Search results for query: *

I bought an older lakewood 2 piece bellhousing for my big block and it didn't come with a block saver and I would like one because right now it looks like I'd have to lop off a lot of my input shaft because my crank isn't drilled for a 4 speed. Just wondering what's the normal thickness or if I...

Putting together my steering I can't tell if this is right, I kind of have to push up and it feels like bend the idler arm stud to get the linkage onto the steering box! Just wondering if this is wrong and what to do if it is!

I was just wondering if the only difference between 10.5" big block bellhousings for different makes of car is where the clutch linkage is? Or are the ones from other cars physically bigger that they won't fit in the tunnel? The clutch linkage location doesn't matter to me because I have a...

I've been looking around trying to find somewhere it would tell me the valve spring height and installed pressure but I can't find it anywhere. Some insight would be nice! Thanks!

Why on earth do they recomend a valve spring that can't possibly fit on a stock head!? I realize maybe I should have done some measuring but I didn't think I could go wrong with the manufacturers recommendations!

I initially planned on getting a BH513R-S reproduction bellhousing with a 4.354" retainer hole but they're out of stock, any other options out there?

Just wondering if anyone has seen this and what's the best way to fix it!? @72bluNblu ?(I know this is kind of your niche!) Good thing my engine was running like crap last summer or I would've driven it more and it could've been catastrophic! Also how do you remove the pivots out of the LCA's?

Just figured I'd post this for anyone who isn't on the gen 3 Hemi swap Facebook page or just hasn't seen it! Maybe makes it more convenient for people trying to come up with a fuel system! Holley 12-319 Holley 255 LPH OE Style EFI Fuel Tank Modules

Where does a guy get engine mounts for a 73+ v8 K-member for a big block? Schumacher seems to be going out of business or something and Mancini says they are not orderable on their website... Any other places their sold?

I just picked up a Hemi out of a 2011 truck for 100 bucks Canadian so like 75 American! The guy said it was running rough so they replaced it without checking what was wrong! Initial inspection looks good so far but I only had time to take off the valve covers and one head! I know the lifters...

Sorry if this has been discussed somewhere I looked and couldn't find anything! I have a lead on a 06 Hemi out of a Chrysler 300 for a 500 bucks Canadian! I was just wondering what kind of cam options are there? Or am I better off swapping to eagle heads and using a 6.4 cam, or can I use that...

I want to buy a rebuild kit but I'm not sure if it's a Saginaw or a federal.

This past summer I went out to work on my dart and my quarter window was all shattered, still all in one piece but spiderwebbed all over. No signs of impact or anything, I've seen another forum with a guy saying this happened to him. I think mine shattered because my track was messed up. So what...

These are the wires that came off of my ammeter, would it be dangerous to use them to supply power to a fuse panel? I assume the answer is yes and if so, where would I grab power from for this fuse panel? It'll be for supplying power to my fuel pump, line lock and aftermarket gauges and lights.

My 360 in my 75 dart backfires bad on the top end, it runs ok idleing and through mid range but when i stomp on it it back fires like crazy out the exhaust and sometimes out of the carb. The timing is set to 10° before. I took the carb apart and there was some junk at the bottom but after i...

Im working on thinning out the underhood wiring in my 75 dart. Any ideas?

I'm looking for the driver side quarter glass for my 2 door hard top swinger. Thanks!

This yellow box was unplugged when i got the car and i have no idea what it is, any ideas?

This feels like a dumb question to ask but here goes. I was reading the article by Steve Dulcich about switching out the stock gearset for the passion od in the A-833 and the article left one bit of info out for me. Does the passon gearset go into an OD case or a non overdrive? Or can it go into...

Looking for an A- body clutch and brake pedal assembly!

One of my side adjuster locks has disappeared and I need another one, who sells em?

I've already got a project in the works... But hey you only live once right! No motor but I've got a 400 I'm building and an 0/D 4 speed to put in it and will eventually be upgraded to a 470 and a non O/D a833! Bought a us car tool tub and spring relocation for my dart but if the 318 is staying...

What's a minty one go for? Buying a duster and the guy is asking 300 bucks extra for the grille. No headlight bezels though.

There's a 70 duster I'm looking at for 3 grand Canadian. No motor, rockers need replacing and it needs inner fenders and a trunk. I just bought another duster for parts so I have all that stuff already, is that a good deal? It's got an 8 3/4 and other than the rockers it seems really solid. It...

This duster came up for sale for $650 here in Canada and I jumped on it, one problem though is that all he says it has is the fender tag and no vin on the dash. Any way to get it street legal without that? If not I wanted to use the bumpers for my dart anyway so it's not a huge loss. But if...

There is a guy selling two a833 transmissions, both for a bodies, one for $700 or both for $1250 (I'm from Canada so that would be like $530 and $950 US) I'm just wondering if that's a decent deal or is there cheaper options? And if this is a good price, would it be worth it to buy both? I...

I've been reading all of these restoration forums and figured I'd start my own so I could look back on it one day. I picked up this 75 Dart this last winter for 400 bucks and a 300 dollar gun. It's a 318 auto car and the plan is to put a low deck big block and an a-833 in it! When I got it...

So I live in the wonderful land of Canada, where the beer flows like honey and the rust wrecks cars faster than the Duke boys can. So needless to say I need to replace my floors. Right now my 75 Dart Swinger just has the original 318 and the 3 speed torque flight but I'm planning to put in a...