Search results for query: *

Great ride. Lowered suspension. Poly urethane bushings, quick ratio steering, frame connectors, solo racing torsion bars, 6 leaf springs, mono tube Edelbrock ISA shocks. Engine has Edelbrock aluminum RPM heads, Mopar aluminum Duel plane intake, Holley 700 cfm double pump carburetor, shorty...

Found most of the receipts from the build, also found the build sheet. I have almost all the parts to put this suspension back to stock if so desired. Factory spindles and control arms, front sway bar, rear axles and drums. Factory J heads, and stock rocker arms as well and factory tac. Also...

If interested and too far to pick up, and your in Canada or the US, I will looking into shipping and cover cost within reasonable amount for train or open trailer truck, or similarly priced.

As tight as I could get it without touching on a lowered suspension.

I went with a 18"X8" front with 5 3/8" back spacing, and 18"X9.5" rear with 6 1/4" back spacing with a 3/4" inboard spring relocation kit. Tires are 225/45-18 and 265/35-18. very tight fit but it works.

LM23H0R312584

4 speed bench seat 340 car. Great ride. Very clean restored Swinger. 2" Lowered suspension using fat man suspention drop spindle. Firm feel tubular upper control arms, 1 1/8" big front and 7/8" rear sway bars, plated reinforced lower arms. Poly urethane bushings, Firm feel quick ratio...

I haven't been active on for a-bodies for a while, but I do check in from time to time to see what is going on. It looks like I will be making the trip by my self this year, and was hoping I could join you guys on Sunday? :toothy1: I can bring shade as well as my 70 Swinger, once I get it...

I have to agree, I have not been on the forum for a while, and just noticed what I have been missing. Very nice project. I am wishing I went this route with my Dart. I love the mini tub and the tires you got in. I only go a 265 without the tub, more tire lookes great. But it is all looking...

I measured the backspacing for my wheels. The front wheels 18" X 8" are 5 3/8" backspacing.... The rear wheels 18" X 9.5 are 6 1/4" backspacing.... I moved the rear springs in with a .80" off set hanger to make room for the wide wheels and tires, also I centred the rear axle housing to the car...

I think the products they make are great. I used the upper controll arms, the stage 2 steering box, the fast ratio pitman arm and ideler arm. I like the parts very much. And they are a great help on the phone.

has anyone ever locked the distributor up? The reason I say this is because I am going through lots of unburt fuel and I blamed the cam and the carb, but what if the distributor was locked out. Put at one setting and left alone. I am told the car will preforme better off the line, will burn...

Talking to Tim a Hughes engines he likes the traditional stye cam they are known for. http://www.hughesengines.com/partDetail.asp?partID=11520&eTypeID=1 Intake Valve Lift 1.5 Exhaust Valve Lift 1.5.470" .506"Intake Valve Lift 1.6 Exhaust Valve Lift 1.6.501" .539"Intake Duration at .050" Exhaust...

Thanks a bunch. I see most of you agree the cam is the problem. I took a look at Hughes and found a sweet cam that give the sound of a big lumpy cam but not the draw backs of a big cam, like fuel comsumption. http://www.hughesengines.com/partDetail.asp?partID=11613&eTypeID=1 will this cam...

Hello all. I was wondering what the A body group would suggest for my 340. spec: 10.5:1 comp 509 lift 292 dur (purple shaft) Eddy heads M1 dual plane 4 spd 3.73 or 3.23 gears (depends where I am going) I now have a 700 double pump and its going through fuel like nothing. I think like a lot...

Thats for the rear Good luck finding one thats rust free and perfectly straight for anyting close to $65.

I have a rust free front valance from a gold 71 Dart Swinger. It has some dents but it's clean. $65 + shipping form Ontario Canada if you want it.

Welcome aboard fellow Canadian, Welcome.

I am talking about the speedo pinion gear, the one that goes into the A-833 to correct for gear changes in the rear end.

Hello, I am looking for a 39 tooth pinion gear for my 833. Used is fine with me.

only one manufature of quarter panels for Dart, but many suppliers. Your local body shop can order the same panels from there suppliers. Its all the same for now.

18 look great, not too big, not too small, just right. I have 18X8 front and 18X9.5 rear.

I have a pair of green ones in perfect shape. $25 + shipping.

I am looking for the very same gear #52068061

that would be great.

Hello all. Would you be able to tell me what speedo gear (number of teeth and color) I would need for my Dart. I have the 833 and a 3:73 rear gear in my 8 3/4" with a 25.3" tire. Thanks for your help.

I used a 120V mig but it does recomend a 20 Amp dedicated line to run it. I used a 15 Amp line and it triggered the fuse panel a few times. With the light welding you want to do, and the low setting it should be ok.

I primed the moter, removed the relocation kit and its running great. Thanks again. Nothing damaged, but a lesson learned.

Found it. PN 2998324 from a 71 Dart /6. Looks really nice. What's it worth?

The hoses were reversed form what I can tell. The relocation kit was on the car at one time. It was given to me by the seller off the car. I assumed it was plubed properley. Well thats what you get when you ASSUME you make a *** out of U and ME