Search results for query: *

I just read the nhra rulebook section about windshield and it says thickness is .125 Also it states, must be clear or factory tinted. Does clear mean "transparent" only or clear as in no added tinting ? Thanks

I'm trying to buy a 1350 pinion yoke, just wondering what I should get ? What you guys use? Build is, in case you haven't read any of my thread, 470 big block, high 600 HP high 600 ft lbs. Foot brake, 727, dana 60. I was looking at strange engineering billet but it's out of stock till March and...

I'm looking to replace my floor pans on my 70 dart drag car. There's too much crusty and thin areas, so rather than patching id like to frame the area and replace it with nhra minimum thickness steel .023. If anyone has any pictures of their cars flooring/framing I'd like to see them. As the car...

I was just screwing around the last 10 minutes at work and grabbed a shitty used valve and started grinding. I started off with a 15° back cut which is nearly a perfect blend into the radius going up to the stem. 30° 45° 50°. I cut those angles first then working in reverse I made a 50° seat...

Is it ridiculous & is it possible to turbo charge an engine with near 13.1 compression? I'm very inexperienced in boost, one could say a dummy. Engine is 471 with two 850s on a tunnel ram. It makes about 690hp & 667 ft lbs n/a. Just wondering what you guys would do ?

I see there's a few companies producing new castings for gen 2 hemi and wedge. I was watching a video from Mopar something or other dude who doesn't know ****, tours callies shop. I mentioned low deck blocks, if they were made they would sell. He, guy who doesn't know **** says there's no...

Cost differences Between a 10 second car and a car in the 9s ? Nhra license. More sfi certified parts ? Nhra Cage certification. There probably some other things I'm forgetting but I just want to know if anyone has recently gone from 10s to 9s and what was different. Thanks guys. I'm thinking...

Who right now makes a kit to rebuild a factory manual steering box. Im looking to be a low 10 second car and would really like some stable steering lol. If anyone has any leads I'd really appreciate it.

Or check this out lol Hey @-Boosted- . This shirt is awesome. Thank you!!! Here's the front, back and sleeve.

I'm working on a set of eq magnum heads with plus .100 length valves . Problem is the valve springs. Installed height is 1.700 and the seat pressure is low. I guess the cam is .553 lift with 1.7 rockers. The springs are at coil bind before max lift. Has anyone had success with this & if so what...

Just wanted to post a video, can't figure out how

I'm looking for a lightweight steering column kit for my 70 dart drag car. If anyone has any recommendations on what they use, made work or maybe even a company that actually makes a freaking part for a mopar could you please let me know. I've been on the net looking around but haven't found...

Besides rpm difference what would be the expectation from a 4.56 gear vs a 4.10 gear ? I'm going to be putting my dana 60 together in a couple weeks after I finish prepping it. The car is a 70 dart, I'm guessing it will weigh 3300 with me in it. The slicks are 30.6 tall. By the Dyno numbers I'm...

The dana 60 I have is narrowed original to 68-69 b-body. I bought it as a complete unit with 4.88 gears and traded the power lock back to the original owner for a spool. I sold those gears to a buddy. So now is time for me to put it back together regeared with 4.10 and spool . Is there a step by...

I'm about a week out from putting my 471 back on the Dyno after nearly a year of being apart and doing a few more things for the betterment of it. My compression (WAS) at 11.6:1 and I was running 108, I was running a fairly small camshaft 260-264 @.050 . (NOW ) the cam is still small, just a...

Frontier park, Graham WA. It's a pretty cool Mopar show and swap meet. Good enough to drive 2.5 hours. I'm hoping to find a fiberglass hood for my 70 dart. Last year I got a near mint condition 70-71 grille for $200.00 so there are some good deals there. Hopefully I'll have my car there next year

I decided I am now going to remove factory floor pan. I will replace it with .032 aluminum. So that part is easy, the part I'm semi-struggling with is information on what a legal floor frame consists of, what is allowed for tubing, diameter and thickness. I have mostly completed my 12 cage and I...

My ram 06 2500 a/c doesn't work. Last year I replaced everything under the hood pertaining to the a/c system. Fuse doesn't have power I powered up the ac system with a power probe and it worked. Does anyone know how to bypass the fuse panel , any way that will work and not freeze the thing up...

I've got a Dana 60, strange 35 spline axles, 4.56 pro gears and a spool. I am thinking about taking the spool into work and machining a bit of the press off of the bearing surface so the bearings can come off and on to set up the gears without having a pain in the ***. Anybody have experience...

I got this car in 2018 for $400.00, It sat at my mom's until 2021 since I had nowhere to put it. My wife and I bought a house out in the country and now I have a place to work on it. So I'm in the destruction - reconstruction phase. Mock up. I apologize I haven't been great at remembering to...

I'm working on removing mine, I wanted to see what some finished product look like. Thanks guys.

I have a 70 dart with an obvious little bit of crunch on the driver side frame rail and where the front bolt of the k-member must have kept it from going up, it appears to be pulled down an 1/8 of an inch or so. Also a dead giveaway is the thick pinch weld that would be directly under the...

What the hell were they thinking, there new website is a disaster compared to there old website. Honestly I can't find sheeit. Keywords brings up all kinds of stuff, that don't pertain. Give me the option to look around, because I don't always know what I want to buy lol

Seattle Mariners vs new York Mets Seattle wins 1st world series.

I'm looking for a very inexpensive big block bellhousing to be used for Dyno usage. Any will do I think. Don't care if it's ugly greasy and rusty, just big block Mopar bellhousing. Thank you

I have a milodon single line external pick up and hv pump and the 9 quart super stock pan . Milodon says that set up is good for 7k rpm. Is that a fact or is that a sales strategy to scare me into buying the next step up ? I'd hate to find out the hard way and I don't think my engine will see 7k...

I recently ordered a set of new tti headers for my low deck dart 1970 drag car project because I was not ever going to be happy with the 25 inch tall tires and fenderwell headers. I ended up purchasing a set of 28×4.5 Hoosiers because I look at the hemi cars and love their look tall tires in...

I have a low deck with trickflow 240 heads, I have the milodon super stock external pick up oil pan. (Single line) I read on TTI website a list of pans that they know of that works with those headers and my pan isn't listed. I look at the headers and see no reason why they wouldn't work. Anyone...

I'm looking for a fiberglass hood, bumpers, valance, fenders. Would like a six pack or super stock scoop type. For 70-72 dart demon. Thank you kindly.

I have my 470 on the Dyno. 3.915 stroke 4.375 bore. 11.4:1 compression. Howard's solid flat tappet 260-264 @.050 .656-.660 on 108 lsa 104 icl Trickflow 240s with 1.6 Harland sharp rockers. Trickflow track heat intake (4150) Blp 850 with 16 hole annular boosters. Msd pro-billet distributor &...