ind has a B body version, but they don’t match.

I’m finding lots of info on bezel restoration, but very little on oe-style gauge replacement purchase options. 1969 Barracuda project car Speedo My gauge “ticks” (like a signal) and bounces like crazy. I replaced my Speedo cable with a new unit (also lubed the cable), thinking the square gauge...

$25 +shipping (and PayPal fee). New, never used. ~4” length. I’m also selling locally via FB Marketplace. I’m at 55304.

I think all of my studs are intact, but were they ever threaded? I have no clips on any of the studs, so wondering what was originally holding the grilles on, or what might now work considering the condition of the studs? These are barely hanging together right now.

A Racing Documentary. This is no modern documentary with the subject of vintage cali racing. This is the real thing, filmed, shot and produced in 1965. It’s mainly about Rick “Iceman” Stewart... and Wow, what a character he is. Showing now on Amazon (Prime). Racing Documentary: The Seven...

Greetings- I’m putting some final touches on my project and am wondering about aftermarket air cleaners, breathers and PCV. My motor is a 1977 MH stock (for now) 440. It did not come with an air cleaner assmbly. I have a working PCV valve in the drivers side cover, which attaches via hose to...

My 1969 Barr project car was originally a manual 318 with AC. The original wiring harness is 100% intact, but a previous owner sprayed the compartment and all wiring with grey. I’ve got almost everything ID’d, connected, and tested... except the two wires shown in the pic. Both wires, I’m...

Greetings all. My project (69 Barr, originally 318) has a 1977 440 with a thermoquad and 4 speed. Can anybody point me to the linkage I’m missing to hold the throttle cable, and anything else I’m missing to Correctly operate the carb?

-1969 Barracuda -318 originally -Factory 4 speed (looks like no clutch safety post on starter relay) -Recently put power to the system for the first time. Power going correctly through the bulkhead “J” connection... And back out through yellow wire to relay. -I’ve scoured the entire starter...

$900 Brand new TTi Big Block headers (383 or 440 B/RB), never fired, and have only been used to fit and cut plug wires. Absolutely gorgeous. Polished Ceramic Thermal barrier coated. Model: TTi 383440-134C5 1 3/4” primary tubes and 3” collectors. Perfect for an A Body Mopar, or B body, E body...

Anybody know if these bells will bolt up to the 1970s 440s?

Long post… and my first engine build (aside from a motorcycle engine), startup, and dyno. After getting it hooked up to the dyno, the motor started right up after one second and it sounded amazing... that was a relief and a great feeling. After about 4 seconds, we saw that my 750 DP HO carb was...

Had to pop my thermostat out (fresh rebuild) in prep for an upcoming dyno session and encountered a mess of gasket and rtv sealer on the thermostat housing. Went out and bought the amazing Lisle Razor Blade Scraper at my local Oreily’s. I paid $12, but Amazon has it for like $7. This tool is...

Looking for a valve cover breather cap for my 1969 (stamped 1968) 383. Zip code: 55304 (Mn)

Hey guys- I’ve finally been able install my rebuilt 383 and A833 into my 318 engine K member bay. Before plowing forward, I’m just looking for some feedback on how things look as far as engine stance/offset in the mounts, Z-bar (from TTI), ball studs, TTI measurements, oil pump housing, etc...

So, week ago I took the Angel’s Share tour at the Jack Daniel’s Distillery in Lynchburg, TN. What an amazing piece of Americana! I highly recommend a visit to the beautiful, historic grounds where JD was first boiled out of the still. The historian in me was perhaps most satisfyied by the...

Let me know. Send pics and I’ll PayPal you quick if the price is right. I’m in Mn, 55304. I have these on the back, so would be looking for something similar for front, but I’m not too picky... Jason

(Project car) I just installed my transmission Into the bellhousing. It went remarkably well. I used my old motorcycle jack and an old watercraft life jacket to stabilize the trans on the Jack. I used threaded mounting posts at the top and light taps with a rubber mallet. Slipped right in, 1 mm...

okay... in Minnesota right now.. pretty chilly, but garage is moderately heated. Break-in Oil is most likely pretty stiff. My engine is in a “built” state, but waiting to be mated with tranny and installed in car. I hadn’t primed the oil pump since last Fall (everything went well in the Fall...

Greetings! Regarding leveling the engine during installation, I’m just wondering what the general thinking is about having your ride stance set before installing a new engine. The car (69 Barr) currently has an old set of roller wheels (original 14”) and Tires (26” tall all the way around)...

Greetings! My 69 Barracuda project (factory 318 4 spd) came with a 4 speed transmission (date stamped late 1970) in the trunk. My crossmember is there, and I have a couple of mounting bolts and metal ‘brackets’ on the bottom of my freshly rebuilt trans. The problem is, I can’t tell from the...

Car looks pretty solid from afar... 67 Plymouth Barracuda notchback

Sold without motor, trans, wheels, tires... Plymouth Valiant, Mopar Not mine, just passing on what I saw...

Greetings Looking for a used dust cover for a 10.5” big block Bellhousing (cast# 2468372, or the like)... and the bolts if you have them. My zip code: 55304 (Andover, Mn)