Search results for query: *

  1. Michael Brisebois

    67 "K" member

    Question for Y'all Can you drop a 318 into a car with a slant, without changing the "K" member" Thanks
  2. Michael Brisebois

    Looking for 225 power steering pump help

    I got a new project: a 1962 Dodge D100 pickup. There were soo few made with power steering, that the original equipment can't be found. I bought a kit from "Easy Street" and with a lot of fuss, i got the knuckle into a spot, that it might actually work. The pump that was supplied, cannot. I...
  3. Michael Brisebois

    [WANTED] 225 Slant PS bracket needed

    My new project Mopar is a 62 D100 pickup. It takes the "Hulk" to turn this wheel, though....and almost none of these came with power steering... I've looked hard to find one, with no luck. I bought a kit online and started a conversion, so when I die....one of my kids will want this truck...
  4. Michael Brisebois

    [WANTED] WTB 225 Slant PS bracket Saginaw style

    My new project Mopar is a 62 D100 pickup. It takes the "Hulk" to turn this wheel, though....and almost none of these came with power steering... I've looked hard to find one, with no luck. I bought a kit online and started a conversion, so when I die....one of my kids will want this truck...
  5. Michael Brisebois

    Dodge D100 Tail Light Wiring

    I know I'm mixing apples and peaches here, but you guys have always helped out with whatever Mopar question/need that I've had. I'm back onto my 62 Dodge D100 project. I'm looking to see if anyone makes the wiring for these tail lights. In particular ,I'm looking for: the two leads with the...
  6. Michael Brisebois

    D100 Pickup question for you:

    I recently bought a 62 D100 from an old rancher in Montana and trying to do it justice. This is my 3rd Mopar project and since there's no "fordbodiesonly.com" ( I don't seem to get much from fortrucksonly.com), I'm hoping for an opinion regarding my drivetrain from the place that has helped me...
  7. Michael Brisebois

    Fuel tank replacements

    I know that I'm not in the "correct" spot for this post, but... For my latest Dodge project: I'm looking for a new fuel tank for my "62" Dodge D100 pickup. I believe 61-65...maybe even all the way up to 69, would fit. The existing tank is rusty, maybe too rusty to save, certainly too rusty to...
  8. Michael Brisebois

    To Joey

    You probably are aware, but FBBO website is down Thank you Michael
  9. Michael Brisebois

    Starter goes "KLUNK"

    I'm having an issue with my 66 Barracuda starting. 273ci I was certain that it was the starter, as it would only go Klunk, so I replace that miserable thing. I replaced it with the "high torque" mini starter as the size makes it an easier job ( not by much though). I had concerns, as the top...
  10. Michael Brisebois

    Mopars: By Year, By Option Package, By Color, By Originality, by Customs

    I've had many Mopar's over my life A, B and C bodies, but I can't really say that I fully remember any, other than the ones I still have....I'm not positive that I even have those right. I've often found myself surfing the net to see a glimpse of how "the car" looked, when it rolled off the...
  11. Michael Brisebois

    What a miserable job

    I know that there are worse jobs than replacing a starter in an early Barracuda, but it sucks. That top bolt is such a bother to reach and remove. Perhaps someone has a better way, but I did come up with a slight improvement, Not exactly perfect, but it did make the top bolt easier. Does...
  12. Michael Brisebois

    66 BARRACUDA GAUGE CLUSTER, PAINT/CHROME

    It's spring and my Barracuda is back from storage. Over the winter, I located another gauge cluster, in solid condition, but like my original...the chrome is non-existent. I've never seen one in good original "true" colors. I believe that the perimeter is chrome, the field is silver and a black...
  13. Michael Brisebois

    Led Lights

    LED lights have been out for a while. I've heard that some are too large and warp lenses with high temps. I want to switch out every bulb in my 66 Barracuda, as OEM's are just not bright enough. Anyone that has one of these knows that many of these pieces, will be work to replace. Can someone...
  14. Michael Brisebois

    Carlisle

    Anyone want to meet up for a face-to face (or mask-to-mask) this year? I'm at the Roadway this year
  15. Michael Brisebois

    Carlisle coming... or is it?

