Search results for query: *

I have a 72’ Dart with a big motor, and still having cooling issues on a hot day. One of a couple changes I’m looking at is to upgrade my mech fan, but the challenge is due to the motor I don’t have a lot of room between the rad and the water pump pulley. Im currently running an 18” 6-blade...

Looking to buy a set of Mopar Ralley rims, 5x4" - 14x6 front with a 195/70/14 tire, and a 14x7 rear with a 215/70/14 tire. Talked with Coker, and they don't have the fronts and don't know when they'll get them. They also have no 195's at all, so they're kinda out. Is there another seller who...

Does anyone know whether the 1962 Dodge Lancer Wagon which came with a 170 slant 6 motor - was that the only motor ever offered from the factory? Was this car ever offered with a V8? As far as I can tell the slant 6 was the only motor, just looking to see if someone else knows better? Thanks...

Is there a preferred way for cooling? - electric fan or mechanical? I see pros and cons for both. I like the idea that with an electric fan I get the full cfm flow even while at idle. However electric is one more this that can break or malfunction. motor in question is a 572” Hemi with alum...

I’m replacing the motor relay, ballast, and ignition module in my car, and while there is plenty of China made crap out there, I haven’t found any place that might make quality parts for a premium. Can anyone recommend a good mfg for the above mentioned ignition parts? thanks!

Due to only having 1" between my radiator and water pump pulley, I've tried a number of "plan B" cooling setups with no luck, and am slowly resigning myself to a less than desirable option - relocating the radiator forward to create some room. MY preference is to install an electric fan, so I'm...

this one is for those who are good with diagnosing issues with little info..lol I’m working through an over heating issue, and we’ve address what we think it part of the problem. The other part is pictured here. Looking into the top of the radiator down the fill tube, you can see all these...

This is a repost of a closed thread, but I’m still looking: Wanted: 1961 Dodge Lancer 770 Station Wagon This car is extremely hard to find, but if anyone knows of one that's available, please send contact info or put me in touch. Happy to pay finders fee for the location or link to a car that...

Here is my 1972 Dodge Dart project, after three years worth of work. To start, I have to give a big thanks to Denny (HemiDenny) from HDK suspensions, who did all the heavy lifting for this A-body conversion, can't say enough about the man or the suspensions he builds - if you're looking for a...

I have a 69' Dart that I'm installing a HemiDenny front end in, and I'd like to upgrade the rear suspension as well -but not a 4 link. This is a daily driver car with a 340 / 4 spd. Currently has the original leafs on them with a set of generic airshocks that have a slow leak in the system - I...

Looking to see if anyone knows if the guy making the flip top cap adapters gas caps is still making them, and where to get one? Here's the old thread but it closed in 2016: [FOR SALE] - Ask and you shall recieve! (Flip Top Gas cap Adapter) Are these still available, or does anyone have one for...

I'm looking for a dash instrument panel for my 72' Dart in good shape. Can be with or without instruments, but plastic and tabs need to be in good shape. Can be with or without seat belt light opening. If you have one you can part with, please PM me here. I have good cash for good parts...

Looking for a hood for a 1972 Dodge Dart, in good shape, no rust, still painted pref. As these are difficult to ship, looking for potential sellers in the NY, PA, OH, MI, NJ areas where I could pick up. please PM me here with any details. Thanks!

Looking to see if any mfg makes a new hood for a 1972 Dodge Dart? AMD make a 67-69 hood, but not a 72'. Classic Industries, Year One, etc. don't make any, since likely it would have come from AMD anyway. Does anyone know of a mfg that makes new steel hoods for a 72' Dart? Short fo that I'd...

Working on a project, and finding I have little to no room for a mech fan, so I'm considering electrical fans. My issue is that there is very little room. Per the photo, assuming I change nothing else, I have an outside area of 27 x 17, and only 1.5-2" depth between the radiator and front of the...

This is a repost of a closed thread, but I’m still looking: 1961 Dodge Lancer 770 Station Wagon This car is extremely hard to find, but if anyone knows of one that's available, please send contact info or put me in touch. Thanks in advance....... Last post someone mentioned they had one in...

Looking to add a billet aluminum fuel filler and cap to my 72’ Dart. Only one I’ve found is with Classic Industries, and it’s a universal fit - some fab may be required. Well I got this one, and while it’s a very nice piece, it doesn’t fit - and the amount of fab work required to make it fit...

1961 Dodge Lancer 770 Station Wagon This car is extremely hard to find, but if anyone knows of one that's available, please send contact info or put me in touch. Thanks in advance.......

This is a repost of my original post, as the person I thought was going to sell me the emblem backed out. Looking for a hood emblem for my 69' Dart. Current one is snapped in three pieces. Thought about simply gluing back together, and is still an option if I cannot find a new one, but woudl...

I'm looking to add a front lower lip / air dam (seen it called many things). I did a search here but didn't see anything come up. Looking to see if there are any sources for a lower front air dam for a 72' Dart - or is there one for another car which is close enough to use with a little bit of...

I have a 69' Dart that I'm putting on a Wilwood disk brake kit. The 15" rims i currently have will not work, because the center hub diameter is not large enough. I'd like to replace them with a new set of Mopar Rallye rims in silver. Looking to do 15x7 in the front on 1/2" studs, with 15x8 on...

Looking for a hood emblem for my 69' Dart. Current one is snapped in three pieces. Thought about simply gluing back together, and is still an option if I cannot find a new one, but woudl like one still in one piece if possible. Emblem goes on the leading edge of the hood on the driver side...

Looking for a set of good hood hinges for a 1972 Dart - cannot seem to find a set anywhere. Thanks in advance!

I was planning on going to MRL for a build, and now that I'm' ready Mike is no longer in business. I did a search on this forum ands the web, but didn't find anyone else that just jumped out at me. Can anyone here recommend a build for a motor build? Its a 340 motor for street use with a 4 spd...

I have an Eagle 4 post lift, with one manual sliding bridge jack, and need to get a second in prep for the HDK project coming. As I understand it, I need to stick with a "sliding" bridge jack, I cannot use a "rolling " bridge jack. With that said, I was looking for a sliding bridge jack good...

ive done the searches, but haven't found what I'm looking for, hence this thread. This winter I'm going to do the HDK front end, disk conversion, etc. and want to go with the 2" drop spindles and larger wheels with flatter rubber for that Autocorss style look. What I cannot seem to find in any...

I have a 1969 Dart swinger, and on the driver side leading edge of the hood is a "DODGE" emblem, measures 6.5" long, lettering is 3/4" tall, and has three prongs on the back. I cannot find a reproduction or replacement anywhere. Current one is broken into three pieces. Anyone have any ideas on...

recently picked up a 1969 Dart, 340 w/ 4spd. In no particular order, I'd like to do a motor and train rebuild, an RMS front suspension - maybe rear as well, disk brakes front and rear, and new wheels/tires to go with it. What I'm looking for input on is what order to do these things. My...