Search results for query: *

  • Users: Don K
  • Content: Threads
  • Order by date
  1. Don K

    Another Holley jet question.

    I'm making progress on my 67 Barracuda and it's time to rebuild the carb. I have a Holley 4165 650 cfm. I'm putting it on a 74 360. The engine is a mild build 30 over 9:1 compression stock heads mild cam what we used to call an RV cam, I don't recall the specs. And headers. I will be running a 4...
  2. Don K

    [WANTED] SB Inspection cover

    I would like an inspection cover and dust shield for SB 10.5 in. bellhousing. Let me know if you have them and want to part with them. it's for a 10.5 inch clutch bellhousing. Thanks
  3. Don K

    Paint Color Question

    The interior of my 69 Barracuda is R6 Scorched Red. I have a few pieces that need paint, I found some online 12oz can about $36. I don't mean to be a cheap *** but has anyone found a close match that could bought at the hardware store? I don't need that much so paying $6 instead of $36 would be...
  4. Don K

    [FOR SALE] Man Cave stuff

    I got this stuff at an auction I bought a pallet ( I have a problem) and this stuff was included. I have a lot. It's Atlas brand Chevron's house brand back when service stations worked on cars. I think it's from the 70's. It would be cool in a man cave or Valentine gift. I will sell it in lots...
  5. Don K

    Header removal

    So I found an easy way to remove old rusty rotted out headers. I tried removing them the traditional way but 50 years of rust made it impossible.
  6. Don K

    Anyone have an Olds 442?

    I know this is a Mopar site, but I tried this question on the Oldsmobile forum and no help at all. I have a friend her husband died about 6 months ago, she has his 69 442 with a 455 and auto trans. It hasn't run in 32 years. She would like to get it running again. I told her I would make it run...
  7. Don K

    Metallic paint question

    I like to paint my own cars. I haven't done a bunch. I have always used high gloss single stage. I'm not the best painter so I end up with some orange peel here and there. I have pretty good luck wet sanding and buffing it out. I have read that buffing a metallic paint can screw it up. I have...
  8. Don K

    65 Barracuda exhaust pics.

    My father in law owned a muffler exhaust shop for 30 years. He still has all the equipment and is helping me with the dual exhaust on my 65 Barracuda. I bought a kit from summit that is for a 67, it's close. The problem is the kit is for headers and I'm running manifolds. So we have to build...
  9. Don K

    Thanks

    I finished the 65. A big thank you to everyone. I asked questions, bought parts and read how to articles on this sight. I did all the work myself and it is driver quality but that's how I want it. Here are some pic's thank you everyone.
  10. Don K

    B body LCA

    I found a pair of LCA on craigslist pretty cheap, that came off a 71 Charger. Are they all the same? Will they fit an A body? I don't need them right know but might be handy for future projects.
  11. Don K

    [WANTED] 65 Barracuda door locks

    When I bought my car it did not have door locks. I need 65 and older it has the key hole type. I need two. Any help would be appreciated. Thank You
  12. Don K

    [SOLD] Thermoquad

    Thermoquad 9002S has 1 1/2 inch primaries (800-850 CFM). I got it with a bunch of carbs and I don't need it. Everything moves freely and it appears to be in good shape. I'm sure it will need a kit. I'm not looking to get rich just what to pass along to someone that needs it. $65 and I will pay...
  13. Don K

    [WANTED] 67 barracuda patch panel

    Looking for passenger side fender lower patch panel. I can find driver side but no passenger side. If anyone has one they can part with let me know. Thank You
  14. Don K

    65 barracuda exhaust

    Just wondering has anyone put a 67 barracuda summit exhaust system on a 65? The summit system is way cheaper than a TTI. I have access to a pipe bender, so wondering will the summit system work with small modifications? And yes I modified the trans brace. I could do a custom exhaust but I'm not...
  15. Don K

