Search results for query: *

Just bought a 1969 tube chassis Barracuda drag car and I'd like to come up with a name and maybe a graphic theme for the whole car or maybe just the doors. The all red is nice but I just love the look of the Sox and Martin Barracuda and the Kandy Cuda etc. I've been racking my brain for a couple...

It was kind of fun doing my last what will it make thread so I thought I'd do another one for my 410 stroker motor. -Scat balanced Forged Rotating assembly with dish +20.5 pistons -Edelbrock Performer RPM heads (originally 65cc but now 55cc if memory serves me correctly) that were milled to up...

Looking to sell my low back bucket seats from my 68 Dart. Evidently they are a 67 style seat but will fit a 67 to 72 Dart and possibly other years as well. Seats and foam are in great shape. The covers are in good shape but the drivers seat has some cracking on the bottom vinyl where you sit...

I bought the plug and play Cracked back headlight relay kit for my 68 Dart but it's turning into more of a drag car then a street car so I am not going to bother installing the headlight relay kit. It's brand new in the box, was just opened to look at it when it arrived. Also includes the...

I'm about 99% sure that I'm going to have my 68 Dart painted to be a Dick Landy tribute car when I get it repainted. Wondering if anyone knows the actual paint codes that they used? Thanks!

I'm at a crossroads with my upgrade path for my 408 stroker. I can take my Edelbrock Performer RPM heads and have them ported, new valve springs, rockers, and a new set of headers (currently have some junk Hedman 1 5/8). Or I can get a set of W2 Diamond Aluminum heads rectangular port that...

Need to get a new clutch (and pressure plate) for my 68 Dart and I'm hoping for some opinions from what others have run. It's a street/strip car so I put about 2k miles on the street and figure 8-10 sessions at the track. Specs: 408 stroker (500 hp/540 tq) From 3500 to 5800 it's making 450+...

I've been trying to do some research on who does the best porting work (I'm talking about shops or vendors or individuals that offer it as a service). Thought it might be nice to have a compilation of people's experiences with various porting companies and vendors. Please chime in with as much...

70-72 Plymouth Duster Door Emblems. All mounting posts in back intact- $40 Heater/Fan Control with cables A body- $80 Rearview Mirror A Body: $35 A Body AC Vents – no broken vent tabs: $25 Heater Dash Bezel- All studs intact: $10 Set of seatbelts that were in my 68 Dart (bucket seat...

1969 Dodge Dart turn Signal assemblies $45 67-72+? (off my 68 Dart when I got it) Remote mirror, chrome decent w/a few small pits. Glass good: $50 70+ Dart Body End Caps. All studs appear intact. $20 each Prices do Not include shipping . Payment via Paypal F&F. Local pickup is available...

2 groove crank pulley, media blasted and painted black p# 3614378. Was on a small block w/power steering $40 18 inch 5 blade fan ( was on a smallblock Mopar) $18 SOLD Small Yolk 7260 for 8 ¾ (489 case) $35 67-69 A Body Transmission Crossmember- media blasted and painted. Includes trans...

Hey everyone, I'm about to swap gears in my 68 Dart from 3.55 to either 3.91 or 4.10. I'm trying to decide which I should go with. This is going to be a 50/50 street/track car with minimal highway driving so I'm not concerned about my highway cruising rpm. Engine is a 408 stroker Tires are...

Looking to buy a rust free roof skin for a 67-69 Dart. I believe the 70-72 Darts would also work? If by chance you have one and are going to Mopars in the Park I would be willing to send you a deposit via paypal and then pay the remainder in cash or all in cash at the show if you don't require...

I'm not super familiar with Hemi parts but I'm looking at building my 68 Dart into a SS clone so I am starting to piece together some Hemi parts. I've got a line on a set of brand new Mopar Performance Stage V aluminum Hemi heads (not the conversion ones. They've been ported and include...

Hey everyone, Looking for a few specific Super Stock Dart parts for my 68 and what suppliers/companies have the best pieces to get these parts from. First on the list is the seat belts straps and hardware for the pull up windows. Where/who is the best place to get all these parts from? I'm...

