Search results for query: *

Need a pair of 73 and up A body disc brake spindles. Spindles only. Preferably SoCal to save on shipping. If you got a pair and you’ll be at the spring fling Saturday even better. Let me know price/location. Thanks in advance, Chris.

Nice pair of small block MT valve covers. Need a cleaning but otherwise great shape. Asking 125 plus actual shipping or pickup in SoCal.

So recently I pulled the billet convertor out of my car. Had maybe 20 miles on it over the years. Reason I pulled it is I went with a turbo setup and on the dyno it drove right through the convertor. On the street the few times I drove it, the 2-3 shift there was ZERO rpm change. New convertor...

Anyone got a reasonably priced LA tunnel ram laying around? Preferably in SoCal? Pictures and price if you do, thanks.

Looking for a rear seat for a 70 duster in SoCal. Maybe you got one and you’re heading to fall fling? Have the top half but will buy both halves if necessary. Color not important.

So who runs one? Any setups to avoid? Did you see a reduction in coolant temperature? Main reason I’m looking at an oil cooler is for a reduction in coolant temps. Packaging is an issue with my car but hoping someone can chime in on if it’s worth the effort or not. As always, thanks in advance.

Need a rear seat for my duster (top and bottom) dark blue preferably but I’m not picky, mainly need good frames. Located in 92860 and would like something close. Thanks in advance, Chris.

Are the shifters all physically the same? I’m assuming it’s just the mounting plate/rods/etc that’s different from vehicle to vehicle. Have my eyes on a V gate to stash for my duster and want to make sure before I scoop it up. I know I’ll need the correct mounting plate and rods but thought I’d...

So, long story short I bought this convertor probably 10 years ago(used), shoved it on the shelf and never used it. Looks like CSSX5 but google turned up nothing for me. Can anyone ID the numbers on it? Or point me in a direction to go hopefully. Thanks, Chris.

Weiand SBC intake (I know I know) for sale One sbc Weiand 7508 single plane intake. Great vintage single plane, no stripped threads. Has been lightly glass beaded, needs very little cleaning on gasket surfaces to be ready to bolt on. Really no corrosion in the coolant passages. Asking $150...

Figured I’d start a thread on the most recent purchase. Late December I picked up a 70 duster. Can’t have just one car right? Goal is running/driving tagged and insured for under 2k including buying the car. Day I picked it up. 40 degrees, raining sideways and happy as hell. I was taught...

Fresh off a 70 duster. Uppers, tie rods, spindles everything except the low control arms. Asking $150 picked up in 92860. Make an offer? Not willing to ship or disassemble it all.

Like the title says, need two big bolt pattern 15x4.5 steel wheels. As close to 92860 as possible and as cheap as possible. Surface rust, dirty grimy wheels are fine as long as they’re straight. Thanks in advance.

One pair of 452 heads, had them on a mock up block. Free, or if you want to bring me a 12 pack of Dr Pepper that’ll work too Holding them till Saturday then they go in the scrap bin. Located in 92860.

Selling as a core as I don’t know the history on it. Was told it was low mileage rebuilt but can’t verify it. Convertor was rebuilt, fluid in it still looks cherry red. Asking 175. Located in Norco Ca 92860.

One pair of lower control arms. Need to be rebuilt comes with strut rods and torsion bar adjusters. Free to a good home, if not they go in the scrap pile. Pickup in Southern Ca. 92860.

Like the title says, small block performer intake for sale. Really nice manifold just a little dirty, no witness marks on the bolt holes so may have never been on an engine. Got it in a trade and have no use for it. $150. Located in Southern California. Would prefer not to ship it.

65 casting 440 block. Cleaned and allegedly rough bored .030 and needs final hone. Been sitting for a few years in the bag, I’m not gonna use it ever. Asking $300 but make an offer it’s in the way. Located in Norco Ca 92860.

Fragola PN 602010 still sealed. Bought WAY too much when plumbing my car. About 150 from summit, but mine for 100 plus the ride. Local pickup also welcome. Located in Norco Ca 92860.

Motor mounts off my 69 dart 273 car. Imagine they’d fit 67-72 A bodies. 273 318 maybe 340, correct me if I’m wrong. Gotta start somewhere so asking $150 plus the ride, if you’re local you’re welcome to pick them up. Located in Norco Ca.

Driver quality grill, bezels are….well the pictures show what they are. Grill has a few spots that can use some work, shown in photos. Missing one bracket under the drivers side light, used to run it in my car without issue but found a perfect grill. Asking $200, but as always make an offer...

Pair of weld pro stars, maybe they’re street stars. I’ve had them forever and they were on my car for all of 5 minutes and I wasn’t a fan. 15x5 with 3.5” backspace and 5x4.5 bolt pattern. Tires are in good shape but old. One wheel has counter sunk bolts in it, the other does not. Tried to get...

New(reground) Steve Long Racing cam for big block (specs in photo) and a new set of summit brand lifters (dated 2017 before everything new was junk). Originally was going to use it in my turbo setup and changed directions. Asking 300, make an offer. May consider shipping, buyer would cover...

Need a breather from this valve cover set. Someone out there has to have a breather hiding in their shop/garage. Trying to put an end to my brothers hunt for one/surprise him. If you have one, let me know a price plus shipping to 92860.

Need the trim on a 70 duster that runs above the side windows. Both sides, mounting screws would be a bonus. Pictures and price shipped to 92860 would be great. Photo for reference on where the trim goes

Looking for a breather like in the photo. if you got one, PM me a price. Must be like the one in the photo, similar won’t work.

Looking for a pair of decent cast Holley valve covers for a big block mopar. Obviously don’t want to spend an arm and a leg on them. Closer to Southern California the better. Pictures, price, and shipping to 92860 would be great if you have a set. Thanks in advance, Chris.

One pair of KB hemi valve covers. In decent shape, some minor clearancing done. Has burn down breathers installed. Currently only interested in local pickup. Asking $750, as always, make an offer. If you want any specific photos of them feel free to ask and I'll make it happen. Located in...

So recently (and by accident) I noticed a fair amount of side to side play on the p/s axle. Car has moser axles (theyre old, 2nd hand) took it apart tonight and noticed there's no snap ring on the bearing for the retainer plate to butt up to. Anyone know where I can get the correct snap ring...

Got it on a trade. Was hot tanked and supposedly "rough bored .030" of course, I dont have calipers big enough to measure it. Been sitting bagged in the garage. Block and main caps $450. Located in Norco Ca. 92860. Not interested in shipping or trades. Any questions feel free to ask and I'll do...