Search results for query: *

History: Bought 67 barracuda, had motor rebuilt...very mild (almost factroy regarding HP) Purchased new Cold Case radiator (H x W : 16" X 22), 1 3/4" hoses, new thermostat 160*, 6 blade 18 1/2" fan. Water pump pulley is 7" Crank pulley is 7 1/2" No shroud Overheats on hot days when I am in...

I am having a fair amount of oil leaking from my drivers side breather. I have a breather on each of my Mopar Performance valve covers on my 383 with a Holley sniper system. The engine has just been through its first summer and while it ran well, I have had a fair amount of oil leaking issues...

Looking for exhaust tips for my Barracuda. Ideally stainless, 2.5" but let ,me know what you got.

Clutch does not have enough throw to fully depress my clutch. (Not an original 4 spd car.) I have pulled my z bar and am planning on drilling a hole 1" down where the pedal attaches to increase the throw. Any warning or advice before I do? An on using a hardened bolt with nylon washers.

Wondering if these linkage tabs look as like they're in the right places. Two larger and one thinner one. Should the two larger be on the top (1-2, 3-4)? And the thinner on The reverse?

I have a 67 barracuda convertible . Looking to find out what the top three screws look like?

Looking for either a bezel in good condition or a very poor condition one which needs a full restore....gauges not necessary but would entertain buying those as well. Non AC Must be willing to ship to Canada

Got my 833 4spd trans rebuilt, and I installed about 6 months ago. I have never driven the car only started the motor a few times with trans in neutral .."always." Recently sent car to go get an entire once over, (nuts bolt brakes fluids) as this was my first build ever. The shop called me...

Wow...really impressed with these TMI seats. Super comfortable and quality seems great. Made my own brackets. I'm not a great welder...but I can grind with the best of them!

Thinking of purchasing these rims to get the look I want without changing bolt pattern. I upgraded all my suspension on my 1967 Barracuda, keeping the 5 x 4 bp and am wondering has any warnings for me before I buy them. 17" 5 x 101.6 with 4.5" back spacing. Boyd Coddington Wheels...

Looking to buy the lowback pro series seats for my 67 barracuda. Anyone have experience with installing these? Do i need brackets or is it something easy enough to fabricate? Apparently, they have a brackets listing but none will be ready till July. I cannot wait till then. TMI Products...

Anyone ever tried these? I have a 67 barracuda and am thinking of purchasing. Boyd Coddington Wheels BC1-786445G Boyd Coddington Junkyard Dog Series Gray Wheels | Summit Racing

Installed new McLeod diaphragm clutch, removed the clutch spring above pedal, and had no where to hook the fork spring to so I drilled a small hole in the bell by the starter (as shown by yellow arrow). I need advice on how to set this up. I read to have the throw out bearing barely touching...

Could someone please post how the torsion rods are supposed to fit .... I have holes in the trunk lid hinge arms (Arrow pointing to hole)...I am wondering if the rods fit in these holes or slide under with a white nylon fitting??

Not my car in the pic, but it has the stripe I want for my 67 convertible. I would like mine to include '383' instead of the strobe but...Anyone know where I can get it?

Anyone have experience with ordering new chrome bumpers from Jegs? Thinking of getting a set for my 67 barracuda as it is coming back from getting painted soon and mine are a little dented. Got a price to get them fixed & re chromed locally and its a little pricey

Currently my , now getting painted, barracuda has my DIY dash bezel installed and after much 'humming and hawing' I've decided she's worth more to me. I'm not completely happy with the results. I can take a second attempt but If I'm honest I've always loved the original dash on these cars, so...

im not 100% but am wondering if I may be missing a needle in my u joint cap? There's not supposed to be a space is there?

bought a Borgeson steering box, pump and hose kit but as you can see, the return line is crazy short and the pressure line was super awkward to hook up. Seemed like the wrong kit! All was ordered at once so.... Anyone else have issues like this? Can I couple this return line? Or do I need to...

833 BB dust cover 10.5"

What is the ' recommended' minimum clearance needed between fan and radiator?

anyone know where I can find the nut that holds this ignition un place? 1967 barracuda

After reading a lot of 'how to install the torsion bar' articles, I followed them to a tee when tackling installing my new 1.03 bars from PST. I read that I should lower everything, remove bumpers, shocks, strut bars etc...which I did. I removed the adjuster bolts completely but found I...

I got my new bushings etc from brewers and installed but its been years since I removed the z bar and I don't remember if it was crooked...Wondering if this is going to be trouble?

Pic is of my motor before the rebuild. When I bought car the 383 was running pulleys like this...not touching but overlapping a fair bit....is this normal? Acceptable as long as belt somewhat true?

I am putting back together my car and forgot what was involved with this speedo cable of mine. It's an A833 4 spd and the speedo wires into an aftermarket gauge. Question is, Am I missing a shaft or something that fits in the centre holes? If so, where do I get one cause I have looked...

pics are from back view and one of me holding up pump to water pump housing....although the bracket fits great on pump, the middle hole lines up but no other bolt on engine lines up with this bracket. Supposed to fit "all" 383 engines but apparently not this one lol...anyone have a suggestion?

I need help with how to install the mounts on my 383. The drivers side looks fairly straight forward but the passenger side mount rubber is offset horizontally and looks off. The motor is suspended using a lift in pic so it it will swing into alignment. I'm just talking about how the pad sits...

I need to install a new 3/8 fuel line for my Holley sniper and will use my old supply fuel line as a return line. Question is, would it be ok to run it under the crossmember like this? I'm not sure if drilling a hole through it is a better option. I plan to protect the line with a longer rubber...

The door panels on convertibles apparently are prone to warping and cracking due to the sun beating down on them and I figured I'd post my little repair job. Didn't take long to heat up on low with a heat gun and I simply clamped the warped edge between two small lengths of wood and let cool...