Search results for query: *

My rig is 72 with a 73k. No sway bar. Looking for recomndation on all in kit for front and rear sway bar. My LCA do not have brackets so im gonna need tabs to weld on. I dont want anything that will make it ride rough its a cruiser.. right now its gettng too much flex and im getting lotta wheel...

After pissing and moaning and swearing and f*ng with the ball flange and using muffler cement and ultra-copper and pulling the manifold and replacing the exhaust gaskets several times. I realized that the factory mustve put holes in the manifold to lube heat riser valve. I thought i was being...

You prob know more about them than i do. I dont even think they are a-body but i was gonna use them and i decided to go different way. New in box. ONe has super small blem that was on there when i got it. New in box. Includes bolts for each $125 shipped. Thanks

Anyone running high end audio? Im not talking competition grade but at least 1000w Whats the alternator of choice . Currently my 60 amp stock is fine at cruise but i need more juice at idle Choices are denso/gm/tuff stuff mopar. Most of what ive read so far are inconclusive. Also. Im not...

I juat replaced front & rear glass and figured id post up the pics of where the clips are. Fyi when possible use any factory clips u can over aftermarket. Especially on the front a-0pillars. The aftermarket ones were way less springy.. Fromt mArked with yellow Rear in red

72 dart swinger with faxtory 73 bbp front disc. I just got wheels from summit and its tight!! Im thinking 1/8 inch between the wheel and the cAliper A.R outlaw 14x7 Do I? A: call it good B: clerance the caliper C: re think using 14” wheels Anyone runnjng this combo? Thanks

im floundering here What i have is a 73 dart 318 that has been converted from 4 post ballast to 2 post balast. While cleaning up the harness. I mustve rewired something incorrectly and now i have no power to coil in “run” position. The brown wire which i thought was “run” power only gives...

New floorpan and rug. I hate to put these monstrocities back in. They work but hideous.. Anyone found somthing that looks good and works. Front only / Lap only. Aftermarket bucket seats. 72 dart swinger hardtop Retractor would be nice. Thanks

Can someone post a picture of the placement of the headlight high beam switch that's next to the kick. Trying to get it in the factory position after floor replacement. I could only find a post about b-body and in that instance. It is locTed right below the pinch weld. However that seems low to...

Pulled out of what i think is 904. Mated to 73 318. What do these markings mean? Looks to be non factory fresh Im Re-using the converter..just curious

can someone tell me how to Hotwire a 318 so i can run it on a stand. . Its 73 so it has mopar orange box and 2 post balast. I rebuilt it in my garage and i dont want to put it in and risk scratching my freshly painted engine bay just to watch it self destruct. Its prob fine but i have it in a...

pickup only Mansfield mass

Re posting because i posted in the wrong section. I know someone is holding… Im Looking for the long bolt with the shoulder and nut that goes all the way through the mount. Some jackass boogered the threads on mine. Only need one Thanks

Looking for the long bolt with the shoulder and nut that goes all the way through the mount. Some jackass boogered the threads on mine. Only need one Thanks

Ive been over them with a fine tooth comb. No markings Need appx year / make / model To me they look 2000 ish pontiac But i cant confirm exaclty Thanks for any help

Stock balancer. Just want to confirm that it hasn't spun. Timing mark is a smidge left of 12’ o clock using the keyway as the 12’0 clock position. Looking from front of motor. Thanks

Found in a free pile.

Stock 73 318 with #2843675 heads. Has edelbrock performer and running felpro 1243 intake gaskets. IntKe and gasket do not come up high enough to cover this Crescent shaped port and it looks wet inside. Thoughts?

Might be same as 71.. not sure. $5 for the pair plus flat rate shipping Check or Money order only No venmo, Bitcoin or paypal Test ur metalwork skills Thanks

Mine has 2 holes. All the ones ive seen have 4 posts so idk.. i got the lid from desert valley and it i could see the outline of a script badge washed i to the faded paint. Thanks Mike

I removed my battery tray because it was rusted to **** along with the inner fender underneath..so i got a new tray and support from amd and repaired the rust but now ive replace so much of the fender with new metal that the holes are gone and i can’t figure how to mount it. Ive attached a color...

Having difficult time finding a front bumper for a 72 swinger. I can re chrome mine as an option but amd makes a 70-71 repop part # 100-2070. Anyone know if this will fit? I dont care about Jack holes or no Jack holes. I just want good chrome. Thanks in advance

Looked like a fair deal. Way cleaner than my rust . Not even sure if this is FABO legal, not mine just passing along the info. Rhode island https://providence.craigslist.org/cto/d/warwick-1973-plymouth-duster-340/7547450028.html

$ 50 shipped Thanks Check or m.o. only

$ 50 shipped Thanks Check or m.o. only

Does front torque boxes tie into the floor pan? Mine are just welded to front frame and to front inner rocker. I can’t tell if it was welded to the floor on the front of the torque box or the rear of the torque box or both. I’m replacing the floor pan and want to make it right. Factory torque...

Old out. New in and using amd floor on 72 swinger . Fits ok on back and sides.. except the Front flange where it meets the lower firewall. Half inch gap at some spots. Woof!!! Do i just cut the entire front flange off and channel it? Or beat it into submission.. What have others done?

These guys. Must be in decent shape with the plastics not shredded. Must be black. I really only need driver side but will take a pair. Shipped to 02048 Thanks

In my 72 dart. converted from bench to aftermarket buckets before i got It. They dont look a-body to me but i’m a journeyman. Thanks

Hey all Replacing rear crossmember (see photo) and when ordering from AMD. There is a note that the crossmember “extensions” are not included.. for the life of me i dont see any extensions on my car. Perhaps They rusted off long ago. I just dont want to waste fifty bucks if they are not needed...