Search results for query: *

What is the best way to remove the Woodgrain Decal on the Plastic Instrument Bezel? I don't want to damage it. Just want to get the Decal and the old factory paint off of it.

I'm looking for the large body plugs that go in the holes in the rear seat pan for my Duster. I have purchased 2 different A Body Body Plug Kits and neither kit contain these large plugs. Are they available as individual plugs?

Trying to purchase parts from people on Craigslist or Facebook marketplace is so difficult. You can't get them to respond but adds say if add is up part is still for sale. Even when you can get someone to respond and setup a day and time to go to purchase the parts you can't get them to give...

How many of you have the Eastwood Mig 175 welder? Mine is acting up and I was wondering if someone else has had the same issue. The wire spool that goes on the shaft inside the machine is tightening up against the wing nut preventing the spool from turning. I can't figure out why this is...

I'm working on fixing the bent up rocker panels on my 75 Duster. I've started on the right side first. I'm wondering if these are drain holes

Only took 4 months to get it to where I can work on the cars now

75 Plymouth Duster rear seat top and bottom for sale 100.00 plus shipping

These bucket seats with tracks were out of my Green 75 Duster. I have no idea what they are originally out of. $80.00 Plus shipping.

Since the wiring harness in my Green 75 Duster is so hacked up I'm going to pull the one out of my parts car. Both cars were /6 factory A/C cars. However the Green car had a small block in it when I got it with a destroyed wiring harness. Since the parts car wiring has all the plugs and...

How the heck do I remove a wire from this connector. The wire I am trying to remove is one of the wires that runs through the Grommet top left of firewall on my 75 Duster It is the blue one Thanks

Are the metal dash frames the same between the Dusters, Valiants, and Swingers. Reason I ask is because the metal dash frame is hacked up around the radio area on my 75 Duster and was wondering if the dashes from these other cars will work. This way I won't have to limit my search to just the...

I'm trying to remove the dash pad from the metal frame on my 75 Duster but I see no studs or nuts Does it just pull off? When I removed the dash pad on my 72 Coronet there were nuts and a couple of brackets to remove. I just don't see any on this dash pad

I'm drilling the spot welds in the floor of my 75 Duster. The front passenger side the indents are there but the drivers side I cannot find any spot weld indents The only ones I see on the drivers side is above the floor seam to firewall gap on the firewall. AM I blind I see I have to drill...

Did the A Body mopars with a factory A/C setup have 26 inch radiators regardless of /6 or V8 engines? Reason I ask is because I'm researching fan shrouds. I will need one eventually for my 75 Duster. Car came with a /6 from the factory with factory A/C. I haven't been able to find re...

Any of you go out and work on your cars when you can't sleep. Or wake up in the middle of the night and are wide awake and can't go back to sleep. Am I the only one? It's 2 am and I just removed the drivers seat that was in the car when I got it and removed the rest of the carpet.

Would 320 grit sand paper be too rough to scuff up the coating on the panel for primer and paint Thanks

Are the steering/pitman arms on /6 and V8 cars the same? Since I will be replacing the /6 K frame to a small block one on my 75 Duster I want to make sure I get the right one. I will be using Moog parts. Thanks

Is the sheetmetal that Eastwood sells AMD stuff? They have free shipping on orders over 99 dollars. I would like to get a floor pan for my 75 Duster. Thanks

Are they a good company to deal with? performanceinjectionequipment

I have my 84 Plymouth Gran Fury with a 318. The thermostat housing is leaking. The book I have says install the thermostat then put the gasket over top the thermostat then install the housing. Is that right? It seams that if I did it that way it would leak since the gasket won't lay flat...

On the AMD site the Duster floor pans go from 70 to 74 On the Eastwood site the AMD pans go from 70 to 76. Is the only difference the cat indents

A little dusty got to clean them

Year one as the wiring harnesses for A bodies up to 74 Has anyone used these kits for 75 and 76 cars? I would like to run a little bit larger ALT and a AM FM radio. A simple radio will do. I know that 74 cars had seat belt interlock. Can those plugs be taped off? This is for my 75 Duster...

I couldn't figure out how to update the price on my old add so I'm relisting it This rear seat is out of a 75 Plymouth Duster $110.00 plus shipping Hudson Florida

Who do you guys get your interior paints from for the metal and plastic parts of the interiors of our cars? I can find the reds the blues and black. I can't find green. This is for my 75 Duster interior paint code is A1G6 Thanks

Are the radiators the same size for A/C A bodies vs non A/C cars. My 75 Duster has an aftermarket plastic tank radiator. It must have been installed when the previous owner removed the /6 and replaced it with a 318. Car had A/C Will be adding A/C back to car in the future. I would like to...

Is there a difference between the 1974 and 1975 Plymouth Duster positive battery cables. I can find ones for a 74 but not a 75

Has anyone used these? How do they compare to the mechanical ones? I want to get rid of the one with the oil line that is in the Duster now. 2-1/16" OIL PRESSURE, 0-100 PSI, AIR-CORE, ULTRA-LITE

I have a Edelbrock 4 barrel intake on order for my 75 Duster with a 1989 318 in it. What thermostat housing with gasket do you guys/girls recommend to use?

I have my 1984 Plymouth Gran Fury project car for sale on CL. I received a response on it so I answered back and this is the reply I got back Thanks for getting back to me, I'm satisfied with the price and the condition on the list, kindly withdraw the advert from list and considered it sold...