    Voltage Limiter

    I have my dash apart on my 65 Barracuda, I'm replacing wiring harness ect. While the instrument cluster is out I thought I would replace the voltage limiter. They are all over the place in price, but Classic Industries has one for $10.99. However it states it's for 66-74. It looks the same as...
  16. Don K

    [WANTED] 8 1/4 or 7 1/4 BBP rear end

    A long shot I know, but you never know. I'm in southern ID and am willing to drive up to 5 or 6 hrs. I have a 74 duster slant 6. I will be putting disks on the front, so would like to go BBP all the way around. I will be keeping the slant so a 7 1/4 will work. I would rather not drill or use...
  17. Don K

    [WANTED] 65 speedo cable and housing

    I'm progressing with my build of the 65 Barracuda. The speedo cable and housing are shot. And as a matter of fact not even the correct one. I noticed a few months ago someone looking for one and several people had them. I would very much appreciate if someone could part with one. It is a 65 so...
  18. Don K

    Amp meter reading backwards

    Recently picked up a 74 duster and been working out the bugs. I found it was not charging replaced the voltage regulator and fixed the problem. About 14 volts to the battery but when I looked at the amp meter in the car it is reading discharge. So before I start tearing things apart any ideas...
  19. Don K

    [WANTED] Holley 1945

    Looking for a good carb or rebuildable core. Of course don't want to spend a lot. If you have one sitting around let me know. Thanks
  20. Don K

    [WANTED] Super six intake

    A super six intake only or the hole set up. Thanks
  21. Don K

    Super six

    Could anyone tell me if the exhaust outlet is bigger on the super six set up? Thank you
  22. Don K

    74 Duster Question

    I need another project like I need a hole in my head. But this car peaked my interest. Near where I live a guy has a 74 Duster with a slant 6 and a 3 on the floor for sale. Back in the day I had a 72 with 318 and 3 on the tree. My Question, is this fairly rare to have a 3 on the floor? Can't say...
  23. Don K

    340 starter

    I am helping my son put a 340 in his 68 dart GTS. The car has headers and the old gear reduction starter, it's a tight fit. I have read on this forum about using a Dakota starter. If this will work what year or what other option? Thanks
  24. Don K

    65 hurst shifter help

    I have a 65 barracuda with 4 speed and hurst shifter. It has a lot of play in it, so would like to rebuild it. All the kits I'm finding are for 66 and later. Is there a difference? If so any one know were I can get a kit, or do I need to update to a newer shifter. Thanks
  25. Don K

    E body NP833

    I know A and B body 833 are different, but I found one out of a 70 challenger and would like to put it in my 67 Barracuda. Can I do this with out much modification?
  26. Don K

    833 for A body

    I have a 67 Barracuda that was a slant six car. When I bought it the owner had started a small block and 4 speed conversion. The clutch and brake pedal assembly has been installed and a hole cut in the tunnel, that is it. I have a 318 and 904 sitting in shop I could use but would rather have the...
  27. Don K

    67 barracuda manifold

    I have seen a lot on this sight about exhaust manifolds. But I'm still unclear. I have a 67 barracuda that I'm putting a 318 in. It had headers for a B body. I would like to put a set of manifolds on it. I found a set off a 78 318 will they work?
  28. Don K

    Flooding

    Ok not my car or an A body. My brother just bought a beautiful 69 coronet with a 440. The car had been sitting in a garage for several years. When car is first running hot or cold runs great after a few minutes floods out. I can see fuel drippings from the primary venturis. When hot or cold the...
  29. Don K

    65 barracuda quarter panel.

    I have a 65 Barracuda in need of a right (passenger) quarter panel. The patch panels I have found are not big enough to repair the damage. I have been unable to find a complete one for a cuda, howevere I found 66 valiant Quarter. Other than the obvious Rear window difference, anything else I...
  30. Don K

    [WANTED] 65 273 intake

    I am looking for a 4barrel intake for 65 273 ( hard to find I know) stock or after market will do. Thanks
Back
Top