Search results for query: *

Nice Holley 4779 750cfm mechanical secondary carb and Summit -6 AN line. Little time on complete rebuild. Ready to bolt on and go. Has non stick gaskets, 50cc secondary accelerator pump,threaded brass jet extensions with notched secondary float, tygon seals on the idle mixture screws, new...

Set of small block LA stamped rockers with shafts, hardware and new pushrods. Used these in my 360 for awhile before building my 5.9 Magnum. These are just sitting around. $60 shipped lower 48! PM me! Thanks FABO!

Selling these Magnum covers. They are in good shape, no nicks or scratches in them. They were on a 318 Durango. Little dusty, and could use some clean up underneath. Baffles intact and come with the caps you see. $130 shipped lower 48. PM me! Thanks FABO!

90* adapter and bolt as shown. Good shape cast iron, off my LA360. $50 shipped to the lower 48! PM me if interested! Thanks FABO

Ran this in the Duster and was an excellent cam, motor was bone stock late '70's 360 out of a pickup with an Air Gap and Holley 750 and it ripped!. Swapped motor out for rebuilt 5.9 Magnum and saved the cam out of the old LA 360. Maybe 300 street miles on it. Real nice shape. No lifters...

Looking for a nice black wheel, doesn't have to be perfect but a nice driver quality wheel not all full of cracks would be nice! It's for s '70 but I'd be ok with 70-72 probably! Thanks, PM me peeps!

These are for sale near me and I'm kinda liking them, anyone put them in an A-body? Chime in! Of course I'd clean em up and dye em black etc etc. the vertical stitching matches my rear seat and they are power + heated. Not that that is a real big deal to me

Selling my MP black valve covers off my 360. Putting a Magnum in my Duster so these are up for sale. Nice shape, clean and baffles in place. These have already been notched for Edelbrock intake runners so they seal up real nicely! Also come with oil filler cap and chrome Mopar push in...

Hey guys and gals, since re-wiring the Duster I salvaged all the good stuff off the old harness. Figure I'd see if anyone needs any of these for spares or to replace a bad one etc... Some individual pics below, sorry for multiple pic posts but couldn't get em all in my orig post with the...

So now that I have a 6-pack hood, wanting this style decal but with "360 4bbl" instead. I know I've seen variations before online but can't find any now? Anyone know if/where you can get different variations if this decal?

There is a set of 90's Stealth seats and a nice set of 300M leather seats for sale by me that look like they would be nice in the Duster. Anyone ever out something like these in? Thanks! Just looking for any feedback!

Got a pair of 165r fronts. Nice shape, no road abuse. These were on a mild Mustang track car. Real good tread! No gouges,scraps or curb rash. These are not the 900lb rated versions, these are the 1200lb versions! Just FYI, some guys worry about the load rating on the 900's $80 for the pair +...

Just bought these off a member here for my Duster but my buddy has decided to sell his set of Weld Draglites so I'm changing directions. These are 15x4" steelies custom made by "The Mopar Dude". They are large bolt pattern 4.5" and they have 2.5" backspacing. Real nice shape, no dents/dings...

This is an original '70 Plymouth service manual in exceptional shape for it's age. Cover/spine/all pages in tact. No rips/tears, missing pages etc. No stains etc. Minor yellowing due to age etc but overall very nice shape. $65 shipped...heck the dumb repop's are $65 on ebay. Own an original...

These are vintage flags from our local dirt track (Kalamazoo Speedway). Good shape, no rips/frayed edges but do have some dirt/smudges on them from being used. They are 3'x3' square on a 4ft wooden dowel. Regulation size! The blue is a spot on match to that lighter Mopar blue! Cool for the...

Have had this for quite a few years. It's a vintage Swingster brand Valvoline racing jacket. Size is XL. Not perfect, some yellowing around the collar etc but I'll call it "Patina" ok? No rips/tears etc, it's old school cool...yea not Mopar specific but still cool to wear to the cruise in/car...

This is a newer (not vintage) DC jacket size Large (see pics). Nice jacket, worn a couple times. Again, this is a reproduction of the original DC jacket, looks just like the originals (there is one original on Ebay for $250). Been hanging in the closet for 5 years. Hard to find, I Googled it and...

Selling the seats I've had in my Duster. Going lightweight aftermarket in the spring. Nice shape, no rips/cracks or bad seams etc. Tracks in good shape, could use a paint job I suppose but move freely and work fine. Foam good etc. These are not restored show quality seats, but rather nice driver...

These are all size Large! All like new barely worn (we're too small for me). Aside from the 94 Nats shirt which is not new but in good shape $30 for all 4 shipped! Would prefer to sell as a lot of 4! If for some reason they don't sell as a lot I'll break them up but for $30 how can ya go...

Pair of Chrysler original scoops in nice shape. Missing a few retaining nuts and studs but no cracks/damage on these. Some scuffing etc on the edges but no breaks. Could use a respray to be show quality, or use as is on a cruiser. Bezels are nice repops from BE&A parts. They alone are $135 new...

Selling the FBO ignition off my Duster. Two seasons on it, no issues at all. ECU is a USA made unit, not one of the Chinese ones! Everything in real nice shape overall. Bolt on and go! Nice upgrade over the MP orange box stuff that would take 2 min with one arm tied behind your back...and yes...

Selling my 1st Gen DC valve covers with the breather, cap and spare set of grommets as shown. These do not have the flat ends like the 2nd Gen covers or the wire looms like the Lil Red Express versions.These were on my 360 in my Duster, didn't leak with cork gaskets. No damage, dents etc but...

This has been on my Duster for 2yrs. I'm switching things up this winter so it's up for sale. What you get: - 14" K&N X-Stream lid - 14" x 2.5" K&N tall filter - chrome drop base with custom breather tube welded on These parts are used but in nice shape. The lid and filter could use a clean...

Well had this carb on the 360 in my Duster for the summer but I'm gonna blow up my combo this winter, pull my heads and up the ante on my motor and go with a mech secondary Holley Street HP I believe....so this is for sale to help fund the project. It's a Quick Fuel 750vs "Slayer" and Summit...

Selling my rims off the Duster. Set of 2 yr old Summit brand Warrior R/T's. They are LBP 4.5". 2 - 15x4.5" w/ 1.75" back spacing 2 - 15x8" w/ 4.5" backspace 4 - center caps (no lugs) Nice shape, no damage or dents. General scuffs here/there from being on my car for a couple years but overall...

Had this lying around and not gonna use it. Not the prettiest pig at the trough but it works fine and the lens is clear and not cracked. See the dent in the outer ring in the pic. Was in a drag boat for a long time that saw minimal use. So it was used far less than it it looks like! But...

Used Auto Meter triple gauge pod for underdash and swivel cups so you can rotate your gauges out/up toward the driver etc... $20 shipped. PM me!

Bought this awhile back from Rick at FireCore 50 when he stumbled upon some stock of these caps. Paid $50 plus tax/shipping. Sell for $50 shipped. Had my fun with it, could use the $ for other parts I need. Very nice shape, NO yellowing, no cracks. This is a nice vintage one Made in...

Auto Meter Sport Comp Tach. Retails for $145 at Summit. This came off a running car recently. Was going to use it on my Duster but going a different route. Nice shape functions fine. Wires were cut but there's 4-5" to splice into no problem. $75 shipped? Heck I'll throw the stickers in...

Ok, here we go. Please help me decide between these carbs listed below. Please refrain from offering any other models/types if you can. I'd like to stick to this list below! Background: Sold my 625cfm Street Demon which was a GREAT carb. Ran great on my stock low compression late 70's truck...