I've got Moroso solid motor mounts on my 408 as well as a polyurethane transmission mount. For some reason the driver side motor mount keeps coming out of the hole in the engine bracket (that is bolted to the engine itself) and allowing the engine to shift back on the driverside a half inch of...

Currently I've got a single groove 6 1/4 wide 1 1/2 inch deep Crank Pulley. The water pump one is slightly larger at about 6 1/2 inches and 2 1/4 inches deep roughly. My water pump is being under driven which has not been great for my cooling system even though I'm running a Flowkooler water...

Converted my 68 Dart from power steering to manual steering when I did my motor swap. Pump was rebuilt and everything worked well when removed. Nice and tight steering (for an old car). Part number on sector: G2267262 which shows from a 1970 B & E body from what I could find but it fit on my A...

Well I goofed and ordered a stock length driveshaft but it ended up being too short because I had to move my axle back an inch and an 1/8 to clear my bigger tires. So I've got a basically brand new Victory Chromoly 3 inch driveshaft w/1350 Spicer solid u-joints. Exact dimensions are 51.60...

I've decided that I think I want to swap out my 3.55 gears in my 68 Dart 408 stroker. It's a 4 speed manual with the 2.44 (I believe that's what it was?) 1st gear. After this last tuning session its making roughly 500 hp and 540 ft/lbs torque. I'm running a 28x12.5-15 Bias ply wrinkle wall tire...

Headed to the Mopar Nationals August 10-12th and I'll have my truck and trailer with some room so I'm willing to haul parts that I've got if anyone wants to pick them up at the show. Free delivery to the Nationals or buyer to pay actual shipping. -Victory Chomoly Driveshaft 51.6 inches long...

Hey all, I'm looking to have customer stickers made for my superstock hood scoop on my Dart that would say "408 Stroker" just like the 69 1/2 Super Bee "six pack" hood scoops had. Anyone have an idea what the font was called that they used? Picture attached for reference of what style I'm...

Well I goofed and ordered a stock length driveshaft but it ended up being too short because I had to move my axle back an inch and an 1/8 to clear my bigger tires. So I've got a basically brand new Victory Chromoly 3 inch driveshaft w/1350 Spicer solid u-joints. Exact dimensions are 51.60...

Looking to sell my low back bucket seats from my 68 Dart. Evidently they are a 67 style seat but will fit a 67 to 72 Dart Seats and foam are in great shape. The covers are in good shape but the drivers seat has a stitch that has come out. It's about 5 inches long. The vinyl didn't tear at all...

Just finishing installing my superstock hood scoop and I'm about to add the stantions. Wondering how far from the leading edge of the scoop they should be?

Here's a quick video of my 68 Dart 408 w/Hooker Aerochamber mufflers. Doesn't seem like many people know about or use these mufflers but my dad and I both use them and love them. Exhaust consists of headers, 3 inch pipes (no crossover), and 3 inch Hooker Aerochambers w/turndowns at the axle...

Just for fun I'd like to see what people think my 68 Dart will run in the 1/4 mile? Also this will be my first time running the car and setup. My only other drag race experience is with AWD twin turbo Stealths and 3000GT VR4's. My setup: 1968 Dodge Dart 4 speed manual- 23 spline 408 Stroker...

Well I finally got my Dart up and running with a brand new 408 that I had dyno'd. I got it aligned and took it for a shakedown run and I've discovered that I have a surging issue while cruising. In fact any time I try to maintain a steady rpm (ex. if I push the clutch in and try to hold the rpm...

Like the title says I'm looking for the big bolt pattern brakes (backing plates and drums etc) so I can convert my small bolt pattern A Body 8 3/4 to the big bolt pattern. I'm planning on purchasing a set of Moser axles and I've read that I need to upgrade to B Body backing plates and 10x 2.5...

Hey everyone, I've got a 1968 Dodge Dart that had the wiring harness previously modified to run a mopar electronic ignition. I am wiring in an MSD 6AL2 so I'd like to remove any unnecessary wiring from the modified harness. I've also swapped the automatic transmission for a manual. I noticed...