Search results for query: *

  1. hotrod swinger

    [Found!] 273 air cleaner with CAP fitting

    Any condition will do.
  2. hotrod swinger

    [Found!] Dutra duals

    Looking for a set of Dutra duals. Thanks!
  3. hotrod swinger

    Alternator not charging

    Went for a Sunday drive today, came home, tried to fire up again and the battery was dead. Threw in a good battery, car started, alternator not charging. Tested alternator full field, still no charge. Checked the brushes and one of the little springs was broken. New brush and away we go...
  4. hotrod swinger

    No more ethanol free gas in Canada?

    Just heard about this the other day, what a drag. Are there any reliable additives available to counteract the problems that ethanol causes in carbs?
  5. hotrod swinger

    Off idle hesitation - solved

    1966 Signet 170 slant six Stromberg WW3 carb Vacuum is a steady 17 Initial timing 7 degrees Idling at 750 in neutral No vacuum leaks I can see Idle mixture screws adjusted properly Accelerator pump functioning properly I’ve tried advancing the timing, I’ve tried adjusting the idle mixture...
  6. hotrod swinger

    [WANTED] Hood for 1966 Dart Gt

    When my hood was sandblasted they put a dip in the ridge along the middle, can’t be repaired. Looking for a nice replacement. Thanks!
  7. hotrod swinger

    Adjust valve lash on unknown cam

    Slant six engine with unknown cam. It seems to perform like a stock engine, by no means a lopey or choppy idle. How do I adjust the valve lash without knowing the specs of the cam? Should I assume stock and just go with 10 intake and 20 exhaust? Thanks!
  8. hotrod swinger

    1966 dart gt carpet hold downs

    Just wondering if these are available. Thanks!
  9. hotrod swinger

    1966 Dart Gt hood trim install help

    The trim on the front of my hood came off and I don’t know how to reinstall the trim and spring clips. Anyone able to walk me through it? Thanks!
  10. hotrod swinger

    Part number for 66 Valiant rear wheel bearings

    I’m hoping somebody can point me to a part number for rear wheel bearings for my 66. It has 7.25 rear end. Thanks in advance.
  11. hotrod swinger

    Soak breather in oil?

    Do these breathers with a cloth filter get soaked in oil or just the ones with steel mesh? Did my best to get a nice background shot of the engine as well.
  12. hotrod swinger

    Looking for tune up tips stock 170

    Initial timing 17 Total timing 36 Vacuum at idle 17 Vacuum at 2600 19 Idle in gear 580 Idle in neutral 800
  13. hotrod swinger

    Installing side weather stripping

    1966 Dart GT My car didn't come with weather stripping above the side windows and doors. What do I buy and how is it installed? Are there clips or other items I require for this install?
  14. hotrod swinger

    Windshield trim

    For a 1966 Dart GT. I did a search but I couldn't find the answer. Are there clips that need to be installed for windshield trim?
  15. hotrod swinger

    Vacuuum is 15 at idle

    Just checking to see if this is a good reading. Needle is steady. 170 fresh stock rebuild Two barrel carb 2.5 exhaust Thanks!
  16. hotrod swinger

    Just wanted to show off my slant six…

    I installed the Bouchillon transmission linkage over the weekend and I couldn’t be happier: Also since my heater isn’t working I disconnected the heater hoses to show off the valve cover: That’s all for now, out for a cruise. All I need is a sweater lol
  17. hotrod swinger

    Power steering belt tension

    I can’t figure out the best way to increase the tension on my power steering belt on the 66 Valiant. The 73 Dart is easy, there is a visible 1/2 inch socket connector. Not on the 66. It looks like an older style. I tried to search before posting. Thanks!
  18. hotrod swinger

    Pictures of Bouchillon with two barrel carb

    I'm looking for pictures from anybody who has attached the Bouchillon kickdown cable kit and accelerator cable to a two barrel carb. I'll eventually be using a Bendix Stromberg WW3 and I currently have a Carter BBD. Just looking for ideas. Thanks!
  19. hotrod swinger

    Accelerator pump part number

    What is the part number for an accelerator pump for a Carter BBD No. C-6088?
  20. hotrod swinger

    Where to buy carb

    I’m looking for tips about the best source to buy rebuilt carbs. A Carter BBD to be precise. Thanks!
  21. hotrod swinger

    [WANTED] 7 1/4 rear diff cover

    1966 Valiant I’ve been browsing the internet trying to find one for sale, no luck.
  22. hotrod swinger

    FABO stickers

    Just wondering if there is such a thing. I’ve gotten a lot of help from the site and I would put a sticker on my quarter window
  23. hotrod swinger

    [WANTED] Moog Pitman Arm K7020

    For my 66 Valiant Signet
  24. hotrod swinger

    Correct Pittman arm for 1966 Dart GT

    I am looking for the Moog part number for my Pittman arm. 66 Dart Gt with factory power steering. Thanks!
  25. hotrod swinger

    [WANTED] Electric windshield washer pump

    For 1973 swinger
  26. hotrod swinger

    904 transmission fluid level

    Does it matter if the fluid shows half an inch above the full line? No leaks present, no other issues.
  27. hotrod swinger

    [WANTED] Grommet for washer bottle

    1973 Dart The grommet that seals the bottle at the electric pump is knackered. Anybody have one for me?
  28. hotrod swinger

    Tool for making clean ground connections

    In another thread I saw a member comment on a tool you use with your drill to make nice clean ground connections instead of scraping the paint with a screwdriver. Can’t remember what it was called and can’t find one online. Can anybody point me in the right direction?
  29. hotrod swinger

    [WANTED] Throttle linkage for slant six two barrel carb

    Looking for factory “super six” throttle linkage. I am willing to pay. Thanks.
  30. hotrod swinger

    Low voltage problem

    1973 Dart Swinger, basically factory wiring. Noticed low voltage while driving, a few minutes later voltmeter stays at 12.5, no charge. Verified with multimeter. I have battery voltage at the alternator stud. I removed the green wire from the alternator and grounded the field connection...
Back
Top