Search results for query: *

Just put together a 360 Magnum and I completed a run down on my Jed Clampett Run Stand!!! Everything is great with the exception of my oil pan is leaking while it’s running on one side only. 360 with a windage tray for a 360 (holes are slotted) I put 5 qts of oil and one bottle of STP Oil...

Was installing the timing cover on my 360 and saw the handwriting, then remembered I got it from Roy aka SGBARRACUDA. I had texted with him a few days prior to his passing last January about some parts and then… found out he passed! Funny how life works and things come out of nowhere...

Crane Cams 64770 Ductile Iron Rocker and Shafts. Rockers were on the car when I bought them, took them off as the previous owner had the wrong push rods for the cam and lifters. PR’s are measuring 8.28 not sure if that is totally accurate as I did use a Harbor Freight Micrometer. The hold downs...

I have a new in the box, box was opened to inspect! No longer needed as build has changed! Scat 360 Standard Stroke Cast Crank, it is internally balanced. Scat # 9-360-3580-6123-9000 Here are the specs on it: SCAT Engine Components 9-360-3580-6123 Scat Cast Crankshafts | Summit Racing...

I have a set of used 8mm Low Ohm Packard wires of my 383 that were cut to fit! Less than 50 miles on them. I have also added some left over that I will throw in in case you need to make a longer coil wire. Switched to Small Block and no longer need! 25$ shipped to the lower 48! Located in...

Have Brand New CVF HF 2 Groove Crank Pulley. I accidentally ordered 2 of the same, they list for $92 plus shipping. I will sell it for $92 shipped!!! Chrysler Small Block Crankshaft Pulley 2V - High Flow Next up is a Flexplate for 5.2 and a 5.9 Magnum, either one is $25 shipped or $45...

These are Schumacher SB to BB Mounts, I just took off my 383 I pulled from my ‘69 Cuda with SB K-Member with PS. You can still get the install instructions from Schumacher website. No part numbers that I can see on them. $120 shipped to lower 48 Paypal accepted. Located in St George SC 29477

Looking for an A Body Center Console Ashtray Door. Not concerned about pitting or looks as long as there are no holes. If you have both parts I’m interested, but mainly after the door. Located in Saint George SC picture for reference.

Will the front door panels off a 71-72 Duster/Demon interchange with 67-69 'Cuda's, everything I'm looking at photo looks like the hole line up, was just curious if someone has tried this. Top photos is Duster and bottom is Cuda.

Crane Cams 64770 Ductile Iron Rocker and Shafts. Rockers were on the car when I bought them, took them off as the previous owner had the wrong push rods for the cam and lifters. PR’s are measuring 8.28 not sure if that is totally accurate as I did use a Harbor Freight Micrometer. The hold downs...

Thought I would share in case anyone is interested or thought of trying it. I am gonna to try and create the Commando VC’s with my original Magnum VC. Got my HeatSinks in today and set them on top and I think by the time I have them milled to fit around the grommet holes and oil cap, I...

383 Mopar Shortblock is .60 over with a Lunati 292 Hdy Voodoo Cam, steel crank. I have the 2 sets of 516 heads that go with it. Motor has about 500 miles since rebuilt... I did not rebuild it, was supposedly recent rebuilt when I bought the car. Couldn’t Get the headers to stop leaking at the...

4l60E to Mopar Big Block Bellhousing. It has never been ran on the street, I did fire the engine up but the headers started leaking water around the exhaust bolts and after 2 try’s with different heads, I decided to just go back with a small block with stock manifolds. This was part of the...

Looking to possible trade an Edelbrock 1407 Carb for an A Body console. Carb was running when took off, it’s been off about a two years and I would think it will require a rebuild. It has a Russell banjo fuel. located in South Carolina @29477

Set of MP big block valve covers, they were new when installed, the baffle screws were broken when I bought them. They are circled in the photos. No Cracks in the covers, I ran them for about 20 minutes and my heads started leaking again around the exhaust manifold bolts. The breathers are used...

