Search results for query: *

2008 Keystone Outback 26RLS Fiberglass Exterior – Waxed 2/Year since I’ve owned it, 303 on the roof every 4 to 6 weeks. Stored underground for the winter. 28.10 ft Long 5,350 shipping weight 1650 Carrying Capacity 755 Hitch Weight 10’3” High Outside Speakers 15’ Awnings with No Holes 3...

Happy Birthday you drunk and disorderly crusty old SOB's! Love you Brothers!!! 240 Years of kicking A$$!!!!

I installed 6" Westin Oval Tubes on my 2011 Ram 1500 Crew Cab. They look awesome! But, there is some flex when you step on them. There are 3 brackets that bolt to the factory holes on the back side of the rocker panel. Is this how the factory tubes are mounted? Anyone else have this...

I just got a new 2011 Dodge Ram 1500! The dealer is trying to sell me a detailling package called Master Shield that will included Paint Protection,Interior fabric protection,and Rust Inhibitor and Undercoating. I found a website on it but it really doesn't give much information about...

I put a remanufactured Master Cylinder on my 74 duster and it is leaking out from the gasket. I've replaced the cover and the gasket but it continues to leak. Any thoughts? I am assuming the casting is bad. I should've bought a new Raybestos. What was I thinking...!

I have a 48" walk behind that is in very good condition. I used it to cut a 1/2 acre of grass for the past 7 seasons. I just changed the oil and filter and greased all the fittings so it is ready for the season. Comes with a set of gartor blades. It has a 14HP Kohler Commander. Asking $1,200 or...

Can anybody tell me how to re-install the sail panels in a 74 Duster? I've been messing with these things for a while and they don't feel like they will go back in without snapping in half! Any help is appreciated. Thanks,

I rewired my car last year with a Ron Francis wiring harness. The wiper fuse keeps blowing everytime I turn on the ignition. The wipers are 2 speed with a manual washer pump. I had to use my original wiring harness and add the RF wire as the power source. Originally I had the wiper switch...

Hello, I am looking for the following parts for a 1974 Duster. Drives side Fresh Air vent. If you only have the door thats fine as that is all I need but I will take the entire vent as well. Looking for the heater controls for a non AC car. Thanks!

The old valve I had looks like the one on the left in the picture. The New valve I have looks like the one on the right. The Hose size seems like it is going form 3/8 to 5/8. How the heck am I going to hook up the the large valve to the PS pump since the hose will be so big? Thanks

Anybody heard of any of these places? I've heard of Snake Oyl but I have not heard of any of these places listed below. http://www.seatbeltplanet.com/ http://www.seatbeltsolutions.com/?gclid=CLKtlYDlhagCFUiK4Aod6kY-pA http://www.seatbeltsplus.com/?gclid=CIa00I_lhagCFcq8KgodUkD1rQ

Anybody have a picture of a March Small Block power steering bracket installed? Its a nice looking bracket but the instructions stink! Thanks,

I am installing a March Pulley on my PS pump. Does the the face of the Pulley have to be flush with the PS Pump shaft? If so, I do I get it the rest of the way on? Thank you!

On a 68 to 72 Centerlink how can I determine which side is the pitman arm side and which side is the idler arm side? Any help and pics are very much appreciated. I have the FSM picture but I can't see the difference. Thanks,

Does the speaker shelf go in before the sail panels on a 74 Duster? thanks,

I am considereing going to look at a 2009 Ram 2500 Diesel it has 40,000 miles and the dealer is asking $34K. Which is less then average retail per the NADA and KBB websites. Here's the link http://www.fiatstrongsville.com/inv/Detail.aspx?did=43135&vid=3D7KS28L09G517505 Does anybody have one...

I have up for sale a Z Bar that came out of my 1974 Duster. It has been bead blasted and painted aluminum. $35, plus shipping. Located in Garrettsville, OH.

14 inch big bolt pattern wagon wheels. These came off of my 1974 Duster. Tires hold air and are good for rolling that project around. I would probably not use them on the street but thats me! (Or put them on your car and burn them off!) Asking $75 Pick up only please. Located in...

All parts are located in Garrettsville, Ohio and came out of my 1974 Duster. I couldn't figure out how to price the parts next to the picture. Sorry! All parts do not include shipping. I will sell the whole lot for $75 plus shipping. Thanks for looking! 1. Arm Rests: $5, 2. Dash...

Hello, Has anybody used Snake Oyl seat belts for restoration? I was thinking about sending in my seat belts for my 1974 Duster to be updated. I also considered buying a set of their pre-made seat belts. Any help is appreciated. http://www.ssnake-oyl.com/mm5/merchant.mvc Thanks

I have 1974 360 Duster with PS and TTI Headers. I am trying to motivate myself to change out the PS Box due to it leaking. (I should've done this prior to assembling the car! duh). Does the drivers side TTI header need to be removed to change out the box or can I wiggle it through a hole...

Hello, Looking for 1970 to 1973 Rear Bumper Brackets for a Duster. I believe there should be 4 brackets. Thanks, Steve

I have a 1974 Duster that I rewired with a Bare Bonz Ron Francis wiring kit. I can not get the alternator to charge. I have the alternator tested and it is working properly. I am on my second voltage regulator and am still having the same problem. The alterntor has the main feed wire...

I have my 1974 Duster at the alignment shop and the mechanic said that it pulls to the right under acceleration. I'm not sure what it does that. Any thoughts? It is a 360, 4-speed, with a B-body 8 3/4 with 323 suregrip.

I screwed up! I have a 1974 Duster and I just had a 1973 rear bumper chromed and as you know it won't fit on to the bumper reinforcement. I figured all of this out at about 4 am this morning! Can I get a 1973 Duster or rear bumper bracket so I can use the bumper I just had chromed? I guess...

Is there a difference between a 69 Dart and a 74 Duster power steering gear box? The Napa part numbers are different but there are not specs. I would imagine the gear box itself is the same, but not quite sure. Thanks,

I would like to post a video of my car but it is 50 megs. Does anybody know how to reduce? I've already gone to You tube but there is a 20 meg limit. Thanks,

Can anybody in Northeast Ohio recommend a good upholstery shop? I had my car at a shop and all that got done in two months is a wrinkled headliner and wrinkled rear seat. Thanks!

I am finishing up my 74 Duster that now has power steering, originally had manual steering. The car is on jack stands and when it is fired up the the steering wheel turns to the left. I have to hold the steering wheel so it won't turn. Is there an ajustment on the steering box that will...

I have a 1974 Duster with a 66 B-Body 8 3/4 and I am attempting to measure for new tires and wheels. This is what I have done so far. 1. Used a plumb bob from the top of the inside rear quarter lip. I measured 4 inches to the drum mounting surface. 2. Measeured from the plumb bob to the spring...