Search results for query: *

Morning all, I have a brand new Speedmaster PCE261.1084.01 1.5 ratio bushed stainless steel rocker arm kit along with a set of Brian Tooley Racing .080” wall pushrods. I bought the kit new a couple years back, never installed them on my 340. Opened the box, looked everything over and put it on...

Sold sold sold to @abodyjoe Afternoon all, I have this edelbrock 1406 that’s been living on the shelf for years. Came from a buddy, I’ll never use it. $50.00 plus usps medium flat rate to you. Payment PayPal preferred sent friends and family. Thanks, Cliff Ramsdell

Sold sold sold to @ragtopfury Afternoon all, I have an edelbrock 1405 has had an electric choke added along with Mopar linkage. This was on my 1968 GTS when it came home, I pulled it and installed an AVS. Nice carb just need a new home. $100.00 plus shipping usps medium flat rate box insured...

Sold sold sold to @JTB Afternoon all, I have a booster, brackets and all other related parts that I pulled off my GTS. Car was converted from drum to disk brakes at some point before it came home to me. Pulled the booster and dropped the MC bore size for better pedal performance. $125.00...

Hope this is fine here. Want to make a deal to swap my new Highway 61 blue Hemi dart number 50422 for another 1/18 scale 1968 340 4 speed GTS. Now that my old GTS came back home I would like a model close to the car. There have been some other metal 1/18 scale GTS models out there. So, pm me...

Morning all, I have a camshaft package that I removed from my 340 at rebuild. A bit more cam that was needed for a completely stock car. Broken in and ready to run. Cam and lifters, springs, retainers, keepers, double row timing chain set and brand new cloyes tensioner (bolted in, never run)...

Hi all, I search high and low and no real feedback on the installation of this shifter so I’ll do a little write up with some details, pictures and data. The car is my 1968 GTS, it’s a restored matching numbers car and while I love the car that way I’m good with hidden upgrades like the...

Morning all, I have a new, never run 1968 carter AVS carburetor. This is for all 383 automatic applications, A, B and C bodies per the parts book. Mopar part number 2863801 4401S D8 date code and the tag is stamped 1218, which puts is right at the end of April 1968. I bought this for my 68 GTS...

After a successful trip down and back to Carlisle with 800 plus miles under our belt with no issues I find out that Monday that the windshield was leaking pretty bad during our last 100 plus miles home. No biggie, pull the seats, console and carpet, dry it all out. Call the glass guy and wait...

Morning all, I’m looking for the two metal clips that are on the passenger side of the radiator. If you have an old radiator side strap or such I could use these for my GTS. Thanks, Cliff Ramsdell

Hi all, Cleaning up for spring and I have the following for sale. Speedmaster PCE261.1084.03 stainless 1.5 roller rocker arm set. Came from a fellow list member, traded for a set of 1.6’s. Still in the box. A new set of PRW 1203188 ball type rocker arm adjusters, bought, never used by my son...

Hi all, I’m gonna take another try at this. This is a 340/360 dual plane intake that’s a copy of the 1968 to 1970 340 intake manifold. I would like one for the car so if you have one you would part with message me and let’s see what we can do. I’ll attach a picture of what I’m looking for...

Sold sold sold, thanks Gary. Morning all, I have a 71 to 74 B Body pistol grip shifter assembly. Handle and shifter box. These have been living on the shelf for 35 plus years and won’t find their way into a project I’m working on. These are a nice, driver quality part and would clean up...

Hi all, I have a stock 64/65 A body 4 speed shifter. Body has 2083 on it and the reverse lever has 2336. Has the reverse linkage still on it. As removed and sitting on the shelf for years. $75.00 plus shipping PayPal payment preferred sent friends and family. Thanks, Cliff Ramsdell

Sold sold sold. Price Drop.. Hi all, I have a used LD4B intake, Chrysler part number 2836139 cast into it. This intake is a well worn and used and has been stored in its last as used condition. I’m not cleaning it so you can see how it was off a running car. It has a crack up the back of...