Schumacher Headers for an A-Body Swap $450 Mopar Performance ValveCovers $125 Crane Adjustable Ductile Iron Rocker Arms $300 Fel Pro Oil Pan Gasket $25 Headers were Ceramic Coated when I bought the car, they were chipped in a few places so I sprayed them with VHT and wrapped them...

Saw this on Facebook car is located in South Bend Indiana! No title just a bill of sale! Guy wants $350 for it! He’s saying if he doesn’t sell it... it’s going to the scrap yard! Hopefully someone can use it! To far away for me here is South Carolina!

10.95" Disc Brake Slider Caliper Brackets by Mancini Racing...these are brand new. I bolted one one and decided I wanted to go with the 11.75 rotor instead. $65 shipped to the lower 48 states. Shipping from St George SC, 29477.

Used Edelbrock 440 Performer #2191 I cleaned it with some Aluminum cleaner...it can be ran as is or you can blast it and it will look show ready! Located in St George SC, 29477. Asking $150 plus shipping to the lower 48! Let me know if you have any questions.

Used Hydraulic Flat Tappet Comp Cam and Lifters for a 383-440. I was told by the guy that they ran it in a dyno engine and then we’re taken out after break-in. The lifters are boxed in order for each cylinder. It’s a Comp Cam 21-228-4 Kit Here’s the link to Comps site for the specs...

Recently a good ‘Ole Boy and his girlfriend we’re riding down the road during a heavy T-storm, when out of nowhere his girlfriend yells “Stop!!!!!!” He slams on the brakes and before he could stop good...shes out of the truck running down the road in this major thunderstorm!!!! She bends...

Set of upper control arm bushings!!!! Brand new in the Box Moog K7103 I bought these to rebuild my factory upper control arms...instead I went a different route with the Qa1’s and now I no longer need them. I’ve looked on eBay and the cheapest I’ve seen with free shipping is $28 per box...

RMD or Peak Dash for sale...not sure which as it doesn’t have any identifiable marks or stamping on it. After research I’ve discovered that RMD was bought by Peak and used the same jigs to build there’s also. I know these are getting more difficult to come by...I test fitted it in my 69 Cuda...

AM Radio was taken out of my 69 Cuda prior to my buying it. It was in the trunk when I bought it...I have not tested it, so I have no idea if it works or not. No Paper tags to ID are on it, previous owner stated it came in car when they purchased it. I did open it up and it’s pretty clean on...

It So I got this in the mail today from a recent purchase! I bought for my 69 Cuda only to discover that it maybe for Duster or Demon non-rallye dash...the washer switch is beside the light switch! It doesn’t have th dash door...it came with just a factory door. It looks like it could be an...

1 727 1973 TorqueFlite less than 300 miles on rebuild. It was in my 69 Cuda when I bought it last year. I’ve put an overdrive in it and I’d rather it go to someone who will use it rather than it just lying around. It comes with a 440 source flex plate and stock converter, tail shaft is...

Spending the first day on the lake this season here in South Carolina with the Wife!!! She’s chilling on the bow soaking up the rays while I just sit back and admire the view!!!!

When I bought my B’Cuda it kept hearing a slight knock at idle and would go away around 1500 rpm’s. I have adjustable rockers and was wonder if it’s normal for them to “knock” at idle or if the spreader spring is to weak to keep it from walking? I haven’t adjusted them yet wanted advice...

Brand new A-body 727 Trans mount Part# 5.1112R it is Polyurethane and not rubber. Paid $56 will take $40...shipping included! Thanks for looking!!! Todd

I have a new never used repop ignition switch for a 1960-68 Barracuda, Valiant or Dart it may fit others just not sure! I bought it by accident as a ‘69 Cuda is of course...a one year only switch! It does come with the key cylinder and keys! Will take $35 and includes shipping! I paid $60 plus...