Search results for query: *

360 are a pain to get settled in the cradle right the Cuda I sold had a 360 in it and ended using truck mounts upside down to get it sitting square in it. I know you are budget minded but I do have a 71 340 up for sale and yes I am an ole fart but I have it listed for 6 k I will drop it to 5 k...

it's ether 5/16 or 3/8 fuel line probably 5/16 depending on how much fuel you want to deliver and what motor your running small block 5/16 big block 3/8 and with it being newer than 71 should have a return line or vent line

Thanks guys you have been great payment has been received on Cuda so we have a new member with a new a body I hope he enjoys it and has many new years with it congratulate Zaphod to the purchase of a fine A body Ray

Junk Yard

yup the way the shifter linkage is set up it is a 3 speed with over drive that is the way mine is set and I love it with 355 gears she gets 22 mpg at 70 as long as I stay out of the other two carbs LOL

Randdhscvaxle@sbcglobal.net

here are some more picts

The sale fell thru so she is back up for sale 1967 barracuda notch back 360-727 355 gearing 360 is a pro street built by Ultra Tech racing engines in Mishawaka IN heads have been ported and polished and flowed 202 and 168 valves runs mid twelves the trans has B&M clutches and shift plate also...

fresh built 01/20/1971 340 serial number 2b103998 as near as I can tell numbers were not stamped very well 40 over 10-5 comp sealed power pistons 10/10 crank semi balanced X heads (big valves) this one is not cheap 6000 k with core must be a 340 7000 with out core can be installed if you want...

the big issue is what is the pin height compared to stock piston you can change compression by lowering pin height witch raises piston in the bore I did that by using Chevy piston but the pin height was 30th lower witch raised the piston by that much in the bore raising compression and were a...

The ones posted as numbers stamped are the ones in last post 38176141 that are under drain hole

see new conversation about who might have shafts

stamped # 38176141 casting # 2780930-340-5 Ray

I don't know what year your motor is but dodge had a problem with the 5.9 with the heads cracking between ports so make sure you get them checked cracks are quite visible when you clean heads with wire brush between valves 1998-2001

What everybody forgot is the rod has a v groove in it to spray the cam with extra oil so really with the chamfer needing to go to the front the v groove in the rod needs to go toward the cam

I agree Brewers is the place to go I have done a lot of rebuilds with them and have never had a issue with them also there is South bend Clutch who I used for My demon but it is a racing clutch and they are friends of mine so the price was right

up for sale is a 1972 dodge 340 freshly built 30 over bore standard mains and ten over rods 360 heads with manly 202 and 168 intakes manly springs Clevite cam 229-2300 453 lift intake and exhaust 304 duration hyd lifters new oil pump eddlbrock torker 340 4 bbl intake all machine work done by...

Thanks Guys I really appreciate it

Hey guys check out the 67 Cuda notch back I got for sale in the classifieds she needs to go so don't be afraid to make me a reasonable offer on her Ray

Yup I take 10/325 4 times a day just to move but oh well what are ya gonna do I just hope the government with all there talk don't make it any harder to get what I need with out having to jump thru any more hoops then I got now

check your doctor out and the hospital for mersa cases if there is a high rate go somewhere else. They totally destroyed my back I ended up with osteomyelitis witch is a Dred disease it ate two disc right out of my back

Well if you need help or advise let me know and I have pretty good parts guy that does all mopar here and has a lot of parts if you want send me a private message and well exchange info so we can call Later

Sorry I haven't been on in a while Had massive back surgery and then I got an infection from the hospital and almost died but was able to get back finally then had to have the metal taken out because I keep getting sick got thru all that was able to at least hang on to my car and get a 67 Cuda...

1967 Cuda notch back completely restored appraised at 23,500 will sell for 18,000 have documentation on car and receipts for parts. 360 engine built by Ultra tech racing engines in Mishawaka IN heads ported and polished headers 727 auto with B&M shift kit and shifter. Auburn 355 gears and posi...

up and running

back up

I have a 1972 dodge demon numbers matching 340-727 car runs and drives car is not cut up have fender tag custom order car needs trunk and extensions and lower 1/4s rest of the car is solid including the frame came out of Florida sat in mi for 26 tears motor runs all original except for paint...

Date code 73 already bored and cleaned j heads cut to run 202 valves and have new in the box valves, crank ground needs balanced have all misc pieces to assemble rods need worked needs pistons and pins heads were set up foe the newer gas PM me 1300 plus shipping pick up in 46544 Ray

a set of headers witch are only nabout 120 dollars and three inch exhaust would help. do away with the points go to ether stock electronic witch came out in 72 or go to msd I run all the above on my 340 and i'm only pushing 8-1 compression and it will go sideways in second