Search results for query: *

So I am trying to run down an issue with my '71 Duster 340 4-speed. The problem is that the aftermarket original-looking rallye tach jumps quite a bit at high RPMs. It seems accurate at idle and low speeds, but whenever I get on it, it's all over the place. It will usually settle down at the...

Very reluctantly listing it for sale and only because I have two other Mopars and not enough room to comfortably store them all over the Michigan winters. If a numbers-matching trailer queen is what you want, then you are going to want to keep looking. If you want a head-turning, reliable, and...

I wanted to replace my stock IVR with a safe and reliable solid state IVR, but didn't want to pay $50 or more for a pre-made unit. So I built my own. Since I needed to order multiples of the required parts, I made several of them. I am an EMC Engineer by trade, so I thought maybe I could save...

Cleaning house. I bought this along with a cluster assembly to keep as a spare. I don't think I'll end up needing it, but I have no problem keeping it on the shelf either. If you need one, it looks complete to me with the exception of the flasher circuit, which was cut. All I ended up with was...

Original bench seat out of a '67 Barracuda Formula S. Will fit a variety of other A bodies. Mint condition white covers and perfectly working tracks. The interior was professionally done by Okoboji Classic Cars in 2015 by a previous owner. I swapped to buckets and have finally decided I'm not...

Just wanted to give a quick shout out about someone new to FABO, but who is also an established parts seller who I've recently had pleasant dealings with, @littleredcoffin. I was a little skeptical at first because of the newbie status and that he'll only accept postal money orders, and if I'm...

I have a '72 Duster 360/905/8.75" 3.55 sure grip. I just finished doing a power steering upgrade from the factory box to a Borgeson box. I also swapped the factory front drums to disc with the Dr. Diff kit. I'm currently waiting (forever it seems like) to get it aligned before I can actually...

**UPDATE** Steering box and PS pump are gone. Still have the drums, spindles, and master cylinder. Make me an offer if you can use them. I want to try to find a home for this stuff rather than pitch it. All in good condition and working when removed. I upgraded my ‘72 Duster to front discs and a...

Does anyone have or could take a picture(s) of a stock 360 LA alternator bracket setup? The car ('72 Duster, originally a slant 6) does not have A/C, but does have power steering. My phone crashed and lost all of the pre-disassembly pics I took. I’m trying to work out how it all goes back...

I’m getting ready to put my 360 LA back together after a front end tear down to do the water pump and timing set. The fan on the left is the one that was on the (relatively new to me) car. The one on the right has one more blade (came off a ‘67 273) and will fit. Seems to me 6 blades are better...

I bought a '72 Duster a few weeks ago and one of the first things on my list to take care of was the power steering. It goes down the road nice and straight, but it felt choppy, for the lack of a better description, when returning to center from either direction after making a turn. It did not...

The original question was deleted because I can’t delete the thread. Just got tired of all the unnecessary negativity. Thanks to those who replied below with helpful info.

I have what may be a stupid question, but I'm relatively new to owning a 4-speed classic. I know my way around the engine compartment, but the A-833 is a new experience for me. I bought an original 67 Barracuda Fastback 383S 4-speed a little less than a year ago. It came to me with the original...

It came out of a '67 Barracuda Fastback, but should work for many applications. Tested good prior to removal. $75 picked up or plus shipping from Spring Lake, MI 49456. Alternate contact: 2ndgenbarracudaparts@gmail.com

I was super bored yesterday wondering if winter will ever end. So I messed around with some different wheel/tire combos I've collected over the past several months but not yet tried on. I'm not really looking to rank the looks because I'm keeping all of them. I want to be able to change up it up...

Completely reconditioned original A-body gauge cluster assembly. It came from a 1967 Barracuda, but it should work in a number of other A bodies. Selling complete. Not interested in parting out. Does not come with the bezel. I am still working on restoring that. Features: -Professionally...

Original vacuum gauge out of a '67 Barracuda. It worked well when removed from the car. $125 picked up or plus shipping from Spring Lake, MI 49456. Will fit in a medium flat rate box ($15.05). Alternate contact: 2ndgenbarracudaparts@gmail.com

Came out of a '68 Barracuda. Has the clip-on cable connector (not threaded). If you have the earlier threaded connector, you will need to swap the cable. Does not have the trip meter. It worked well when removed from the car. $125 picked up or plus shipping from Spring Lake, MI 49456. Will fit...

In good condition and operate smoothly. Everything you see in the pics is included. $40 each, picked up or plus shipping from Spring Lake, MI 49456. Alternate contact: 2ndgenbarracudaparts@gmail.com Driver Side: Passenger:

This came off a '67 Fastback. Very solid. No dents or dings. One small area of flaked paint on the driver side edge. Minor surface rust on the underside that should clean up easily. Structurally sound and ready for prep and paint. $250 picked up or you arrange shipping from Spring Lake, MI...

Driver and passenger sets. These came off a 1967 Barracuda Fastback, but may work in other A body applications. All are straight and operate smoothly. Solid with only minor surface rust that will clean up easily for paint. $25 per pair or $40 for all, picked up or plus shipping from Spring...

For sale as pictured. In very good condition - solid with no rust holes. Skins only have minor surface issues that will clean up easily prior to paint. The doors have been partially parted but are currently available with most of the hardware intact. What's missing: driver exterior mirror, vent...

Two identical pair. One pair is out of a '67 Barracuda Notchback, the other pair out of a '67 Fastback, but these should work for multiple applications. Take your pick. All are in good condition and operate smoothly. $35 each (not per pair) picked up or plus shipping from Spring Lake, MI 49456...

These came out of a '67 Barracuda Fastback but should fit many applications. Only one is pictured but selling as a pair. Decent driver quality that could easily be cleaned up and painted. $15 for the pair picked up up or plus shipping from Spring Lake, MI 49456. Alternate contact: 2ndgen...

This came out of a brown '67 Notch with the copper interior. Could be easily painted another color. Good condition with no cracks or scratches. $35 picked up or plus shipping from Spring Lake, MI 49456. Alternate contact: 2ndgen barracudaparts@gmail.com

These came out of a '67 Notch with the copper interior. Could be cleaned up and painted another color. Right side is missing some fins. Selling as a set, but I've priced it as essentially buy one get one. $25 for the pair picked up or plus shipping from Spring Lake, MI 49456. Alternate contact...

Lines the rear edge of the driver door glass. Chrome is excellent and the piece is not bent or distorted. $25 picked up or shipped from Spring Lake, MI 49456. Alternate contact: 2ndgenbarracudaparts@gmail.com

I am only posting these because original assemblies are so rare and I didn't want to throw them away in case someone might be able to use some or all of it. They came off Midwest rust bucket cars and the winters were not kind to them. This is everything that survived. All the housings are...

This original part came out of a 1967 Barracuda Notchback 273 automatic but should fit many applications. In good condition and pretty much ready for paint with a little more clean up. $75 picked up or plus shipping from Spring Lake, MI 49456. Alternate contact: 2ndgenbarracudaparts@gmail.com

This came off a Barracuda Notchback, but should fit a number other body styles and model years. The bracket is a little crusty but it still works and the socket/connector seem solid. $25 picked up or plus shipping from Spring Lake, MI 49456.