Search results for query: *

  • Users: Nat
  • Content: Threads
  • Order by date
  1. N

    i'm going to refresh one of my total stock 1970 340's

    would it hurt the value , if i were to sell it in the future if i put in molnar rods and crank with some nice light forged pistons . or should i just keep it 100% factory they ran well when i put them in storage 12 years ago . just wondering what would bring in the most money if i ever did...
  2. N

    So the speedmaster heads were measured

    port came out at 175cc 5 better than advertised we shalll see as the heads are gone through if the are any glaring defects or advertsing BS SO FAR THEY CHECK OUT chambers are 65cc . still looking for trickflows because I am insane speedmasters will make nice paper weights
  3. N

    need advice on what cam , springs and things to get for my 340

    just got the speedblaster heads trouble is they are for flat tappet cam , i'm using 1.6 hughes roller rockers and lifters so have to change the springs and need a cam , . now this cam is not for all out speed more of a daily driver if i want to go fast i'll drop the 426 in it . i want it...
  4. N

    anybody using the M+H Cheater slicks

    i can't get the MT Cheater slicks they never really hooked with my car , wondering if the M+H are any better size is 245-55-15 biggest i could fit
  5. N

    update on my 426 stroker

    got it apart measured everything and all was good no wear , the 23 cc pistons are out 13cc pistons weigh in at the same weight 599 grams no rebalance needed , 1st bit of luck in 3 years . a\so now compression should be up to 11.1 or so , now i just have to decide on a cam before i button it...
  6. N

    Where can i buy the hood scoop gaskets

    for a 1970 dart 340 factory hood . i bought seals 5 years ago from DMT and they did not fit they were to small i think , would like new ones as mine are ratty falling apart after 50 years thanks
  7. N

    do they make a fiberglass hood for a 70's dart ?

    also looking for fenders as well, want to lighten the front end thanks
  8. N

    will a super victor intake

    and Street Demon 750 fit under the stock hood , running an air gap and holley 670 now and it fits fine , getting conflicting intake heights on the super victor . or is there a lower profile Victor model I can use ? thanks sorry 1970 340 dart
  9. N

    what is the biggest 15"tire

    that will fit a stock ride height 1970 Dart ? And what backspacing would be needed on the 15x7 wheels ? I HAVE 235 15X7 tires and wheels out back
  10. N

    so i'm rebuilding my original 1970 340

    i want to have the lightest rotating assembly possible , forged crank h beam or I beam rods and forged pistons , don't want a speed demon more for highway driving ,maybe a road course once in a while \guess i'm going to go roller cam on this build going to use the hughes rockers and morel...
  11. N

    So you guys were right , after 5 years

    the shumacher motor mount let go engine lifts over 1 inch with a little gas brake or giving it gas on the road . now looking for some good engine mounts . damn . Thought the mounts would last longer . anything good out there besides solid mounts as i drive the car every day don't want to much...
  12. N

    look what happened

    when things hooked up well ,only thing that held things together was the sway bar . car has frame connectors and cheater slicks . drove it 30 miles to the shop in that condition , drove slow , real slow
  13. N

    Looking for an oil pan replacement

    just not comfortable with the stock 360 oil pan on the 426 stroker . What would be a good replacement that has decent ground clearance and be good on a road course with the engine spending most it's time at 4,000 to 6200 rpm . That is if I ever get it to run right , not a good year , it's...
  14. N

    I'll be changing the pistons on my 360/426 stroker

    going from 23cc dish pistons to 13cc dish pistons to bring compression up a bit . Am I going to have to balance everything again ? Or can I just slap it togetjer and hope for the best ? that is what happens when you don't think about everything when putting together an engine , just took what...
  15. N

    Anyone here know of a quiet vacuum booster motor?

    I have one from Summit , trouble is it sounds like I have a baby crying in the trunk and it is loud . pump works but is driving me crazy Just wondering if someone is using or knows of a quiet vacuum booster pump . this is the one i have LEED Brakes Bandit Electric Vacuum Pump Kits VP001B...
  16. N

    looking for the right intake for my 426 stroker

    it is the Hughes kit has bigmouth ported heads from Hughes ,1.6 roller rockers and lifters now running a ported Air Gap but it runs out of breath at 5500 rpm 530hp 560 tq at 4400 I want an intake that will peak at 6500 or a touch more so I think the Victor is to much I will never run 7000+ ...
  17. N

    Anybody using QA-1 shocks

    i bought the 2 way adjustable shocks have not put them on yet , Anyone here used them ? and if so what are your thoughts on the m , good bad , or should I sell them and get something better ?
  18. N

    I'm using Hughes roller lifters and

    roller rockers on my 360 . they say to use 10w 30 oil only I've always used royal purple XPR10-40 will I Damage the lifters using the 10-40 or will it be safe to use once the engine is broken in ? Anybody using these lifters with oil heavier than 10w-30 ? okay I'l play find a photo...
Back
Top