Search results for query: *

  1. JeepGuy

    Rad help with 67 dart .

    I think I'm burning myself out looking for a radiator for my 67 dart, originally a 225 ,will be 440. I'm reading so much it's making my head spin. Champion lists a 2 core that's 22" and they show a 26" , I dont mind cutting some if it works better,they dont show a 3 core, do I need a 3 core? Do...
  2. JeepGuy

    69 Dart Rear End Swap - Looking at Ford 8.8

    the explorer rear is a little better than the ranger, it has 31 spline axles and disc brakes. ive used the 8.8 in jeeps for years, make sure you weld the tubes to the center section, thats one of the weak spots. also if you got a limited slip one ford racing has a cheap carbon clutch pack thats...
  3. JeepGuy

    First time engine assembly

    Huh lol
  4. JeepGuy

    First time engine assembly

    I got my 440 back from machine shop mostly assembled but I still need to put water pump housing, timing cover,valley pan, intake, oil pickup and pan and valve covers on the new engine, I've never put one together before, where can I find accurate torque sequence and numbers for everything and...
  5. JeepGuy

    "Kickdown" rod for 727 BB

    My setup is out of a 68 new yorker ,engine was date coded 67. I'm guessing less problems hitting stuff with the cable setup?
  6. JeepGuy

    "Kickdown" rod for 727 BB

    I'm not actually sure what its called but I'm trying to find the rod that goes from carb to trans that controls shifts, I only have the part that goes directly on trans and the lever that mounts to trans. Is there a aftermarket supplier for them ? What is the correct name so I can look for one?
  7. JeepGuy

    Engine Install Question

    my alingment is all jacked up anyway. no exhaust in car, schumacher headers
  8. JeepGuy

    Engine Install Question

    Was just gonna ask this same question, hopefully my 440 will be back from machine shop soon. let me ask , if my k member is still in car is it still easier to take it out and go from the bottom?
  9. JeepGuy

    [FOR SALE] garage sale

    inerested in harmonic balancer, how old is it?
  10. JeepGuy

    Fuel pump block off plate?

    Is there any members that make a fuel pump block off plate ? I'd rather give money to a member than a corporate store
  11. JeepGuy

    Needs some wisdom thrown my way.

    Are the ones 440 source sells any good? I think I'm over thinking this for a relatively stock build
  12. JeepGuy

    Needs some wisdom thrown my way.

    My 440 is at machine shop, I need to order pistons , the stock rods are all ok but if I'm better off changing them also I will. Crank needed turned down 10 under. Block was bored 30 over , I've never had a motor rebuilt before so I have no idea what I'm looking for. I'm not looking for huge...
  13. JeepGuy

    New guy from PA

    wow lots of pa guys here
  14. JeepGuy

    New guy from PA

    its a AAR brand hood
  15. JeepGuy

    New guy from PA

    no so much make it fit, I have Schumacher mounts and headers lined for it, more of what to do to engine on a budget
  16. JeepGuy

    Gaskets and bearing selection???

    Are there any brands/materials to stay away from when looking for a rebuild kit/parts for my 440? the guy that will be putting the motor together says he can give me suggestions but he mainly puts together race cart (dirt) motors and I'm kinda looking for more than a couple races worth of life...
  17. JeepGuy

    Cam upgrade?

    what else was done to motor ?
  18. JeepGuy

    Cam upgrade?

    That's what I'm looking for, a little extra but a good driver, I'm not racing the car but if my kids demand a wicked donut in the school parking lot when I'm picking them up then id like to be able to mash that pedal amd make it happen
  19. JeepGuy

    Cam upgrade?

    I would prob do a intake also, what do you guys suggest. keep in mind I may run a fuel injection conversion, but just one of the cheap ones from fi tech or summit (think its the same as fi tech) I don't want to get into new rotating assembly and things like that unless when its apart its bad...
  20. JeepGuy

    Cam upgrade?

    looking for some help picking a cam out for a 68 440 going into my 67 dart, don't plan on big upgrades, just a refresh before it goes in the car, is something like this COMP Cams Xtreme Energy Cam and Lifter Kits K21-224-4 a good choice or am I wasting money by buying it all together? will have...
  21. JeepGuy

    New guy from PA

    that's the plan, get the 440 together (although that alone is looking tough not really knowing what I looking for) and get the bugs worked out then do body stuff next winter
  22. JeepGuy

    New guy from PA

    Has a few things done to it buy a previous owner, front ssbc disc brakes, subframe connectors, spring boxes and some kind of aftermarket springs.
  23. JeepGuy

    New guy from PA

  24. JeepGuy

    New guy from PA

    New to classic mopars , just picked up a 67 dart, had some previous work started , I plan to finish it. Looking to learn as much as I can. car currently has ssbc front disc conversion, fiberglass hood, some kind of aftermarket rear spings and spring boxes, sub frame connectors, drive shaft loop...
Back
Top