Search results for query: *

Will you ship to Australia Tried to send you a message but it keeps telling me your mailbox is full Rob

Thanks

Thanks mate greatly appreciated Just wondering would the rear screen be different or use the same layout as the front except for the lower edge

I have ordered some new ones from DMT so I will see what the difference is but even though they could be the wrong clip I still thought the top of the clip would still be mounted flush with the Cowell panel

I don't know first time I've come across these I am used to the plastic lock strip we have in our early valiant in Australia

Hi All Need some advise My 67 Valant has had the 68 trim and rubbers fitted to the front and rear glass I have never been happy with the way the trim sits and is all way popping out. I have removed the screens for a respray and have found some of the clips seem to be sitting high I would have...

Yep she is a 340

Have done a drawing of the measurements of the one I used

That could be it i will do a drawing of the cable and put the measurements in and post for you

Nah she is left hook

Demonracer Unfortunately there was a pile of them with no tags on them and just was told to go my hardest. But the parts guy seems to think it maybe a Honda vf1000 or a Kawasaki cable I have done a bit of research and come up with these numbers worth a look If I find out exactly what it is I...

67 Signet with a 440

Lightest pedal I ever had

After many attempts to get the throttle cable working well due to the angle you have to clear the back off the valve cover. I finally have come up with a solution that works a treat. Went to my local motorcycle shop and went countless cables till I found what I wanted. Have a look at the photos...

No Arron just a flat white enamel

Used 3m green masking tape very low adhesive hobby knife to trim and a magnifying glass on a stand with very steady hands Hand painted the lettering with a number 1 brush And a bloody sore neck

When I used to paint my die cast models that’s what always used for enamel paint I stared with a low temp of around 30c and work up to 80c and keep and eye on it but as long as you keep it under 120c u should be fine over that the plastic can start to go soft

I was playing around with my uv torch It’s a pity you can’t get black Light wedge bulbs for the cluster Looks pretty cool

Unfortunately I don’t have any previous photos but it was not in good shape most of the chrome and paint worn off needles were badly faded Finally finished didn’t come up to bad Chrome paint looks alright not perfect but I’m not restoring to concourse conditions she is a cruiser so I’m pretty...

Needles repainted and instruments clean and checked all good

Bezel bakes in the oven for 30mins at 80c chrome paint nice and hard Masked up ready for the black coat

Plastic prepped with wax and grease remover and sprayed with adhesive enhancer Then the top coat of chrome. Now let it harden for a few days mask up and the do the black

Lord sparky would love to have that luxury of a new one but in Australia you have to deal with what you got I can have it redone over here but at a cost of 1000 so I will try and give it a go myself

You will have to remove all lenses

Yeah mate I am not going to have it done as per the original process but will spray it and mask up and spray the black. I will see how it goes. Had a mate mdo his the same way and it turn out pretty good because you are spraying onto clean plastic

Lord Sparky yes it removes the chrome

Hi Arron I use caustic soda mixed with cold water Just get a plastic container big enough to submerge the bezel Mix the caustic soda at half the mix ratio on the container Let it soak for a good couple of hours or until all the paint is removed Then dip it in a tub of white vinegar to...

I’m giving my instrument cluster resto a go myself Disassembled and paint removed back to bare plastic ready for painting I will keep posting my progress as I go