Search results for query: *

PM also sent

PM sent

Looking to buy a smallblock K frame for a 72 Dodge Demon. I’m also looking to get upper and lower control arms. Let me know if you’ve got anything. Thanks!

Hey guys, I’ve got a 72 Demon with a 360 in it I’m working on. I’ve owned the car for 4 years now and this has never been a problem up until 2 months ago. I first noticed the battery (duralast) was leaking battery acid out the top ports where you would top the water off, which tipped me off to...

Hey, I was just wondering if anyone has a picture of the location of the drivers side mirror controller knob in a 72 A body. I’ve got a 72 Demon that I installed sport mirrors on with the interior controller, but just want to make sure I have the proper location before I cut the mounting hole...

Shooting you a PM. Thanks!

Those are them! The lower ones in the picture look to be what it was, if Im remembering correctly. Ill definitely be needing one. Long shot here, but anyone going to Carlisle next Friday that has an extra? Thanks again for all the quick responses and help!

I was wondering if anyone knows exactly what this piece is, and where I could find another? I have a set of sport mirrors on my 1972 Demon, and the drivers side has the control lines to adjust the mirror from the interior of the car. I have misplaced the washer that locks the controller in...

Oh wow, no way. Alright cool, I’m gonna go look even harder to see if it’s down there hanging out. Thanks again for all the work!

I definitely appreciate all the help here, thank you all. I went through the harness again and did not find a bullet connection anywhere for the blinker to plug into. If I were to tap into the wire for the actual blinker on the side of the fender, how would I go about that? Is it as simple as...

Yeah, so I did trace that wire back and didn’t see any pig tails for it to connect in to. I’ll keep looking but I don’t think there is one. I’ll have to look into how to tap into the side marker lights to get them tied in.

I was just wondering if anyone could lend a bit of knowledge and has a picture or can describe where the fender top blinkers connect to in the wiring harness? I can’t seem to find a female connector for them loosely laying around anywhere in the front of the car. Thanks!

Okay I will look into amd and then also call tri city plating. I figured I’d ask around the forum before sinking a bunch into the bumpers just in case someone had a set laying around. Thanks!

They do have jack slots, but no longer have the bumperets on them.

I’m looking for a set of chrome bumpers for a 72 Dodge Demon. I’m looking for a very high quality pair. Thanks.

So I’ve already purchased two reverse light sockets and they look similar to the one posted here. They both seem to have a negative wire running from them. I was aware they ground to the housing, but maybe it’s an extra ground wire for good measure? I’ve had issues with my original tail light...

I need to install new reverse light sockets in my 72 Demon, as they weren’t there when I bought the car. I have a random unconnected wire coming from the loom that houses the wiring harness for the tail lights that I’m assuming is the hot wire for the reverse socket but I will need to check to...

Hey there. Does anyone know if there is a way to tighten the rear window latches in a 72 demon? Mine tend to flop closed at cruising speed. Thanks!

I need to replace the front pump assembly in my 727 that is backed up to a 360 in my Demon. I have a spare small block 727 at a friends house I plan on using as a donor, however the transmission shop is saying there was a difference in bushing sizes in different years. He seems to recall that it...

Yeah so one of my flasher units was reverse polarity so I made short little jumpers to swap them properly and the blinkers worked great afterwards The hazards still only flashed bright and stayed on

Okay Ill give that a shot swapping those bulbs back in there. It is a 1972 Dodge Demon.

So I do have LED tail lights in there, however the front bulbs are incandescent. My blinkers suffered from hyper flash while using a traditional flasher unit. I swapped both flasher units (blinkers and hazards) to LED flasher units. The blinkers work as they should now, and no longer suffer from...

I was looking for ideas on what could be causing my troubles. My blinkers work fine, but my hazards when activated flash bright, but stay bright and wont flash. Ive tried different types of flasher units, LED and regular bulbs, however I cant seem to get them to work. Ive looked in the service...

Yeah if I can use the current converter I will for sure. He’s taking the transmission apart on Tuesday so I’ll see what he comes back with to report on. Either way, I’m keeping this converter and will send it out to get rehabbed and will use it in a 727 rebuild I’d like to do on another trans...

Well so my transmission is getting rebuilt, and the shop says he won’t buy a stall convertor to put in it bc then he’d be liable if it blows up and “they just don’t build no good ones anymore”. He’ll install it, just won’t buy it. Previous owner has a 2,800-3000 hughs convertor in there. Does...

I was able to get it up the driveway and on to ramps. I’m gonna get it on a lift, take the trans out and look at the front seal and see if it went bad. I have one of those lokar kickdown cables that I find tricky to tune, and I possibly may have been putting to much pressure on it and caused it...

That’s great. Thank you!

My 727 blew up yesterday, gushing pink opaque trans fluid out the bottom of the bell house. That’s outside my scope of repairs, so I’ll have to get it rebuilt, or even replaced if it will be easier on me. With all that being said, I have ALWAYS wanted a 4 speed. I’m wondering if there are any...

Apologies, it’s a 72 Dodge Demon. I had to leave it in the driveway but I’ll try to check it out later when I get home. I know sometimes things can just go bad and wear out, but the only thing I’ve messed with is the flasher unit. I haven’t touched anything electrical on the column, head light...

Hey all, this is a new problem for my car. My brake lights and dome light fuse keep blowing. It’s not an instantaneous thing, but I’ll get a couple miles and they’ll blow. Does anyone know of a common issue that may be causing this?? Only recent change I’ve made was I put an LED flasher unit in...