Search results for query: *

Just changed my seats in my 73 Valiant from a bench to a set of pro car buckets. My current belts are the retractable lap belt with attachable shoulder belt. Obviously the buckle part is too long since it was for a bench. looking for a set of front belts for buckets that I can replace them with...

Decided to sell my 6318 (1973 340 manual transmission) thermoquad I purchased in 2020. I originally paid $400 for it from a credited rebuilder who has an ebay store. This is not some Rockauto Reman, this one was rebuilt correctly. I originally wanted to run this on my 318 but after only 2 weeks...

I am mocking up the rocker arms on my 340. I am using a set of Crane 1.5 rocker arms that came with the engine I purchased. I am running a Mechanical solid cam. My issue is during installation I am noticing that the outer arm on for the number 1 Exhaust is rubbing the shaft mounting tower. This...

Decided to sell my 6318 (1973 340 manual transmission) thermoquad I purchased in 2020. I originally paid $400 for it from a credited rebuilder who has an ebay store and dose this on the side with great feedback from other buyers. I originally wanted to run this on my 318 but after only 2 weeks...

Listing a set of X heads I am not going to use. They cam off of a 340 I bought a while back and I am using a set of later 360 2.02 heads. IMM checked them for cracks and they are good heads. Guides are good as it looks like the previous owner recently replaced them. Selling these bare, $400...

Looking for some recommendations on a good performing intake manifold for my 340. Here are my specs. 71 340 .040 over. Keith Black pistons KB243 Comp Cam 2705 270/270 Duration .468/.468 lift 110 centerline 360 heads 2.02/1.60 Stock crank, stock rods. Hooker headers 904 transmission with...

I have for trade a Mopar M1 intake manifold that I originally traded an air gap intake manifold to run on my 340 as I wanted to use a thermal quad. After doing some research it looks to be that while the intakes share the same casting number which on the intake is not the part number. There are...

So I am getting ready to seal up the lower end. The engine is a 1971 340. When I lay the oil pan on top without a gasket it looks like the factory windage tray that has a curled edge is interfering with the pan. My question is how do you go about installing the pan with the tray? Here are some...

For sale are 2 dart finish panels. Both for $100 plus shipping. They'll be listed for 1 week then scrapped. Thanks

Decided to go to the spring fling again this year to sell some stuff and also look for some stuff for my A bodies. Wondered if anyone else that went thought that it was a bust when it came to A body parts. Last year there was a good variety, but this year noting but E and B bod parts.

Hello, I wanted to see if its worth it to spend the money on a stall converter. Right now my 73 Valiant has a 318, with huges whiplash cam and 3.55 rear gears the transmission has a B&M shift kit that I added when I did the rebuild otherwise it is stock with the stock converter. It will soon...

Up for sale is a 1973 318, fresh bore .030 over done by Indio motor machine. It has new engine tech pistons. They sit a tad taller then sealed power pistons. King rod bearings and sealed power main bearings. New core plugs, Dura-bond cam bearings, distributor drive shaft bushing. Crank is still...

I have a rotisserie for sale that my dad built and used when he was restoring his 1970 Cuda. It has slots on each side so it can be raised and lowered by the jacks on each end and with the bolt to hold it in place. It also has a bolt on each side that can be loosened so that the car can rotate...

Looking for a set of bolts for my 340 windage tray. I have the main bolts but need the for small ones that bolt the windage tray to them. Thanks

Lightly used pitsburg 1 ton overhead hoist. Has been inspected and rated almost double its rating. These are $849 new not including wench. This will include it. Would like $500 obo Would also trade for 440 block with timming cover and main seal carrier. Pickup in Indio CA 92201

So I have a weird one here, and I'm not a fan of electrical problems. My 1975 Dart sport has started giving me issues when I try to start it. It will crank over but will not fire most of the time. Some days it does but most of the time it acts up. If I keep the key in the run position and use a...

Looking for a set of front retractable seatbelts for my 75 dart sport. Please see pictures below on what I'm trying to look for. Please pm me if you have a set for sale. Thanks

Looking for a good used set of front seat 3 point retractable seatbelts for my 75 dart sport. Dose not mater if the wiring for the seatbelt sensors are bad. Need new belts to replace my frayed existing ones. Thanks

Looking for an alternative to the rectangular ignition switch connectors on the my 73 Valiant and 75 Dart. The one on my Dart is broken on the dash harness side and is not easy to find a new one. I am also getting a loose connection on my Valiant so I want to replace it. Looking for...

I'm getting ready to install my windshield on my 75 Dart sport. I came across this video showing how its done. My issue is when the window is in the seal the video shows the guy reusing the the inner part of the old seal, I guess referred to as an seal Expander? The new seal does not come with...

Looking for a stock radio to fit my 72 dash, it does not need to work as it's just there for looks but would like it to look decent.

Looking for the dash harness side of the ignition switch and turn signal switch connectors like the picture below.

Looking to see if anyone knows where to find the dash harness side of the Ignition connector and multi signal switch connectors pictured below. Thanks

I was taking apart my column out of my 1975 Dodge dart and I see that the plastic sleeve that is on the shaft is broken, is this something I should worry about? Thanks

Looking for a passenger side door card for my 1975 Dodge Dart Sport, does not matter what color as I will paint it black, but in good condition. If you have a pair Ill buy both as I know its hard to just sell one. Paypal ready and I live in Southern CA willing to pay for shipping. Thanks!

I am looking for a few pieces for my Dodge dart sport. I am looking for a good non chalking driver side A pillar molding in black. I am also looking for a Non cracked driver side upper door molding and a pair of inside door handle inserts if you happen to have any please let me know, I have...

Pulled my K&N cold air intake of my wife's neon (was mine) and went back to stock. Go for 280 new. 125 plus shipping. PayPal only thanks

2 sets of 318 pistons, Sealed power with Mahale rings std bore $100 plus ship, can fit them in flat rate box. Engine tech pistons with rings on them never installed. .030 over bore, $75 plus shipping. PayPal only thanks

Complete set of six pack rods out of a 73 440. $80 plus shipping.

Mopar valve covers with small damage shown in pictures maybe repairable. Never leaked even with crack $125 plush shipping Obo Edelbrock valve covers with high baffles $50 plus shipping. PayPal only, thanks