Search results for query: *

So I would say you need to trim before you roll, the more metal you have on the lip the more stretch youre going to have to deal with as you roll it over. Also, use a heat gun (this is to make the paint more pliable so it does not crack).

Too low is subjective depending on what he wants or like lip roll and trim will help him lots at his height

I would trim and roll the rear lips... you will gain a good bit of clearance doing so.

yes i have read all about that. I know what the risk are and as someone else said, if you can smell the paint then your not safe. I always paint with well ventilation in the garage. I use a respirator mask and filter setup for painting. If i smell chemicals i stop. And yes, i learned the...

so here is my experience. 1 follow the datasheet for the primer you are using. i just use a cheap hvlp gun (100.00 range) for primer. make sure it has the needle size recommended on the datasheet. I have a 60gal compressor, but i think you could get away with a 40, maybe 30 or so. I dont...

i dont remember a thread, but i did see it as a solution to an issue on the show engine masters. they had to notch the plenum to get the EFI to run right. I do have EFI but running a single plane. i think it may have been this episode

solution............

ahhh, didnt assume he was staying with a smaller diameter wheel. So yeah the sidewall flex will hurt him much more then someone running a 17 or 18 :) yeah i rolled the Lips almost flat up top. Also running a dana 60 (hub to hub measurement was 57 1/2) in the rear with QA1 adjustable shocks...

Lowered with hotckis springs.... car sits pretty low and flat....i run a 285 right now but can fit a 295.

If you do the rear offsets and roll the lip you should be able to fit a 295 in the rear.... with the proper back spacing that is

Lol.... ain't That the truth!!!

that guy does really good reviews, his reviews were the reason i gave Tekton tools a try and so far have been impressed with, i have heard good things bout both harbor freight brands "yukon and us general" i have the husky box thats in that video, i am happy with the box, if it was used for...

ahhhh i gotcha now.......yeah tv providers do suck..... i can agree with that :P

here we go.......... so explain to me, if you are watching the show/channel on youtube. how exactly are you paying for it?

how do you feel cheated when you dont pay for anything???? i dont understand this handout society. i mean you obviously like the motortrend channel just like many of us i think. i am happy to pay the 5.00 a month for something i enjoy. finnegan and frieberger are by no means rich and put out...

What....no love for the non mags? :-P

actually looking a your diagram, i would remove the check valve that is shown between the pump and the pressure switch. because if it ever sticks or fails your pump will never shut off. as someone else has mentioned, we really need to know what kind of voltage and amps you are pulling, the...

you can fit a 10" wide in the rear all day long and not stick out like that. the backspace on the 8" must be pretty low on rumbles rear :P. Bernald13 search the wheel an tire forum for 72bluNblu, he has helped many (including myself with tire and rim measurements, very knowledgeable). you...

diaphrame is the mechanism used to create the vacuum by the driven electric motor (2 types of electric motors, squirrel cage and wound, refers to the relationship of the stator and rotor, setup differently in the 2 different types of motors) as for the heat. the heat soak into the electric...

my last dog was diabetic so we made treats for him. Made them with liver (we had found a recipe online) i personally cant stand the smell of liver but they were all natural and the dogs seemed to love them!

if your running any sort of fuel injection and the car will sit for long periods of time e85 can gum up the injectors. If you put boost in the picture i say definitely go e85, if not id say its a toss up for me.

The unit that was in my car was 10 amps. it is correct. its a small squirrel cage motor only driving a small compression motor creating 18-22in of vac. If you're blowing that fuse continually many things could factor. Bad motor, or excessive heat in the engine bay (as heat rises with...

i know its slightly off your topic, but any consideration to converting to manual brakes?? when i bought my car the PO had the same thing, same setup. I couldn't stand hearing the vacuum pump running every time i came to a stop or just tapped the brakes plus it was an eye sore in the engine...

LOL, i hear ya. im in my 30's, and it baffles me how much the current generation doesn't even know how to do basic mechanical things to there cars, i have cousins and people i work with that dont even know how to change their own oil or spark plugs. If seen more girls that know how to work on...

Im not sure why this even needs a thread, people use words wrong all the time, whats it matter at the end of the day? i mean where does the frustration for you stop?? i mean technically speaking if you repaint your car you are no longer restoring the paint you are replacing the paint and im...

ahh nice!! didnt realize it was so soon, unfortunately the fish still has a few weeks before its road ready. enjoy the show, not really many nice places to eat in elkton, north east is 10min down the road, woodys crabshack and steak n main are always good choices. or opposite direction go to...

Elkton is my hometown, lived there most of my life. Now live in delaware but not too far away. The cruise nights were fun, but it's been years since I have been. What's the date for this year's?

pulse width modulation...... can vary the speed of the electric motor

yeah PWM would be the biggest thing you would gain. but hey if its not a daily driver you probably wouldn't have to worry about it much either way.....but yeah, i am loving the FiTech so far :)