Search results for query: *

So luckily for me, I accidently scored an 8 3/4 rearend, but found out it is a 67 b-body rearend with 11in backing plates and 2:94 surerip to boot. I decided when the time comes, I'll probably swap this rear into my duster. I was thinking that instead of swapping out the diff assembly, I could...

Will Sanderson shorty headers for 340 1970 dart swinger with power steering? Friend found a set cheaper than manifolds was was thinking of putting them on her car. Not race car, street car cruiser.

Looking to put an overdrive auto into a 73’ Duster and maybe another car. I’m looking for a company that sells everything so I don’t have to do any parts hunting. I know I will have to shorten the driveshaft, but that can be farmed out locally. I don’t want a gear vendor unit. If I’m going to...

Have a used 1970 spoiler With the solid pedestals. Could use a respray. Good for a driver. Will fit other years. $140 plus shipping costs or you can pick up in San Jose, CA.

So I’m still getting parts for my Fugly Duckling 73’ Duster build and decided on some cheaply shorty headers for easier install and easier side dump for some cut out. Looks for something that clears power steering box and does not require me being a contortionist to change apart plugs. Small...

For those that didn’t know, many, many moons ago,there was a company call Rocky Mountain Dashes. They made some interesting dashes for an assortment of only Mopar cars. Even though the prices were a little high, they were unique and made the boring dashes of custom and race cars look great...

So I'm sourcing parts for when the car is going to get stuff thrown at it. I know the 904 is bone stock and instead of trying to upgrade it, was looking to have a beefy 727 slapped in. besides the driveshaft, what parts will need to be swapped/modified to make it work? I do plan to swap from...

So I was planning to put a 440 in my 73’ Duster and decided to sell off all my small block stuff and did so over the weekend. At the same time, I was offered a deal on a torquestorm supercharger for a small block and think it might be a fun little combo for the duster instead of the RB engine...

A nice used weiand b-engine intake manifold. Great for street cars needing some torque and nearly stock height food hood clearance. $150 in San Jose, CA. You can pay for shipping with PayPal friends and family if you can’t pick up locally.

1968-69 pass side seat tracks in good condition. $40 local pick up in San Jose, CA. shipping extra. PayPal friends and family.

not my car, but I know the guy. He’s pretty cool and delt with him over the years. Here is a link to his ad. 1968 Plymouth Barracuda for sale by owner - Santa Rosa, CA - craigslist

Nice original 340 exhaust manifold stored indoors for many years. No cracks or repairs. $450 plus shipping via PayPal friend family or post office money order.

A Very, very nice matched set of 340 hp exhaust manifolds that have been stored in a garage since 1996. Has not be restored, no cracks has a June casting date and is correct for early 1970 production cars. Only thing is the heat flap was removed and a bolt was used to seat the hole, but can be...

1968 dart bumper. Good core as straight and chrome peeling off. Has bumper brackets and licence plate light. $75 and delivery to the Fall Fling, CA this Saturday the 21st.

Very nice Fuelabs hi volum feul pump and regulator off of a very low mile show car. This supplied a 900hp big block engine and mostly seen very little use. In excellent condition. Retails for $840 for the pair, selling for $399 shipped. PayPal friends and family or local pickup in San Jose, CA...

One thing I loved about my 1970 Cuda and 1971-1972 Chargers is that I could pull up to any gas pump and fill my mopars with not having to deal with waiting for the right side pumps to be unoccupied. Since my 73’ Duster is needing a trunk pan from the spare tire being rotted out, i was thinking...

So my 73’ duster just happens to sport the big bolt pattern 8.25 rearend. Now I plan to upgrade the engine to most likely a big block with a torque factor of ‘ridiculous’. These are not 8 3/4-Dana 50 rears, so I’m sure their power-to-survival rate is much lower. So my question is, how much power...

Very nice early a-body 4speed hump. Looks ok, shift plate not included. $240 shipped. PayPal’s friends and family or cash local pick up.

Nice driver quality shifter plate for a-body cars from 1963-1966 models. $280 shipped. Hump not included. PayPal friend and family. Shipping mondays and tuesdays only.

Bucket seat cores, could use foam as it is dry and crumbling. $199. Shipping extra. Can drop off at local Mopar shows. Located in San Jose, CA. PayPal friends and family cash or us post office money order.

Not sure if has been posted here, but a U.S. company is making turbo headers for gen III hemi and 383-440 big block mopars. They are making front exit manifolds to boot. For people that can’t fabricate (like myself) this might be a good starting point. They even have kits to build any set for...

I am contemplating on buying a hemi and having a shop do the swap. I am trying to gauge what everything (minus the engine) to do the swap into a older mopar A-B-E-body car (I have a few to chose from since I didn't sell my entire collection off last month). Would love to see the price break down...

Not mine, but I do know the owner selling it and would offer to take pics if needed. 1967 Dart Big Block ready - cars & trucks - by owner - vehicle...

My rare find of the year. A real NOS nascar/circle track X block that has been sitting at a shop 1981. Predates to the famous ‘R’ block and much stronger. Never ran, sat shelved and is a virgin casting. Heavy duty does not describe this piece. Weights as much as a big block from all the heavy...

Have changed my mind on using these nos caps on my cars restoration. Four pristine caps ready for your perfect ride. $399 shipped or delivered to the Mopar Alley Rallye car show June 10th at DeAnza College in Cupertino, CA. If you want them shipped, I take PayPal friends and family as payment.

So now that I'm an A-body owner again, I wanted something weird/cool to match my tastes and have for awhile thought about using the Hi-Ram intake from Holley to mount on a G3H to push it through a hood. I'm not sure if it high enough to push through, but I would love to have it stick up as high...

Free delivery to Mopar Alley Rallye car show June 10th at DeAnza College in Cupertino, CA. Small block cast iron bellhousing. Looks nice and does not look to have any cracks. $199 Milidon pan with stock pickup. Pan is for 360 engines and won’t work with 318/340. has been on a motor for years...

1973 Plymouth Duster. Ran when parked, out of the system last 19 years. 318, auto, power steering, power disc brakes, air conditioning, bench seat, big bolt pattern 8 1/4 rearend, crager wheels, 3spd wiper, fold down rear seat. Straight body, good race car project or driver. Needs gas tank and...

here at a buddies place and was looking at his yard of cars and was thinking that maybe one year(s) of a-bodies allows better installation of the B-RB engines than other models. I was thinking the 1973+ was the best year, but he insisted the 1967-69 were not problem if you went with manual...

Located in San Jose CA. I accept PayPal friends and family or us post office money orders. Edelbrock Performer small block intake manifold $199. Holley street Dominator intake manifold B engine 383/400 $225 Edelbrock Performer 440 intake manifold $210. Shipping and boxing is not included in...