Search results for query: *

Looking for a pair of 15x14 Super Tricks with 3.5in BS.PM with what you have.......

My '68 Hemi Dart has an alum-headed Hemi in it. Nice overall but the steering is SO easy I can steer it with one finger sitting still. I expect SOME effort with that much motor on topof the suspension. Anyone else have this "issue"? It drives fine & all that. I'm just curious if I'm the only one.

Looking for an early Duster body--minimal rust, title-able driver or not. What you got?

Anyone know where I can get a blank gauge bezel for my Duster project? I'm looking for one that has no holes in it-----just a solid piece of plastic where the gauges should be. I'm aiming for the minimalist look

PIck-up. 360 Magnum,727TF, 8 3/4 rear with 3:23 gears. sprayed-in bedliner, gauges restored, new upholstery on A100 seats. This is a nice "50 footer" that can actually be used as a shop truck, starting point or first-timers build as these trucks are real simple. Asking 9k OBO for the truck. May...

There's quite a few kits nowadays to convert the A-body to R&P steering---and all of them expensive, IMO. But back in the day early P/S cars had R&P using over-the-counter parts & retained the torsion bars. Anyone know how to do it or have good detailed pics? I'm trying to clone an early P/S...

1964 Dodge A100 truck with 360 Magnum/727TF. Seats & gauges restored 3:23 rear end, sprayed-in bedliner, body in "good" condition with panels replaced in major areas (between wheels, new front facia), new brakes, driveshaft. I'd like to find a "good" early '70s Duster. It just have to run just...

I'm looking to do a copy of Bobby Yowell's P/S Duster that S&M built for him. Anyone have any detailed pics of the car (interior, engine bay, airbrushing) or know what copy of SS&DI it was in? He was good enough to send me some PR pics of the car but I'd really like to get some others as I'd...

I'm looking to do a copy of Bobby Yowell's P/S Duster that S&M built for him. Anyone have any detailed pics of the car (interior, engine bay, airbrushing) or know what copy of SS&DI it was in? He was good enough to send me some PR pics of the car but I'd really like to get some others as I'd...

As the title says, I'm looking for a '70-72 Duster to do a tribute of an early P/S car. A roller is preferred and the more complete but not pristine the better. Driveline & suspension is unnecessary as it'll all be replaced. So long as the interior has a dashboard (instruments not necessary) I...

As you can see from my post in this thread, I have a bit of an "issue" with cooling my Dart. Size-wise, the radiator is as big as I can fit in the thing, the fans are about 13ins each and I'm running a Milodon waterpump with, IIRC, a 7in crank pulley & 5in waterpump pulley. Grant it the...

1964 A100 pick-up. 360 Magnum engine changed over to carburation, TF, 3:54 gears in 8 3/4 rear, new brakes, shocks, upholstery, wheels & tires. Truck is in "good" condition but has it's climate control system removed. This is a good "shop truck" for the REAL Mopar enthusiast since it's one of...

Anyone ever hear of or see an original S/S car bought new & registered for street use? Yes, I know they were only sold with an MSO but there are ways around such things & I was wondering if anyone had any pics or stories of one being bought new & used on the street. IIRC, Mr. Norm's sold the...

"Clone" can be a very broad term & judging from pics here, mine included, many aren't content with doing one "as shipped". Many are done "as raced" or the owners idea of what a streetable Hemi A-body would look like. So to that end, I'd like to ask : What set-up are you guys using to cool your...

Looking FOR A 7IN CRANKSHAFT PULLEY AND/OR A 5-51/2IN WTAERPUMP PULLEY OFR MY Hemi. Yeah, I know there are some out there "close enough", but these are what's needed. PM if you can help. Even a part number for such things would help

So I've got a collection of 25 diecast cars, mostly Mopars from the early P/S era, S&M, Vanke,etc. that kinda need to go. Knowing they go fro about $100 a piece, I'd like to sell the stuff as a whole for 2k. They've never been out of the boxes & some are signed by the owners or drivers. PM me...

Anyone know where I can get rid of my diecast collection? I got 25 of em, mosty Mopar P/S & S/S and I ned to get rid of the whole thing........

I know there's a ton of info out there, but I sure can't seem to find exactly what I'm looking for. Anyone know what "3A14" means on the right side of a 426 Hemi engine block? or if "0019 718" stamped up near the distributor is actually a (partial) Vin number ?

Anyone know the largest & quietest 3in muffler that'll go on a '68 Dart with it's springs moved in? I know the best location is right in front of the axle tubes & space is tight. But instead of running around muffler shops & getting "expert" opinions on what's best, I figured I'd ask some people...

Does anyone remember seeing in one of the Mopar magizines a new, smaller steering box? I vaguely remember reading about one but can't recall who makes it or anything else. I figured it'd be a bit of an advantage in opening up space in my Dart's engine bay.

Griffin alum radiator for '67-69 Dart. with 2 Spal 12in elec. fans. Radiator measures 26"wx17"hx3"thick & has inlet centered with outlet on D/S. Party is in Phoenix, Az & simply doesn't cool my hemi. PM for details or pics. Was almost 1k new, sell $450

Anyone have them? I saw them at SEMA & they seemed pretty nice but at $400 for one it seems a little pricey for a home garage/shop compared to a $40-$80 flouresent light fixture. Anyone have an opinion?

Okay, I know it's not an "A" body in the traditional sense, but seeing how this site caters to the smaller Mopars, I figured I'd ask. My '64 A100 truck has a nice,stock 360 Magnum/TF combo & will be used to tow my aluminum trailer with my Dart on it---kinda wanna do the "old skool" thing...

FOR SALE! '69 Dart grille, taillights, & doorpanels for sale. PM for pics & make offer......John

Okay, so it's finally time to start on my '64 A100 project----Anyone know the part number or where I can get the 2 shifter cables that goes in these trucks? They have a 727 where one cable goes inside the side of the trans & the other goes to the rear of the trans. Not sure why, but apparently...

Okay-------------'69 Dart, mini-tubbed, springs moved in, quarters NOT cut (ala S/S? cars), what's the widest wheel/tire I can fit in there & what's the backspacing?

What muffler with 3 1/2in inlet/outlet would you recommend for a '68 A-body? The car is mini-tubbed so the only place they'll fit is in front of the rear axle

So last November I was getting frustrated, tyring to fit my Hemi into the Dart while using an oilpan with a swinging pick-up. Lucky for me a friend brought me along to SEMA. I spoke to the guys there, voicing my frustration & all & they told me they were coming out with a new oilpan...

Looking for a tailshaft housing for an A100 pick-up or van. This is the weird piece that allows you to bolt the trans under a crossmemberby way of a tabon top of the housing. If you can help, please PM me.

My latest project is an A100 P/U that happens to need an engine. Lucky me, I happen to have an old 273 motor lying around but am not much up on smallblocks. Given todays technology, besides selling it, how would YOU guys build a 273 for your basic A100 street-rod type truck?