Search results for query: *

Have an NOS oil filter adapter, aluminum, still with the original box from Trans-Dapt. comes with bolt, gaskets, but is missing the threaded piece for the filter atachment. $90 plus shipping from Savannah, Missouri. Will be at the Mopars Invade MoKan race and swap next month, could deliver there.

I got to thinking about my front engine plate and water pump as I assemble my 340. The front plate will sandwich between the timing cover and electric water pump. I'm intrigued about possible turbulence or air pockets that may happen in the void in the cover where the mechanical pump impeller...

Set of 4 15x7 Rallye wheels, 4.5" bp. Comes with two center caps, no trim rings. They're mounted on some old but barely driven on BFG tires- 275/60s on the rear, 225/70s on the front. I can dismount if you don't want the tires. Asking $800 for the set, located one hour north of Kansas City, MO...

Just as the title says, I'm missing a single bolt for a Suregrip I'm building. Left hand threaded 3/8-24, 2 3/4" long. Holler if you have one laying around. Thanks!

This is a 1966 833, with 26 spline output. Everything you see in the first pic- Smallblock bell housing, clutch fork, Flywheel, tunnel hump, pedal set, ball studs, etc. The Z bar isn't correct for A body, but could probably be fabb'ed up to work. I may have an A body Z somewhere. I also may have...

I found this pulley in my stash, hoping someone can tell me what years it came off of, etc. It's a three groove, cast iron, only markings are "C168" and "mapco". Bolt pattern appears to be asymmetric. Thanks for the help, and it's for sale if somebody needs it.

Hey yall, looking for opinions and insight. I'm building up a 340 for a tube chassis 87 Charger. There's a thread on here on this basket case that I'm slowly making progress on. It'll be around 13:1, iron heads, running on E85. Prior build had the simple crankcase evac to the collectors from the...

Looking for a pair of 15x12 wheels with 3.5" to 4" backspacing, 5 on 4.75" pattern. I prefer some Weld Draglites to match my current front runners, but will consider other styles. Located in nw Missouri. Thanks.

So it's not an A body, but contains A body parts, hope this is allowed. I thought it would be nice to chronicle this journey and my learning experiences that others may learn from. I'd been looking for a small Arrow, Charger, Daytona, etc to make into a dedicated track car. My '67 Dart in my...

As the title states, I'm in need of a pinion yoke for a 489 third member I'm building. Needs to be fine (29) spline, 7260 u-joint style. Thanks for any help you can provide. Also have a coarse spline yoke if anyone is in need...

Smokin' Mo-Kan Dragway - Asbury, Missouri - mokandragway.com - Mopars Invade! MoKan Dragway is a 1/4mi track in southwest MO near Joplin. I drive 3hrs down every year, my favorite race of the season. Saturday April 2nd, 20th annual event. Always a fun event with various race classes, lots of...

I read the rebuild in the how-to section, and just tore into a cone suregrip that was one-legging when I removed it from my car. I expected to see the cones bottoming out in the case like the how-to thread, but this wasn't the case. I put some clay between and rough measured .036" clearance...

Kevko has a 15% off sale this weekend, and I'm looking at their M321 pan for a 340 I am building, going in a '86 Charger chassis car. Anyone used this particular pan? Looks like a good design with only 8" height, rear sump, and built-in scraper and windage tray... just curious if others have...

727 question! Freshly rebuilt 727 with TransGo TF3 kit. Low seems to be binding up. One time I couldn't even get it to pull itself in the shop. Did a short road test and shifts didn't seem very firm. Adjusted bands according to TF3 instructions. Just did pressure tests on front, rear, and...

So I just scored a deal on an AussieSpeed short runner 2 barrel intake. I had a BBD on the shelf I was going to throw on it but the bolt pattern is narrower than the intake pattern. The Aussie intake is set up for a Holley/Weber pattern apparently. So my question is what carb should I be on...

19th Annual Mopars Invade Mokan Drag race, swap meet, and car show at MoKan Dragway in Asbury, MO (southwest MO near Joplin). Link to event flyer: http://www.mokandragway.com/pdfs/mopars_2021.pdf I make the 3 hour drive from north of KC every year to this fun event. Lots of A body's racing...

Video: Building The World’s Most Powerful Jeep Inline-6 Engine It's not a slant, but it's a Mopar buzzin half dozen. Stock block, crank, and heads makes it all more impressive.

I have a 74 Duster that was originally column shift automatic, prior owner installed floor shifter. Looking to switch back to original column shift, and need the linkage from column to trans and associated bracketry. 360/904. Let me know if you have what I need. Thanks

Hey Mopar gurus, I'm just getting around to running my 67 Dart on the track. So far just 1/8th mile, as that's my local track. It's best ET is 7.68 @ 90.18mph with a 1.70 60' on the following setup: 410 small block with ported Eddy's TTI step headers 1.5 Crane gold rockers Hughes hydraulic...

18th annual all-Mopar race, swap, and show Lots of open track time, with 1/8th and 1/4mile bracket racing in the afternoon. Lots of swap meet vendors and good turnout of car show entries. Saturday, May 30, 2020 Gates open at 10, racing at 11, bracket gamblers at 2. $10 entry $20 for unlimited...

18th annual all-Mopar race, swap, and show Lots of open track time, with 1/8th and 1/4mile bracket racing in the afternoon. Lots of swap meet vendors and good turnout of car show entries. Saturday, April 4, 2020 Gates open at 10, racing at 11, bracket gamblers at 2. $10 entry $20 for unlimited...

Set of four door panels from a '75 Dart. All in good shape with clips. Asking $75 plus shipping for all 4. Also have a blue decklid from same car for local pick-up. Located in Savannah, MO, just north of Kansas City.

Hey guys, I have a 67 Dart 2dr HT, just installed headliner and sail panels recently. Both came from Year One, sail panels were included in the headliner kit. I never liked the odd leading edge angle of these panels, it just doesn't look quite right. After two weeks, the material began to...

Saturday April 6, 2019 MoKan Dragway in Asbury, MO (west of Joplin near the MO/KS line) Swap meet, car show, drag racing. I am not in charge of this event, just a regular attender that always has a great time. Lots of A bodies and good swap meet vendors! We drive 3 hours to this event every...

I've researched on here and found that there aren't really aftermarket options for 67-69 Dart fabricated gauge panels for round gauges. Short of fabbing one up myself, I'm hoping to find a pre-made alternative. From what I've read, the only place that made them is no longer in business. I am...