Search results for query: *

Okay thank you for your time everyone. I will get into this more

I don't have too much experience with breaks so this is why I have my questions I just found my rear drums off an old Dart small bolt pattern the smaller rear end however it is 10 x1 3/4 drum I think I'm going to just order the 10 x 2.5 shoes Are saying I buy new stock drums and go back to...

I found that the rear shoes are actually 2.5" wide not 2.25 The shoe actually goes right to the edge of the drum. See attached photo. I added two new photo's Keeping in mind this is an 83/4 diff and small bolt pattern I found a place that offers the shoes 10 x 2.5 however I'm concerned...

I will investigate the backing plate. Thanks for entertaining me with some knowledge.

The wear pattern is even side to side. 14" small bolt pattern This is why I suspected they are front shoes. My other dart is normal 1 3/4 width Edit I did find some 2 1/2 width on the 4.5 bolt pattern your right

Here is the photo of the rear shoes. and drum

Yes I will post up after work today thank you

Rear is 8.3/4 Both front and rear shoes are currently 10x2.25 in 10.060 drums. My question is can I use front shoes 10x2.25 on rear? Since I cannot find rear shoes in 10x2.25 only 10x1.3/4 I'm assuming was what the previous owner did

I have read through the forum looking for answers and found lots of ways 68 darts came with drums on front and rear. My dart has 10" front and rear drums. The front is using 10" x 2.25 shoes The rear is using 10" x 2.25 shoes I found lots of front 10" x 2.25 shoes however only 10" x 1.75 rear...

Had the same issue before and it turned out to be a broken wire in the TurnSignal Switch. I soldered it temporarily and ordered a new one.

Hi gang Trying to find a place I can order the 2 black rubber filler pads that hide between the rear bumper and fender on the ends. I believe they are referred to as jack pads to protect the fender paint Thanks in advance

My friend has the on his 68 dart ... look great and not disappointing at all.. Im leaning in that direction

Welcome!!

I didnt have much issue with Dougs on my 68 Dart. Had to shim the pass side mount 3/8" and get a mini starter. Other then that they are a nice header. Even used them for my break in and did not get any discolor in the finish.

I was going to go with the XE 268 but decided to go with the XE262. New 901-16 springs and stock rockers & rods.. 340 Dougs Headers Cool fall day turning the Dart around before winter storage

I emailed Wheel Vintique this week in regards to getting new 14 " rallys. He told me they I like the 14s and they have decent pricing for these rallys... Not sure the advantage for me to go to 15"s is there one..?

Another Mopar enthusiast from Sask !!! whoot Welcome to FABO :burnout:

franck bienvenus Vous avez une belle collection de Mopar . Merci de vous joindre FABO

Kewl another Born Again Mopar Enthusiast !!!! Welcome to FABO....

My header issue on my 68 Dart was on the passenger side. .. A nice shim fixed the issue. I presume over time the K frame tolerance is not perfect from factory. I guess the headers are designed from manufacturer specs thus a tired K frame might cause not a perfect alignment for the header tube...

thanks for posting a photo. I am going to pass on these. GL on your sale

Do you have some photos from the backside of the rims. I would be interested if they are rust free and rim true. Im not far from GR so it would be worth the drive

here are a few more

usually you would smell any external residual coolant... good indication of a leak..

My X heads love to leak with the MP Performance \VC.... so I notived the grooves on the LD340 intake interfered with the seating of the VC. So I filled the part where it touched bit by bit until there was no touching when gasket was on.... Voila no more leaks... Used the black rubber MP...

I just installed the XE262h comp cam and love it. It was a huge step down from the radical idle at a stop light. My dart still gives it hell off the line for a fun street cam. It was some getting use to because my driving habits still expect the radical idle but I love the fact I can have a...

Want to thank everyone for there assistance. Pleased to say all is fine and did our first local car show... next up is Mopar Fest 2014 in New Hamburg Ontario In the photo is our Dart and my friends awesome Charger...

Very nice :) It is great to sit in the drivers seat and not have fender shake. The XE262 is a lot tamer so it will be some getting use too. However she takes off just fine. :cheers:

www.youtube.com/watch?v=fKOaDh-MaqE&feature=youtu.be

Been using Royal Purple with zinc for sometime now. I think that lobe just gave up... But a good question. Hard to say what was being used before I bought it back in 2011. Now we have a fresh start. Got the exhaust hooked up today and I set the timing up. Now I need the carb set...