Morning all, I have a 71 to 74 B Body pistol grip shifter assembly. Handle and shifter box. These have been living on the shelf for 35 plus years and won’t find their way into a project I’m working on. These are a nice, driver quality part and would clean up nicely. No number on the handle but...

Afternoon all, I’m looking for a correct AVS carb for my ‘68 GTS. Car has a November 10th build date so I’m interested in a September and earlier AVS. October could work also according to Scott @ Harm’s. The more complete the better, tag, all the linkages, dash pot, bracket and arm. Please...

Building a transmission today and some ham fisted idiot who, no doubt does not own a torque wrench, had stripped out a few bolt holes in the transmission case. Two, piece of cake, the third was in a spot that you can’t drill out. In the back of the left bottom box, 4th drawer from the bottom...

Hi all, Found this today on Oreilly auto parts. Go to the website https://www.oreillyauto.com/. and search for item 121g. Can’t get it right now but I bookmarked it for a future project. Cliff Ramsdell

Morning all, I have a set of the W18 Simulated mag wheel covers, Mopar part number 2944092. These came from an early 1970 340 swinger years ago and I got them from a guy with a mod top 1969 Swinger. These have the 1968 part number cast into the center piece 2881765. I’m guessing it’s the same...

Sent to me today, the title was the hook and while I don’t agree it was a bit humorous to read. The Dodge Dart GTS 440 Was So Dangerous It Made A Corvair Look Like A Volvo | Carscoops Cliff Ramsdell

Hi all, Looking for parts to make my jack and hold down setup complete, here’s what I need. Jack handle/lug wrench. The correct A body one. The spring to hold the jack in place. The spring “loop” that’s welded to the floor. The correct spare tire long hold down stud, I think it’s 8 1/2”...

Morning all, I have a nice CH4B intake. It came with a carb mounted to it and the carb is what I wanted, package deal though. Cleaned it up in my glass bead cabinet, looks like it had a clear coat of some sort on it back in the day. Has some small spots that wouldn’t come off. $250.00 plus...

Morning all, I have a set of 5 simulated mag wheel covers for the 1968 to early 1970 A bodies and some of the 1968 & 1969 B bodies. 4 covers are the black 1969 and 1970 style and one is the silver 1968 style. These are pretty decent, all nut caps are intact and the caps have normal curb rash...

Morning all, I have a nice, stock 340 4 speed balancer from my 68 GTS. Upgraded during the rebuild and don’t need the stock one. Correct 68/69 340 P/N 2658458 balancer, timing mark on the passenger side of the motor. Rubber is in nice shape. $100.00 shipped USPS flat rate in the lower 48...

Hi all, Getting a set of the simulated mag wheel covers set for my GTS sorted out and I want to repaint them. Some are the black 69/70 W18 covers and a couple are the 68 gray covers. Does anyone know the color for the covers? Thanks, Cliff Ramsdell

Hi all, I have this transmission and it’s completely rebuilt, new bearings, seals, brass rings. 100 percent disassemble, washed and inspected. New front bearing retainer. Reassembled and ready to install. 26 spline input shaft, 32 spline large (same as a turbo 400) output shaft. This...

Morning all, I want to take a moment an give a shout out to Ray, @halifaxhops for his work on my 68 340 dual point distributor. Sent Ray the distributor with the breaker plate out. Lube, ground strap, NORS points, cap and rotor and NOS Mopar condenser. Assembled and spun up, ready to install...

Morning all, Just putting this out there for all of you Connecticut and western mass members. Tonight is the opening night of Marks Cruise night, all cars welcome. Opening Night 2021 Cruise Season! Cliff Ramsdell

Afternoon all, I have some spare Mopar OEM valve cover PCV grommets. Mopar 3751510. $8.00 plus shipping ($1.50 or so.) Thanks, Cliff Ramsdell