Search results for query: *

Okay, thanks for the info. I will work it from here.

Was that on a slant 6? Do you have the stock number?

I am looking to replace my radiator in my 65 Dart GT with 225 slant 6 automatic. Can anyone suggest a good replacement?

Sorry for not updating. After all the wire chasing and replacing the turn signal switch the problem continued. Sometimes working other time s not. The cause was a broken wire right by the brake light switch. It would work if I was down there testing because I was touch the wire but not when I...

65 Dart Gt 225 with automatic. When I first start the car and try to drive it the tranny dos not engage fully. It seems to be slipping, no chatter or clunking. I have changed the fluid and filter with no change. Once it warms up (1mile) it works fine. Is this common or do I have an issue that I...

Drivers front top fender trim that runs from the GT raised emblem to the door line?

It is a floor shift automatic. 225 auto, PS PB with Mustang bullet wheels. It looks good in a pic but it is not the best example of a 65 dart gt. Paint is hiding a lot of Demons.

Just updating the work my son and I have done on his Dart. Swap the distributor for an electronic one, at the same time a full tune up. Replaced a lot of wiring in the engine bay due to it being brittle. Cut and made new kick panels and added a couple of speakers to them while we were there...

what is the thickness of the spacers?

1965 Dodge Dart GT 225 slant 6 auto, PS PB Blue with light blue interior. Rebuilt brakes, front end, upgraded to Elec ignition. Fair condition all around fun driver. Asking 5500. Car is in the Dallas area, can be driven home. Text or call XXX_XXX_XXXX Phone numbers are not allowed.

Do you still have the 14 inch rims with center caps? I'm in Grand Prairie and have a 65 Dart GT with mustang bullet wheels now (17 inch with spacers) and think those would look better on my Dart. Do you have any room on the price? Or do you need to trade for any parts or tires?

1965 Dodge Dart GT 225 At PS PB with 123K miles. We had a sudden miracle with the lights. After running a test probe on every wire the brake lights started working. Maybe a loose contact somewhere but they work and I have a nice working cancel cam to boot.

Okay with all the testing and consulting with A body gurus I bought and installed a new turn signal switch. I still have no brake lights and I am out of ideas..............any help of what to test or where????? I have power to the switch, it does energize when the switch is depressed and sends...

The switch is my issue, I have already talked to Dan about ordering one of the ones he carries that are a direct replacement. Thanks again for the sounding board here, it keeps us driving.

The switch is hitting the arm and working properly. I tested the switch and its operation.

My brake lights stopped working. They worked fine last time I had the car out. I have checked the switch and it is working, I have power from the dual pink wires and when depressed I have power on the other side of switch (white wire) . From that point I don't have power to the bulbs. Tail...

I have seen all the above, no thanks. I have a driver and a piece with a few blemishes will be fine if not I will keep driving it with no trim at all.

I need the passenger side front trim for a 65 Dart. The trim that goes from the bottom of the grill and circles the headlight. Shaped like a candy cane. I will take both sides if available, mine are rough or missing.

Had not looked at my mail box. I emptied it. I live in Grand Prairie and heading to my buddies shop today in Haslet to rebuild the front end of my 65 Dart. Give me a call sometime to check out the rides. 317-694-7159 Brian

Do you have the candy cane trim for sale?

Could not send a PM, maybe too late for the UCA but I am in Dallas. Love to come check out your rides sometime. Contact me when you have time . BT

An interference engine is a type of 4-stroke internal combustion piston engine in which one or more valves in the fully open position extends into any area that the piston may travel into. On yours I would think the belt may have jumped a tooth or two.

Me and my friends are heading to Conroe for the weekend and check out this swap meet. first time to Conroe for me,

What are doing with the 273? And where is Leonard

Has anyone retrofitted a power steering rack in an early A body with the stock k frame? I would like to see what rack they used and how it was fitted.

Well I ordered the front end rebuild kit and about to order the Pirate Jack disc brake kit too. I plan to rebuild and repaint the entire front end suspension as I go. Also will reinforce the lower control arms. I will do my best to photo and document the rebuild.

How soon do you need a set? I am about to install a disc brake set up and will not need a pair of mine.

Not a Bob. Brian

I am working on upgrading to disc brakes and want to know if pirate jacks brake set up widens the front track by any amount? I have wheel options and want the measurements before I start. 1965 Dodge Dart GT /6 auto 9" drum

GT 225 AT 125K