Search results for query: *

Taking my 69 340 to the Dyno in a couple of months. Just curious what everyone thinks since we are on the topic. .030 over TRW flat tops 10.5:1 X heads RPM Air Gap Holley fuel pump Holley 670 DP TTI Headers FBO Ignition This is just going to be an engine dyno. Car is not ready yet. I’ll post...

Eagle Rods Forged TRW flat tops I’m not familiar enough with machining to know but I hope everything is right. The builder has a good reputation so of course I put all my trust in him.

Early cast

Thank you for the lesson I love learning something new every chance I get. Still learning as I go. I changed timing cover and water pump.

Nothing on the face so good to go there. Thank you

I have a 72 340 I had built with a forged crank. The guy I purchased crank from sent harmonic balancer with it but not sure if its the correct one. My flywheel will need to be changed for internally balanced crank as well? Any input on these pics and what I need to do would be greatly...

I have a Torker II 340 in excellent condition.

I have the Box out of a 74 swinger. Not sure if it’s the same?

Fronts are GT Radial 1617 Rears are Mastercraft 3917 Front tires have 0 miles rear tires have about 10 miles they’ve been sitting in my shop not out in the elements I understand they were not made yesterday but they are like new no dry rot The wheels are in fair to good condition

Sorry about that it’s empty now

I can ship not sure how much it will cost but I will find out and let you know

I have a 74 Swinger I’m parting out. The car is all original with title. I have used some parts for my project but a lot remains intact. 318 w/904, Hood, Trunk lid, Tail lights, fenders, doors, 8 1/4 rear end, front and rear glass, hub caps, badges, grill etc. It’s hard to list everything but if...

I have a nice set of 4 wheels 5x4 with center caps dress rings and new tires. Fronts 205/70R14 Rears 235/60R14 Im located near Anderson SC 29655 $500

Ok thanks appreciate the info already called machine shop taking down to bare block.

1/2 inch

Dimensions of what

W what other pics you want I will send 100 pics if that’s what you need just looking for some advise not trying to start a pissing match

Another of piston

This is the cylinder that has the piston in upside down. No loose springs etc.

Yeah I’m seeing a lot of short cuts on this car. It’s mine now! Time to do it right. Love all the info thanks again.

Ok I’m tearing down to the smallest components. Thank you for all your help. I will update in near future. And yes liquor was prob a factor. Can’t fix stupid.

Any reason to remove rotating assembly or just repair heads?

Here is the piston

I don’t know the history on the motor I just bought the car a little over a year ago and haven’t had time to really drive it much it started making a slight knock so I stop driving it pulled the engine and found the metal. After I left this post I pulled the heads and somebody put one of my...

OK so I’m going to make a long story short my engine was making a very slight knock so I pulled it it’s a 340 out of my 69 Dart and I found these in oil pan. Any ideas where they came from?

Ok yeah great chart. Just a couple differences from what I use. The red works great on jewelry the blue is a finishing compound. Post more pics of your parts as you polish.

Not sure exactly what brand your white and green Rouge are but generally speaking the green is your stainless compound which should be used with a sewn wheel and the white rouge is about as fine as you can get and that should be used with a loose cotton I don’t want to sound like I know...

A 3/4 hp 3450 rpm buffing machine will work good. A slower rpm machine say around the 1100 rpm range is for wood and plastic. Every wheel and compound has a purpose. The condition of the pieces you are buffing will determine what wheel and compound you use. Generally start with a spiral sewn...

Iva SC zip 29655

I have a third member that is 3.23 sg 489 case. Everything works as it should just going with something different now. Could use some paint but mechanically sound. $500 plus s+h