Search results for query: *

I changed out the wiring on my 71 demon 340 with M&H factory style harness from YR1. I recently got the factory 71 idle solenoid rebuilt/refurbished and want to install but I do not see a wiring harness for it or wire from the main harness? The FSM shows a dark blue wire going to the ballast if...

****ALL SOLD**** Slightly used - Power Master #3257 starter - used only to get the car running after engine rebuild then found date coded starter - NEW $248, will sell for $100 NEW - Tuff Stuff alternator 130 AMP - I had painted the pulley to match OEM, then found correct date coded alt. -...

NEW - Header bolts hex head (9) - $10 NEW - 1970-71 340-440 Carter AVS Idle solenoid bracket - $30 NEW - A/B hood scoop mounting nuts x 11 - $15 ***SOLD*** USED - freshly refurbished A body blower motor mounting bracket to firewall with new gasket - $30 ****PM IF YOU NEED TO SEE CLOSE UP...

NEW - Pack of (3) different Master cylinder gaskets ; 2) foam 1) gasket material - $6 made by Detroit Muscle Tech. NEW - 69-74 brake distribution block part #BLK250 - $60 NEW - (rebuilt) by Brake/Equipment Warehouse in MN - Weatherhead brake distribution valve - $200 NEW - 72-76 A body Rear...

Mr. Norms - Dream Motors Super Charger vintage sticker - $40 - Will sell unframed for $25 Dodge Scat Pack banner - $25 ***SOLD*** NEW - A BODY Fresh air vent to cowl seal (DMT) 63-66 fresh air vent to cowl, 67-76 NON A/C heater box to cowl, 67-72 AC heater box to cowl $8 NEW - (1) Rallye...

NOS - 340 McCord Mc4522 LH exhaust gasket. Left end flange separated from the rear (see pics) Easy repair and once installed should not move. $500 + the ride Very hard to find these days as the Mopar Performance repop was discontinued two years ago. PM here on the board- Located in NW Indiana

Looking for power disc brake master cylinder - Mopar part number 2944453 and will have casting number #2229171 on the bottom. Similar to attached photos - PM here on the board please -

71 Demon - ALL new wiring; under dash, column, engine etc and NOS horn relay. Horns had been working - Prestolite pair that I had the powder coater PAINT and not powder coat due to the heat. Horns stopped working, checked fuses - all good. Standard base steering wheel - push the button and...

Looking for 1971 only drivers' side idle solenoid bracket for 340 Demon. I believe it's the one shown in the photo. PM here - thanks!

BRAND NEW Carter AVS solenoid bracket - retails for $70 - sell for $50.00 USED - 23" hood pin cable set: pins, 23" lanyards and new screws (no gaskets) - ****SOLD**** BRAND NEW - large MC cover - cad plated in color - ****SOLD**** Prices don't include the ride - located in NW Indiana PM here

Not sure what cap I need for the Demon 340? Current cap appears to be 72-up? I need to find the “insert” that I can change out so the cap can seat properly. Purchased a couple of caps from Vans, but neither fit. Also how about the filler neck does it look correct? Thank you!

REPOP - Tuff wheel with the molded grip, integrated horn switch and horn pad - same one Year 1 sells - $150 Factory Tuff wheel adapter - nice shape, horn wire was repaired at the end, also includes the mounting nuts x 3 - $150 Located in NW/Indiana - PM here please Price doesn't include the...

NOS - 70-71 (may fit other years?) - came out of an NOS brake package - $45 REBUILT weatherhead brake valve - rebuilt by brake and performance in MN. - $110 Prices don't include the ride - Located in NW/Indiana

USED - Edelbrock Performer aluminum intake - $100 **** SOLD**** USED - PowerMaster starter; was installed and found I needed mini starter - $ 125 (starter is OEM replacement #3257) NEW - Tuff Stuff alternator - never installed, can't return as I had painted the pulley black, found an OE...

Driver quality - ***SOLD*** factory black kick panels $30 - bucket seat backs, one is cracked $40 pair or will sell one if needed for $25 Prices don't include the ride - located in NW/Indiana

Car currently has a Saginaw PS unit - having trouble finding the correct PS hose part #. I found some info that some A bodies use Mopar 3420193 - same as TA/AAR? But I'm assuming that is for the Federal pump as that is what's on the E body AAR/TA. Anyone know what is correct or what will...

Looking for a minty mint ORIGINAL BLACK 71 base steering wheel with ORIGINAL BLACK horn pad - similar to the one that sold here awhile back pictured below for my 71 Demon. Have aftermarket Tuff wheel and think I'd like to go back to stock. Not interested in a dyed/painted wheel/horn pad, must...

Machine shop says my NOM block has a crack and is maybe repairable, and maybe it isn't so I'm looking for a STD bore (if possible) non previously repaired/sleeved block only. Close to Indiana (Chicago area) would be great. I'll travel a bit to surrounding states if need be. PM here on the board...

Looking for a NICE set of STOCK 340 J code heads 70-71 - not ported , polished etc. Would prefer close to Chicago area so I can pick up, but if you're willing to ship, I'm interested as well. I'm located in NW/Indiana - 1 hr outside Chicago PM here on the board Thanks!

All parts USED - Located in NW/Indiana - 1 hour outside of Chicago Prices don't include the ride Payment by PayPal, Venmo, USPS Money order or cash - no personal checks. Edelbrock PERFORMER - 318, 340, 360 aluminum intake - good shape, and was previously painted Chrysler orange - $200 Carter...

USED - dual exhaust from my 71’ Demon (108” wheel base) - 2inch diameter This is a factory style - exhaust and looks to have been fabbed by some local exhaust shop and has cherry bomb mufflers and tips included. Has some dents, dings etc but if you need a cheap exhaust- here ya’ go! Due to...

New Mopar Performance 340 pie plate - $100 includes shipping in the lower 48 USED - 340 pie plate - $40 + shipping Located in NW Indiana PM here on the board

Looking for a NICE OEM Mopar power disc brake 5 port proportioning valve as pictured below for a 1971 Demon with factory PDB. I have an aftermarket one but want a nice used original Mopar one I can have rebuilt. Car didn’t have one when purchased. Had an aftermarket booster/master/ valve. PM...

I’m not too familiar with these spacers for the PDB master cylinder? Which side goes to the rear of the master? I’m assuming the round side and the flat side goes to the booster? Also I have three gaskets? Which gasket is correct for this application and does it go between the rear of the...

Looking for an NOS Mopar Performance #P4529083 340 air cleaner pie plate - this is the ORANGE pie plate NOT the red one. PM here on the board - Thanks!

Had my steering column down to replace all the inside switches etc. bolted the column back in position and the tuff wheel adapter can keeps wanting to suck in almost metal to metal at the top (12 o’clock) and a larger gap at 6. The groove on the column shaft is lined up with the master spline on...

I will have to paint the center "cap" section on some new repop rallye dash lenses - I practiced on the old ones using a brush/paint and it looks like crap. Anyone have experience doing this before or a certain method? I have a chrome paint pen for the outer ring, just looking for a method to...

WTB: 71-74 A body bucket seat with the later style molded in hinge: I need ONE of the small brackets that holds the button inside the bucket seat. (See pics) I'm located in NW Indiana Thanks! PM here on the board

Looking for the actuator rod for the 71 A body clutch switch #3488174 as shown in the attached photos. My last resort is to make one with coat hanger wire but would prefer an original. PM here on the board please. TIA!

I had my heater box restored and before sending it out, I observed the blower motor ground wire was behind the spacer for the mounting stud. Would this be the proper location? I had not had the car long before taking the interior out so I don’t know if the motor worked properly before hand...