Search results for query: *

I've got a 69 Dart Swinger 340 that I pulled the harnesses and rebuilt them with new parts where needed. I also eliminated the ammeter and bulkhead connector. I connected the ammeter connections and used posilock connectors to replace the bulkhead connector. Anyway, everything seems to work fine...

Just a heads-up that I had a catastrophic failure on two of these. One I purchased and the second was a replacement for the first. This is for PN MA8174 which is a non-vented cap. This cap is held together with a single spot weld. When that fails it pops the inner cap with the latching ears...

Heading says it all. I purchased this and went with 3/8 instead. Still has the tags on it.

As the title says. HELP! PM me.

New amber front side markers from Layson's. Have an extra set available for $20 plus shipping. Message me if you're interested. York, PA. Thanks for looking, Jeff

I've got a set of Supersoft door seals new unpacked only to realize I mistakenly had another set. My mistake your opportunity. $60 plus shipped in lower 48. Message me if interested. York, PA Thanks for looking, Jeff

I found I have a 67 door on my 69 Swinger and it's really scratched up and needs replaced. Can I use a 69 window in that regulator? What needs changed if anything?

Looking for nice used glass. Doesn't need to be perfect, but not all scratched up. PM me if you have something. Thanks, Jeff

As mentioned in the header this is a brand new headliner that I ended up with from Classic Industries. Its a long story but I have to do a shout out for their customer service! Anyway, $100 + shipping OBO. I'm in York, PA area 17322. Let me know if you have any questions. Thanks in advance for...

I have a complete bezel set from my Dart for sale. Chrome trim is gone and have been painted some time in the past but in reasonable shape to use with TLC. See photos below. I'm asking $25 for the set. I can deliver to Carlisle. I will not ship due to expense. I'm located just south of York, PA.

I've got what I believe is the original radiator from my 4 speed dart. Caps are in good shape, but it's going to need re-cored. I'm asking $50. See photos below. I can deliver to Carlisle. I will not ship due to expense. I'm located just south of York, PA.

I've got a set of rusty but solid headers of an unknown manufacturer for sale. Flanges are straight. You'll notice in the photos that I had welded in a relief dimple for clearance of steering linkage, but never installed them afterwards due to a changed direction in my project. These would be...

I've got a stock 15" steering wheel for sale. In decent shape with no open cracks in it but does have a few small nicks - see photos. There are some rough edges on the front edge of the center section that you may not be able to see when the horn cap is installed. The wheel includes the stock...

I have a full set of 6" wide 3 3/4" offset wheels with stainless rings and center caps for sale. Rings need cleaned up but are in decent shape. One of the center caps has a crack in it. All have the fastening bolts with them. See photos below. I'm asking $250 for the full set. I can deliver to...

This panel came off of a 69 Swinger I bought that was dressed with GTS trim items. It had damage that would not allow it to be re-anodized (a couple of deep scratches and dents - not bad but not worth the investment). I skim coated those areas and primed and painted it three times but was not...

I've got a set a bumpers in decent shape. Chrome is not the best but no rust or pitting to speak of. Fairly straight but not perfect. Would be decent driver or good candidates for re-chroming or painting. Asking $50 each. Can deliver to Carlisle. Not interested in shipping due to expense...

I'm looking for some insight here... I just replaced my whole system. I went with a standard Cardone master, early 70s factory disc / drum distribution and proportioning block, and no name roll control. After chasing a bunch of leaks around I have everything tight, but the system will not pump...

I'm working through a problem with a custom traction control system I'm putting together and can't seem to find urethane eye bushings in the right sizes. Here's I what I'm doing... I moved my leaf springs in against my frame rails for some added tire clearances. I did this by modifying the front...

I've got what is probably a factory 340 carb. This came with a car that I purchased. Looks to be completely intact. Asking $100 + shipping from York, PA. PM me with any questions. Thanks, Jeff

I've got a pair of heads that came off of a running motor I acquired. One is a J head and one is an X head, have large intake valves, look to have some porting work and both have stock rockers and shafts. These heads came off of the short block that I've got listed. Motor ran really well and...

I acquired from a running 340. Dist comes with cap and rotor Asking $75 for the pair + shipping from York, PA. PM with questions. Thanks, Jeff

Here's the back ground info. This motor was in a barn find car that I was able to drive home. The previous owner had the car for 20 years and would drive the car occasionally to keep it in running condition. I drove the car home when I bought it. The motor was quiet, didn't smoke and ran very...

OK, so a week or so ago, I opened up the 340 out of my car and found this. The good thing is I've got the numbers matching motor that has a spun big end bearing. I wasn't planning for this so I'm on a budget. I'm not planning any strip time, and just want a healthy street car that's torquey...

Hey guys. I pulled down a 340 out of a Dart I'm going through and found this epoxy like stuff on the inner block under the intake. Can someone speculate what it's there for? Thanks in advance, Jeff

I have an BBP rear that is smooth, quiet, and has very little backlash. So here's my question - I'm in the process of going through my 69 Dart 340 4 speed Swinger and would appreciate thoughts on how I can determine whether or not I should do anything to it while it's out of the car. Should I...

These came off a 69 Swinger I'm going over. 70's LBP / large ball joint parts. Splash shields are in OK condition - one has some cracks between holes. Ball joints were tight - one has grease zerk broken off but could be repaired. UCA's have newer bushings. I also have lower ball joints, tie rod...

Title says it all. Thanks Jeff

Hi All - Can anyone tell me what you call the foam gasket that seals between the front brake rotor splash shield and the spindle And where I can buy them? Any help would be appreciated. Thanks! Jeff

Can anyone tell me what I've got?

Hi all. New here and I'm going through my 69 Dart that I just picked up. Need to replace the radiator and would like to hear everyone's suggestions. Not concerned with popular brand names just looking for quality and good value. I've got a fair amount of things I'd like to do and don't want to...