Search results for query: *

I’m looking for an inexpensive option to replace my brake booster. This is the best option that I’ve seen, as far as price and quality of product(based on reviews). Does anyone out there know of a site that has them in stock? Or, is there another option out there in the same price range?

1973 Dodge Dart Sport. 360 with 3.91 suregrip. I’ve been going through my car and just started rebuilding my front end and on inspection of my front disc brakes, the rotors and rubber lines are shot. I’m going to upgrade the rotors. Doctor Diff sells 11.75” rotors with calipers for $600. Will...

I’m setting up to rebuild the front end of my ‘73 Dart Sport. I bought a kit from Dr. Diff and added the idler and pitman arms. I’ve watched a ton videos, read multiple articles and have my service manual. The kit comes with pre pressed ball joints. Are there any potential pitfalls that any of...

I’m looking for a set of black sail panels for my 1973 Dart Sport. PayPal preferred.

I just wanted to thank this man for all he’s done for me personally on electrical problems and for all the other folks on this site he’s helped. I’ve read countless threads and I’ve seen this man help so many folks. There’s a long list of you here that continually help this community, but i feel...

Why the F is so hard to punch out?!? As a non mechanic with only one make shift press, this pin is a m f’n PITA. I’ve torched it and pounded the crap out of it, but she’s a tough girl and only budged a touch. I’m not really asking for help, just venting. lol

I’ve looked around and can’t seem to find to find them for sale on line. I’m not certain as to what they’re officially called and that could be the problem. Lol.

I have a ‘73 Dart Sport with an LA360 in it. Unknown engine build. I need advice on what step to take next. The cars been sitting for almost 3 years while I was messing around with the electrical on it. At some point it started smoking while I was testing the electrical in the last 2 years. I...

I’m looking for a clean cluster bezel and a set a of clean tail light bezels for my ‘73 Dart Sport. I just shopped repops for the tail light bezels and folks wanted $500 plus for the set… That’s out of my price range.

After 2 years of messing around with my car’s electrical, without success, I finally ponied up and did a full rewire… I ended up installing a new AAW harness and I’m getting a touch of smoke coming from the starter relay. The red power wire from the from the battery post on the starter relay...

I recently purchased this wiring harness for my 1973 Dodge Dart Sport with an MSD ignition and distributor and aftermarket radio. I need to upgrade to a one wire system and I’m leaning towards the 17509 Powermaster Retro. The harness itself is marketed as pretty much plug and play. Is this true...

Not mine, but a very clean ‘72 Demon. Newly repainted with new interior with a 360/727/8 3/4/2.93 open drive train... Originally a 6/904/7 1/4. The sellers in Oregon. 1972 Dodge Demon

I’m hoping someone has a set of new KB107-040 or Sealed Power H116-CP40 pistons, RPM Air Gap and an Edlebrock 1407 mechanical carburetor lying around, collecting dust that they want to sell or trade. I have a few items I’d be willing to part with and PayPal. I would rather buy than trade, but if...

I only have the housing and axles left, but they’re free for anyone who wants them. I’m guessing no one, but just in case. I’m in the Los Angeles area... 90232.

When I use my break pedal as a ground, there’s a voltage drop of about 1.7. If I ground anywhere else, testing the same wire(s), it’s consistent every place else that I use as a ground. I don’t see any wires touching it. Seems odd to me. Any help is appreciated.

I am new to Mopars and never was a mechanic, but turned wrenches in my youth a bit and work with my hands when employed. My plan is vague at the moment and full of holes, but I hope to continue to improve upon that in the next couple weeks, before moving forward with the build. Due to budgetary...

Looking for molded plastic headliner and sail panels in black for a ‘73 Sport.

There’s a few books out there, but after looking around it’s hard to decide which one to buy. I’m looking for more of an instructional book that concentrates on the building of a small block LA series engine... This will be for a LA360. Any suggestions on your book of choice would be...

I’m trying to source a bulkhead connector. After searching online, there are many options... Most of which will take over a week to get here. Is there a chain that carries them? I can’t seem to find a place for a local pickup. If anyone here has one and can ship pretty quickly, that’ll work as...

Is there a shop in the LA area that y’all trust and isn’t charging by the hour to replace bearings? Back story: I bought a drum to drum ‘66 8 3/4 b body rear and the axles it came with have bent retainers. I can bend them back, but I figured I might as well change them and the bearings out. I...

I’ve seen a few 7 1/4 rear ends with Sure Grips sold, but nothing in the last three years. What’s the market for a complete 7 1/4 Sure Grip rear end and also for just the carrier? I know 7 1/4’s are hated by most and is not worth much, but the Sure Grip 3rd member is rare and has some value. I...

I have ‘73 Dart Sport with an LA 360/904 that was built by someone 15 years ago and I don’t know anything about the specifics of the build, but here’s what I do know. It has a 360 block casting number 4006830-360-9, 3769974 head – 1975-1976 1.88/1.60 valves, Mancini Racing Adjustable Rocker Arm...

I’m at the point with my car now that I’d like to start cleaning up the look of the engine bay. Tidying up wiring, rerouting spark plug wires and the A/C mess. Can anyone post a picture of your SB engine bay with A/C? The wiring and plugs will be fairly easy to sort out, but before I mess with...

My engine casting number is 4006830-360-9. What does the 9 stand for? I’ve looked around, but only found one result that was for 4006830-360-4 and someone stated that the 4 designated how many changes that have occurred since the 360 came out to correct the thin walls. Any clarity would be...

I’m looking for a complete set of tail light bezels for my 1973 Dart Sport. I have a set in ok condition, but I want to find a better set that isn’t $500 from an aftermarket shop. I’m not looking for perfection... “driver quality” is a loose term, but a little pitting and faded paint is ok...

I have a 1973 Dodge Dart Sport with a MSD 6a digital ignition, blaster coil, MSD distributor and unknown after market wiring harness. I recently had issues getting power to my ignition and it also wouldn’t crank. After double checking wiring and cleaning the posts on the battery, it started...

Does anyone have a wiper connecting link, part #3431688 that connects the R & L pivots for sale? Thank you in advance!

I’m looking for advice on which route to take. I currently have the stock 7 1/4 rear end. The previous owner upgraded the engine to a 360, but kept the weak 7 1/4. What is the best option for an upgraded rear end? Best being affordable and also available with a little luck. I’ve been looking...

I’m looking to make a demon clone out of my 73 dart sport. I’ve found a yard that has what I need for $1850 shipped... fenders, hood, grille, grille latch support, valance and bumper w/bracket, in “good“ condition, except the grill has minor issues(unknown what the issues are at this point). I’m...

This is for a 1973 Dodge Dart Sport. For starters,I’m a novice with electrical. I took apart my dash a few weeks ago to give it a refresh. I took decent pictures and took note of anything that might trip me up when reassembling. After reassembling the cluster bezel and installing it, I’m not...