Search results for query: *

  1. David66dart

    66 dart gasser options

    How was the steering set up? This ci UK ld be much more cost effective then the speedway kit. Although everything in the kit is new
  2. David66dart

    66 dart gasser options

    I am building my 66 dodge dart. Threw it togother with a small block and ran it for about a year, I'm building a 451 now and I was thinking it would free up a lot of space to make it a gasser. I found this speedway kit for a chevy nova. The novas frame rails center to center are almost identical...
  3. David66dart

    408 cam / build help.

    Thanks for the links, I will take a look.
  4. David66dart

    408 cam / build help.

    Yeah it sounds all too familiar man
  5. David66dart

    408 cam / build help.

    Well shoot now I want to go with a forged crank and h beam rods but if I made that power I would need to build my trans and probably do away with my 8.8 that I had a costom drive line made for. I always forget that speed is just a factor of how deep your pockets are
  6. David66dart

    408 cam / build help.

    If I were to throw on some eddlebrock rpm heads with that 525 lift cam (or another decent cam) with true 1.5 ratio rocker arms what is the likelihood that I will push past the 500hp number assuming a 10~ ish to one static comp ratio
  7. David66dart

    408 cam / build help.

    Good to know. I don't want that
  8. David66dart

    408 cam / build help.

    What kind of price were you thinking for it
  9. David66dart

    408 cam / build help.

    If the guides are trashed tilt?
  10. David66dart

    408 cam / build help.

    Good to know, just curious... What's wrong with eagle cast cranks?
  11. David66dart

    408 cam / build help.

    I can agree with you 100%, I have a 360 in my dart now making upper 200s low 300s and it already feels slow to me
  12. David66dart

    408 cam / build help.

    interisting, that is good to know. I have not seen the heads yet But I had a guy tell me he had some heads that could be slapped on how they were for 750 but he was not a well known source so I would need to be cashious. I also might just put the motor togother with the heads I have now with...
  13. David66dart

    408 cam / build help.

    Thanks. Worth it to buy a set of ready to run x heads other then still needing to port them for 750?
  14. David66dart

    408 cam / build help.

    Thanks for the input I will keep that in mind and will get my blocks sonic tested.
  15. David66dart

    408 cam / build help.

    I am building my second 360 motor which will be a 408 stroker. I am 17 and experience is limited. The blocks I have are a 1971 block (30 over) and a 1977 block (30 over) block preference? I have some 77 heads with 1.88/ 1.6 valves I will be using, i will be doing some porting. anyone have ideas...
  16. David66dart

    408 cam / build help.

    I am building my second 360 motor which will be a 408 stroker. I am 17 and experience is limited. The blocks I have are a 1971 block (30 over) and a 1977 block (30 over) block preference? I have some 77 heads with 1.88/ 1.6 valves I will be using, i will be doing some porting. anyone have ideas...
  17. David66dart

    Cam break in during cold weather?

    Thanks all for the info I broke in the motor today and all went well other than an oil leak that i will need to fix.
  18. David66dart

    Cam break in during cold weather?

    how would I check initial timing sense the motor will be at rpm and be advanced from mechanical/ vacuum advance. what should timing be when im sitting at 2200- 2500
  19. David66dart

    Cam break in during cold weather?

    Good idea. Thanks much! yeah my friend said the main reason that it could be bad was because it had a higher chance of running lean but i don't think the more dense cold air would effect it that much would it?
  20. David66dart

    Cam break in during cold weather?

    I currently have 5w 30 oil in it with break in additive in it and flat tapped cam additive in it.
  21. David66dart

    Cam break in during cold weather?

    I have a very mildly built / freshened 360. (FLAT TAPPET cam + intake, 30 over pistons and a few other little things) I want to break in my motor tomorrow or Monday. The day time high is predicted to be 35* F. My friend told me that this may not be a good idea but I wanted to get more...
  22. David66dart

    Estimated hp and tq. 360 la

    sorry it took a while to get back. they are seald power 405 p pistons. i didnt know at the time so ya.
  23. David66dart

    66 dart project. Slant six to 360, 360 to 451

    66 dart project. Slant six to 360, 360 to 451
  24. David66dart

    [FOR SALE] 1966 slant 6 225 motor for sale. $200

    1966 slant 6 225 for sale. It comes with everything that was on it. fuel pump, alternator, fan ect. It was pulled out of a 1966 dart. I have a video of it running, it was not running extremely well when pulled but i took it down the road and got onto the freeway. it had compression at around 125...
  25. David66dart

    [FOR SALE] 1971 360 intake and exaust manifolds.

    I have a 2 barrel intake and a set of exhaust manifolds off of my 71 360 block. 20$ each local pick up only. Seattle W.A.
  26. David66dart

    Estimated hp and tq. 360 la

    Thank you for all your imput! I will be using the 904 now.
  27. David66dart

    Estimated hp and tq. 360 la

    Well, I have a 904 that would bolt up, but how would the 904 hold up to the occasional track day and just being thrashed on? It came out of a 68 charger or challenger. Can't remember. Also if i decided to go with the 727 is there really any downfall to it having a short tail shaft? I mean either...
Back
Top