Search results for query: *

For sale is a clutch pedal set I bought awhile ago. Has been cleaned and painted. I bought it online I think on here awhile ago but I'ma let it go for $125 if buyer wants me to ship then they pay the shipping.

Hi I have for sale a Ram small block clutch set. I was going to do 4 speed swap but don't have time or money to do so. Part number 98766 powergrip. Normally goes for $459 but I'll let it go for $300 buyer pays for shipping if wanting it shipped. Any questions please let me know.

Hi I have for sale a SBM QuickTime scatter shield brand new. Was going to do 4 speed swap but don't have the time or money right now. This normally goes for around $999 but I'll let this go for $550 and if buyer wants to ship then buyer pays for shipping located near bay area

Here is a Mopar small block ram flywheel. I bought it awhile ago for a 4 speed conversion but don't have the time for it right now and it's my loss someone else's gain. It's a bullet steel ram flywheel part number 1503. Goes for 309 brand new but I'll sell this one for $150 Located in Bay area...

I have for sale is a HF125 autocoolguy pwm electric fan controller for sale.Works great probably has like 3 hours on it or so. It sells new for 265 but I'll let it go 185 and it comes with the sensors and the inline coolant tube mount. Let me know if you have any questions

Hi guys, I have for sale is a autometer transmission temp gauge. This gauge is new as I never got around to install it at all. Brand new in box. Normally it goes 85.99 on summit racing. I'll let it go for 65 shipped. Part number-2640

Hi guys, I have for sale a autometer vaccum gauge that I bought a year and a half ago. Never used it or hooked it up. Sat on my shelf but I never hooked it up. Brand new it goes for 93.99 on summit racing but I will let it go 75 shipped. Part number is 3384

Good evening guys I have for sale is a cold case 1.25 tube radiator for sale. I went a different route on my cooling system. Works amazing no issues with it and it has only been ran for about 10-15 hours at the most. I have the clutch fan too if interested as well. I would like to get $225 for...

Good evening guy, I have for sale is a Holley 650cfm 4150 4 barrel with vacuum secondaries for sale. This did come with electric choke but I did end up converting it to manual choke. When shipped I will include the electric choke parts in case you want to change it back. The carb ran amazing and...

For sale is a TCI Outlaw Shifter forward shift pattern that was barely used, maybe about 40 hours using it. Ended up going with a different shifter and now this one is collecting dust. The picture is when it was installed in my dart on the shifter platform. Also I will be throwing in a brand new...

Up for sale is a autocoolguy 85 pwm controller. Works great nearly brand new used it for about 200 miles and wanted to change from using the dual contour fan setup to something else so I had to upgrade a little to the hf125. This unit goes for 185 new but I'll let it go for 140. Any questions...

Question guys I know this has been covered in other posts but want to see what u guys think. So in front of me I have a Hayden clutch with a 18" fan. I do have a plastic Mopar shroud but doesn't seal the best. I also have in front of me is this derale setup with wiring and relay and better...

Hey guys so I had recently got a deal on a Holley sniper EFI, after the install and running I will say I do love it and it works great but I do have one question. Has anyone paired it with the bouchillion lockdown system at all? I currently run the bouchillion kickdown and I had to leave off the...

Hey guys up for sale is a 8 3/4 open third member. 3.23 gears, small u-joint size 7260. I upgraded to a sure grip unit. This third member worked great and I never had a problem with it. Hoping to sell local unless shipped on buyers dime. I believe it's a 489 case and I did paint it black to...

Hey guys up for sale is a 2 1/16 AEM air fuel ratio gauge. Never been used, all still in box with bung and o2 sensor, box was a little crinkled as u can see in picture but it's been sitting on my shelf for like 9 months. Was going to use it but ended up getting Holley sniper kit. Goes for 188.52...

Hey guys I know I have went over this in the past but I wanted to touch base and get some opinions. So if u don't already know I have a brand new built 340 to 373 stroker. Bearings across the board were .0025. I currently run 10w40 lucat hot rod oil. Engine now has hit the 6000 mile mark. When...

Hey guys seeing if anyone has a left back lens for a 71-72 dart. Also if u have full set then I'll just buy the whole set. My son broke out my left back up lens on accident

Hey guys so I had the transmission rebuilt and got everything back together and I have no reverse, after dropping the pan this is what I found. Is this repairable in the car and seems like they're is no tension on the rear band at all

How's it going guys well got a odd thing going on and looking for some advice or if someone has experienced this. So my dad and I went for a drive on about a month ago freeway,side streets, and mountain roads by a lake but at lower speeds. When coming back we came off the freeway I merged into...

So guys I need help, I had purchased a new sure grip 8 3/4 rear end pumpkin from quick performance(i think) through eBay in September. Well just finally got to installing it. Well I went to take it out today and noticed some things in not happy about. 1st one is I am hearing a howling when I...

Hey guys had a quick question so i recently had a 489 3rd member built and sent to me. I requested to have a 1350 yoke put on since i have a 1350 driveshaft from strange engineering. Well here is the problem i put the third member in and attempted to see how the u joints fit in the yoke and they...

Hey guys took a picture of my oil pressure at idle of 800 or so at red light? Is this okay for after engine had been been built? I was always told 1000= 10psi rule? I know it's at a angle but it's right on that line between the 0 and 25 If I put it in neutral it gains a few psi at a stop

Hey guys so right now I'm debating on a gear ratio to go with as I am going to upgrade from 3.23 open. Don't know whether to go 3.55 or 3.73 340 bored and stroked to 373 727 tranny 215/60/14 tires(will change soon bump it up a little) 3200 stall 10 1/2 converter Also my cam is a XE275HL 231...

Alright guys well kind of have a debacle question going on so here it goes. So I had received from my dad some Mopar performance subframe connectors for my 71 dart swinger. Well I pulled my car into the shop to put it on the lift so we could weld them in. So I know right off the bat it was a...

Hey guys well after the transmission debacle plus the shift cable I fixed that. Here is a video of it idling warmed up after I went for a drive, so far put about 250 miles on the build about to do first oil change (even though I had to do a oil change of break in oil due to being paranoid) lol...

Hey guys just want to double check something might just be paranoid. So on my 340 I have Edelbrock rpm heads and I am using Arp head studs. I was going through paperwork and came across the head instructions and it said something about replacing one of the studs with the supplied head bolt...

Hey guys so i finally went for a drive with the dart but something horribly went wrong. So to start off its a 71 dart with a 340 bored and stroked to 373 with a 727 tranny with 3k stall. So i installed the tci fast gate shifter(routing the cable was a *****) So i wanted to take it down the...

Hey guys so I am running my 71 dart swinger small block 727 tranny. I have Doug's long tube headers and want to run 2 1/2 exhaust. Well I encountered the cross member problem with the exhaust hitting it. So i tried doing this myself . Go easy on me guys and as for my welding it's been a bit ...

I know there is past posts about this but I'm having the issue of number ú header tube hitting the steering couple, what is the correct solution for this? Shim steering column and steering box? No don't want to dent header unless absolutely necessary Grind coupler? Replacement coupler or...

Need a driveshaft for a 1971 dart swinger 340 727 8 3/4