Search results for query: *

Looking for a black 66 ply valiant seat belt retractor with seat belt in good condition THANKS Roger

I have for sale a matching set of 340 rods in great condition , checked and sized ready to go, $140.00 PLUS THE RIDE. THANKS FOR LOOKING AND HAVE A GREAT DAY

Seams like with all the stuff that has been done to it by different folks maybe someone put a gear drive in it with the cam change. just a thought

I have used in down the center on side trim moldings goes on easy and stays in place. When I powder coat on raw metal i just clean with acetone, you would probably need to strip all of the painted areas you want to redo, clean and then powder coat for it to grab. I think powder coat would do...

OK I see what your talking about, man that is not going to be easy to mask and paint. if you are just doing the black what about pin striping tape in different widths works pretty good on side trim moldings.

Google heat lamps for powder coating there is a video for curing powder coat for items to large for an oven. Amazon has two that are 24 in. in length for around $50.00. If you do not have the powder coat painting equipment Harbor Freight has one that works pretty good I cant remember the price...

because of the size you may need to have a powder coating shop do it for you it is a common practice for them I think but the end results will be great. Go on line to ebay look under dodge power wagon emblems scroll till you find my d 100 that sell for $85.00

powder coat the whole part and with your finger remove the powder from areas where you do not want it, bake and WA LA PERFECTION. Take a look at my dodge power wagon emblems D 100 200 and 500 on ebay.

I will hold off on purchasing yours in hopes that I can find a complete set but will keep yours in mind if I do not. THANKS Roger

If you have the barracuda parts can you attach a photo of what you have and I will compare it to the broken parts that I have. Thanks for your response to my search . I would think they would be the same. Roger

hardtop

Needing a set of A pillar trim covers black would be great but what aver you have ( in good condition ) I can make work THANKS Roger

Thanks for all your responses to my request I did find what I needed. take care and have a great day. Roger

Thanks for your response but i just purchased one from another member. Take care and haave a great day Roger

My pads and ash trays are good just need one with good mounting screw holes. how much are you asking for the one you have with the pad and how much for the bracket only. Roger

I will check out the photos tomorrow and get back to you. thanks roger

No problem on color I will repaint, just so there are in good mounting condition. I will check out your photos tomorrow. THANKS Roger

I NEED A ARM REST MOUNTING BASE FOR DRIVERS SIDE REAR SEAT THANKS

This worked for me, not much welding and a great connection for all directions

now I have tears

I have a 66 valiant that I put a 8.8 in, I'm not sure if the under side is the same as a 67 but with 8 in. wheels and 8 in. x 26 in. tires I needed 6 in. back spacing to get the tires inside the quarters.

Paper route in the am and setting pins in bowling alley at night when I was 12. LIFE WAS GREAT IN THE 50'S

Im looking for a set (R&L) B (lock) pillar original top seals that are in good condition, I have the ones from Steel Products but they are not the same as factory. THANKS AND TAKE CARE Roger

I had seen an article on the QA1 set up that I liked and being kind of a cheap guy I just made up all of the parts for my Valiant build, what I really like is that it is fully adjustable and lighter then the stock components plus using the 8.8 diff. you have a limited slip, 31 spline axles, 3.73...

more photos of the under side

They are 1 & 5/8 into 3 in. collectors and fender well tubes with down turn stainless elbows (not shown) and JET HOT coated, there is not much room for them but I wanted to fill the engine bay for appearance. You can't find anything like that so I had to make them.

This Valiant is still in the build stage, some of the highlights rotisserie body work, 8.8 tri angulated coil over diff, disc's front and rear, 360 la .030 over, h beam rods, kb 107s, some porting mainly bowls and port match comp 20-230-4, 274 with .502 and .511, 750 d/p, custom fender well...

I am looking for the driver side quarter window hinge, and i know that as soon as I purchase one the one that I have lost will turn up and I will be able to help some one out with one. Thanks in advance for the help. Take care and have a great day. Roger

I have one in kingman AZ

That's God telling you to buy American