Search results for query: *

Here I have a pair of turn signal lenses that were in a box of A body stuff. I don't know the exact years or models these lenses cover but it is pretty wide. Part number is 2234278. They are in good shape with a nice shine but do have some minimal flaws. There are some small spider cracks you...

This was in a box of parts on the way out of the garage. It is in decent shape but I think it has seen a little moisture. There is some warping on it, some stains on the edges of a few pages and the staples are a little rusty. Also has writing on a few pages. Still worthy of being in a car plus...

This is an original used black plastic glove box liner. Believe it was removed from a 1975 Dart as an owner's manual was in it. Probably has a wide application but thought these came in the later years and the earlier were carboard. It is in nice shape but does have some rust stains in the...

Here I have a pair of heater bezels that I don't need so they should get passed to someone who can use them. One I actually labelled 70 Duster but the other one looks the same. Probably used on many different applications but I could tell you the exact applications as I have one that is silver...

Here I have a pair of dash vents I found in this week's go away box. They are in good shape with all mounting pegs, nuts and clips intact. There appears to be some dust/dirt in the finned part, but you have to hold them in the light the correct way to see. Imagine trying to see that in the car...

Found these in a box stashed in a glove box liner and since I no longer have a 68 they should go to someone who can use them. These are the flat style which I think is correct for Plymouth vehicles. They are in nice driver condition with a few imperfections on the face and a few pits on the...

These have been laying around in various parts of the garage and it is time for some to move on. They vary in condition and price from left to right in the first picture. The left one has more corrosion and wear, and the cup has a wave in a part of it. Should be easy to flatten in case someone...

I have a set of driver quality or local car show bucket seat trim for either a Dodge or Plymouth. Also used on bench seats and B bodies. They are shiny on the outside with silver/chrome paint on the backs. Light scratching from use and a few minor flaws in a couple places but overall very...

Found a box of these and thought they were a set, but half turned out to be Challenger 70J. These are 70L which I believe is correct for a Dart. They are in good shape with some minor flaws. Red driver side one has a few pits and a very nice lens. Passenger amber has more pits and has the...

Brought this box of stuff back from my moms and it has been sitting on the table. Time for it to go somewhere else but think it all came from some type of A body. It contains what appears to be mostly 73+ trunk locks mounted with the nut and all have long rods. Also appears there are 2 clip...

Here I have a nice pair of kick panels I got from a local racer's estate. If I had to guess I would say they were early take-offs out of a Barracuda when it was stripped down to make a race car. They fit from 67 until they changed the emergency brake location which I don't exactly remember when...

Here I have a nice pair of kick panels I got from a local racer's estate. If I had to guess I would say they were early take-offs out of a Barracuda when it was stripped down to make a race car. They fit from 67 until they changed the emergency brake location which I don't exactly remember when...

Found this in a bag while searching for something else. This is a nice original with the bronze background still present, though the lighting made it look pinker to me. Has both mounting pegs and one nut. Does have some flaws on the inner ring but didn't want to get too aggressive cleaning it as...

Here I have another random item from the garage that I will probably never use. Brewers says a 7" tube is correct for 1967-76 A bodies with a small block. It is in nice shape but could use a repaint if you need it that nice. I would like $45 plus shipping from Puyallup WA.

Here I have a parking light assembly that has been in a box staring at me since I moved. Time to go. As most it seems the housing is in great shape but the lens is hammered. No corrosion that I can see, and the wires are intact. Part number is 2930490. I would like $25 plus shipping from...

See these have been in demand so I will put this up as it rarely gets warm enough for AC here. These were pulled out of a 69 Valiant but should fit other A bodies of the same era. Unit is complete and appears to be in good shape other than it needing a better cleaning or detailing. Buttons are...

I believe this is a 1967-1976 windshield washer floor mounted foot pump. Removed from a 69 Valiant but will fit other models as well. Good original used condition but could use a better cleaning or detailing if you desire. Works great as it shot fluid over the hood of the car when tested. It...

Found another basic radio in a bin while I was looking for something else. Radio has a great appearance with shiny chrome and clear face plate. All wires intact and all knobs appear to function except for the station change knob. Dial moves with the presets but not the knob. This would be great...

Here I have a nice GT emblem that I will never use so time to make it go. I believe it is correct for a 69. In great shape overall but some black paint loss on the fins. There are also some flaws on the chrome ring, but they just feel like nick and not pits. You have to get fairly close to...

Here I have a nice radio delete plate I pulled from a 69 Valiant but think it also fits the 68. It is in nice shape with a few flaws and typical yellowing. One of the pins on the back is broken but I do have it along with the other mounting nuts. I would like $45 plus shipping from Puyallup WA.

Here I have 3 of the 4 dash trim pieces from a 66 Valiant. Found them in a box of 64 Belvedere parts I bought. I don't know if they fit other Valiant models or Barracudas as I am more of a 67-69 guy. They are in nice driver shape as they do have some flaws as shown in the photos. There is a pit...

Here I have some emblems for a 69 Dart which I don't own. Came with a bunch of stuff I bought but time to move them along. The top one was a trunk emblem which is already sold. Second it the 3 pin hood emblem part number 2898866. Third is a Dodge fender emblem part number 2901894. I can't tell...

Here I have a nice pair of kick panels I got from a local racer's estate. If I had to guess I would say they were early take-offs out of a Barracuda when it was stripped down to make a race car. They fit from 67 until they changed the emergency brake location which I don't exactly remember when...

Here is have a nice ignition bezel from a 69 Valiant but will fit others. It is in great shape with no cracks, chalking or major flaws. Probably because it spent it's time safe in the glove box. Since last time I listed this I found a green one that is in comparable shape. I would like $10 each...

I found some more of these and don't have a car they will work on. There is one pair that has nice chrome and lenses. There are some scuffs and nicks but no pits. One plastic boot is torn also. Second is a single that looks NOS. It does have some nicks from being in a box of stuff but if I had...

Here I have another NOS emblem I found that I believe is part number 3613151 which shows it fits 71-76 A bodies. It looks to be the same plastic self adhesive emblem I recently sold but now that it is gone I can't lay them side by side. And of course, the part number in on the back under the...

Here I have an NOS emblem part number 3613151 which shows it fits 71-76 A bodies. I also have another NOS Dodge emblem part number 3811220, which I see others have said fits an A body, but my research shows it as fitting 75-80 St Regis, Aspen, Monaco and Royal Monaco. Both look the part and came...

Here is have a nice ignition bezel from a 69 Valiant but will fit others. It is in great shape with no cracks, chalking or major flaws. Probably because it spent it's time safe in the glove box. I would like $20 plus shipping from Puyallup WA.

Here I have two 4 pin hood emblems that fit hoods for 68 and 70 Darts. They may fit more but I am not sure as I am more of a Plymouth guy. One emblem looks NOS as it has all the black paint and the pins don't look like they have been mounted. It does have some shelf wear on the face but is in...

This is a set of seat belts I pulled out of a 69 Valiant 4 door bench seat turd. 3 rears and 3 fronts with shoulder belts. Body was pretty hammered but the interior was not too bad. These are not the greatest set as they have discoloration and corrosion but are almost complete. Front have more...