    I'm concerned about the event. I'm seeing a notice that the info on this event "may be out of date", online. I got a 6 hour drive. I expect that the show will be smaller....just hoping it's on Does anyone have anything definitive?
  16. Michael Brisebois

    MOLOTOW test

    I've all but given up on the chromed dash pieces on my 66 Barracuda. All the "rattle can" solutions disappoint...what I know for sure is: they didn't use their product to cover the plastic cap. My plastic, with the chrome worn out, looked yellow-ish. I happened to see a "new" product, well...
  17. Michael Brisebois

    [WANTED] 66 Barracuda licence plate light. A pic would help

    I sent the bumpers out for re-chrome and I lost the plate light. I have a wrong light in it now, just to have something. I know that a Dart is close, but not quite right. A Pic ( with a couple dimensions) would be a big help
  18. Michael Brisebois

    66 Barracuda Licence plate light

    I sent my bumpers out for new chrome and lost my plate light. Can anyone send a pic of what exactly I'm looking for Thanks Michael
  19. Michael Brisebois

    Virus Project

    I'm trying to make something possitive out of the "quarantine". My 66 Barracuda is getting a 4bbl. I've been getting the necessities for nearly two years, and so it's time. Got some projects for the Coronet, that are just about ready to go also. Anyone else have a COVID project getting pushed...
  20. Michael Brisebois

    273 Edelbrock upgrade for my 66 Barracuda, throttle cable issue

    I'm replacing the original 2 bbl carb on my 66 Barracuda, with a Street performer and a 1403 carb. The manifold has a spot for everything, but the original throttle cable bracket. Any ideas ? Perhaps someone has a cleaver way to use what I have, a throttle cable bracket to sell, or a...
  21. Michael Brisebois

    [WANTED] Dome top Ball Joint Bolts

    Looking to see if anyone has a pair of 7/16"-20 dome top lower ball joint bolts for my 66 Barracuda with the Kelsey Hays disk's. I can buy socket head cap screws, but would rather have OEM
  22. Michael Brisebois

    Rattle-can "chrome"

    Ever notice that the plastic cap on the "so called" spray chrome, looks great......but it seems to be impossible to get that affect on your plastic parts....NOT EVEN CLOSE! Has anyone found a possitive result? Perhaps there's a brand or process.
  23. Michael Brisebois

    Chrysler at Carlisle. What's the best and worst for you?

    July 10th-12th this year. I love the Mopar's in chronological order. Gotta look for cars like like mine and see how it's "suppose to be". I;m troubled by the "burn-out" contest. If my Barracuda ever makes the ride down there...it will not be participating. Anyone planning to be there? It...
  24. Michael Brisebois

    Will you let in foreigners?

    Can they be allowed in through marriage? Not people. I was at the Syracuse car show 3 weeks ago and took a pic of a Nash Metropolitan. I sent the pics to my wife and she fell in love with it. Technically a British car, but hold on there: Nash, an American brand, had the car produced in...
  25. Michael Brisebois

    73 Duster disk brake conversion

    The title may be a bit misleading. I have a 66 Coronet that I've converted the front brakes to a 73 Duster disk setup. It works, but I question weather I've done it correctly and humbly ask for clarification. Everything I have, has come to me in pieces so I've never seen it all together. I...
  26. Michael Brisebois

    Dam Dust covers

    I'm still working on the Kelsey Hayes conversion for my 66 Barracuda. The spindles are from an early Duster. I can't seem to find the wheel bearing dust caps in a size that fits. Too big, too small, when I measure the beat up originals, it appears to be 1.780" dia. . I found 1.813"...
  27. Michael Brisebois

    [WANTED] 71 Duster Caliper mounting bolts

    I'm rebuilding a set of Kelsey Hayes brakes that will go on my 66 Barracuda. Two of the caliper mounting bolts came out real hard and the heads got a little mangles. Does anyone have two to sell...or know where I can buy a new set?
  28. Michael Brisebois

    [WANTED] 66 Turn signal switch

    I need a recommendation for a turn signal switch for my 66 Barracuda...the whole thing, unless those little bastard ends can be purchased. It's been a comedy of errors on my part, but I ruined the switch I had, and another that I stripped out of an old steering column. After fishing the wires...
  29. Michael Brisebois

    66 Turn signal switch

    I need a recommendation for a turn signal switch for my 66 Barracuda...the whole thing, unless those little bastard ends can be purchased. It's been a comedy of errors on my part, but I ruined the switch I had, and another that I stripped out of an old steering column. After fishing the wires...
  30. Michael Brisebois

    What to do about OLD CHROME

    My 66 Barracuda gauge cluster has no luster. I have 3 clusters and the common trait is that there is no chrome left on anything. I don't even know what it's suppose to look like, but I'm assuming that it isn't suppose to be that old base plastic. Aside from dropping a small fortune into a...
Back
Top