Search results for query: *

I’m hopeful for some answers. I have an old mark 4 evaporator that I would like to install under dash and install a new system under the hood. Is there a way that I could do this? New system is new Freon of course but the mark 4 ran on the old style Freon. Is this feasible even or just stick the...

I am in desperate need of a few parts to be able to install an older version of an A/C unit that I was gifted from a MoPar man, Paul Carr. I have his old system but need a pulley and dryer and compressor to get it installed. My car is a 1965 Plymouth Barracuda 273, non air with power steering...

For sale: 1964-65 Barracuda and 1965 Valiant RIGHT AND LEFT upper brake lens! $85/each plus $15 shipping Also have the reverse lens for sale $80/each plus $15/shipping, AND the indicator turn lenses $40/each plus $15 shipping WITHOUT the middle badge for sale. (You can remove your ‘old ones’...

lllll MADE IN THE USA lllll Made from state of the art 3D Printing, these lenses are fantastic! Unlike some others, mine are hand made and very tedious to process. Right down to the silver hand painted on the inside of the cone and inside outer rim. UV infusion to protect from harmful UV rays...

Made in the USA, these lenses are produced from state of the art 3D printing technology. UV infusion into the lens for longer lasting effects. $85.00/each plus shipping $10. And taxes if applicable.

I have a few 3D printed left from the first run. Then onto the upper brake lens. $95.00/each + shipping and taxes These are replicas NOT OEM. No copyright infringement. PM me if interested

Price is $95.00/each lens. Plus shipping and taxes These are pure works of art and the craftsmanship that goes into these. These are made from a state of the art 3D printer. UV protection is a must that is infused with the resin. Hand clipped from the supporting braces individually. Then hand...

Just a heads up everyone. I started a new business, RB Replicas, I have state of the art 3D printing available for hard to obtain lenses. Right now I’m in the final phase and printing the reverse lenses for 64, 65 Barracuda and valiant. I’m almost sold out of my first batch which will be...

This picture is a representation of finished product. I will have a finished one soon to post picture of. These are high quality professionally done 3D printed with state of the art printers. Made in the USA Also they are NOT made from an injection mold where you have defects. Unlike others I've...

First prototype should be done by 9:00am. Then cure and inspection time!! Fingers crossed This is for a 1964, 1965 Plymouth Barracuda reverse lens minus the red red reflecting ring

I have two sets of interior trim in excellent condition that must go. I’ll take $150 plus shipping for ALL four pieces. These are in great shape. Two are for the rear door panels and two are for rear cargo area on the sides. Pm me if interested please

In order to pursue my 3D project I need to sell a few items. I have on this post, trim in excellent condition. Each set of two pieces I’ll let go for $100.00 or best offer. One set is for the rear passenger compartment panel trim. Other set is for rear cargo compartment. $100.00 plus shipping...

I have both rear panel chrome trim pieces off a 1965 Barracuda for sale. Excellent condition. $180.00 plus shipping from 54636

Okay if I can get ahold of the exhaust manifold heat shields I’ll get them on. Now, does anyone know of where I can get drivers side for sure and hopefully passenger side to. 65 273v8 I’ve looked at the usual places, Layson’s, classic industries, Summit Racing Equipment, eBay,,,,nothing Help...

My daily

I’m in the process of getting my garage built and would like to have on the floor a ten foot round diameter ‘M’ like the blue Mopar. any advice on how to paint it on the floor before sealing floor? I think it would be cool

I got this from a neighbor friend of mine. It will look nice in my new garage/shop I think

Since I’m in Facebook jail for another 22 day’s I just have to share my news with fellow A body friends. I’m finally getting my garage built! Only have to go to the bank but we both have excellent credit scores. And bank just said, let’s make this happen!! As my header states, it’s only a 24x48...

I’m wondering if these headers will fit my 225 /6 only information the seller has is he does not know for sure what these are off of. Any information would be greatly appreciated. I would like to put these on my 1972 Dart Swinger 225 /6 automatic. Along with an Aussie 4 barrel intake and an...

I’m wondering if these headers will fit my 225 /6 only information the seller has is he does not know for sure what these are off of. Any information would be greatly appreciated. I would like to put these on my 1972 Dart Swinger 225 /6 automatic. Along with an Aussie 4 barrel intake and an...

In search of NOS cable for speedometer that fits my 65 Plymouth Barracuda 273 V8 automatic transmission

Looking for an OE gas tank locking ring and gasket. the one the PO put on with a new tank leaks a LOT. Goes in a 1965 Plymouth Barracuda.

Looking for an OE gas tank locking ring and gasket. the one the PO put on with a new tank leaks a LOT. Goes in a 1965 Plymouth Barracuda.

Just throwing this out there in case anyone is thinking about redoing inside panels or dash pad. This is in my 65 Barracuda and they along with dash pad turned out pretty good Product is SEM

Hi all, hope you can help a newbie out. Here’s the situation, I have a 1965 Barracuda, 273 v8 dual exhaust. It has 10” drum brakes that I’m working on. I’m able to purchase a kit for everything except the spring that goes on the bottom of the brake. My 65 service manual calls it a ‘lever return...

My manual says .17 for the point gap on my 273 that sound right? It’s still not firing

In my 273 I pulled the previous owners plugs out. They were the short plugs meant for a bb, and TWO different kinds. I bought correct plugs but come to find out they won’t go in all the way. With it running on short plugs it must of gummed up the threads. Is there a safe way to clean the threads...

My situation, I’ve got a 1965 Plymouth Barracuda with a 273 in her. I’m in need of a new distributor cap and innerrds and would like to know what I can use. It’s a really tight fit with it being right next to the firewall. What can I use?

Getting some more done today on my 1965 273 Plymouth Barracuda. Throttle and kickdown all in place, now come to find out my fuel pump isn’t working. Went to Napa and they gave me the wrong pump!! Dang it, now I’ve got to wait until Monday to exchange it. The parts number is right but the arm on...

I getting ready to start piecing my 65 Barracuda back together, engine wise, and I think I’ll leave the intake VHT flat black. With the Edelbrock and the D4B Raised lettering touched up with silver. Or should I do it in red like the valve covers?