Search results for query: *

Anyone got one that will fit a 67 Dodge Dart?

Hi all, I'm going to be putting an 8 3/4 in my Dart. The center chunk was out of a '67 Coronet, and it's going onto a Dart that had a 7 1/4 with a 273 and an auto trans. Anyone know which u joint will work for this set up? Obviously going to need to shorten the driveshaft as well, but curious...

I'm going to be installing the 360 in my Dart this month. I am using the mopar electronic distributor with the orange box. I have the proper ballast resistor, but what ohm coil should I use with this set up? Any particular coils that you like better than others? I the Pertronix Flamethrower...

Okay. So I'm getting ready to put the Magnum I built for my 67 Dart with air conditioning. I have never done a motor on a car with air before, so I have a couple of questions. Is it safe to just disconnect the lines on the A/C ? Will it damage anything not having freon in the system while I'm...

If I understand correctly, the 273 is an internally balanced engine. Am I correct to assume then, that the stock torque converter is unweighted? I ask because I'm going to be installing a 360 magnum into the car that has the weighted harmonic balancer and flex plate. Do I need to pull the...

Here's my issue. I've built a 360 Magnum like the mild magnum build here on this site. I'll be starting the install of it in the next few weeks. My car is a 67 Dart with its original 904 with 18 spline and its original 273. Performance torque converters for this are either non existent or...

Anybody got a pair of these laying around? The price for new ones is outrageous. Picture for reference

I'm putting a tach on my 67 Dart. I'd like to put it on the column, but being a column shift car, the space is tight there. Anyone have any suggestions or pictures on where they mounted their tach? Thanks!

Switching the rear end on my 67 Dart to an 8 3/4 and need a set of backing plates and drums for SBP. I'm running the factory steel 14" rims with the GT hubcaps. Open to other parts as long as they work with my axles sbp and steel rims. Thanks, Doug

Anyone got a nice used one they're willing to get rid of?

My 67 Dart 270 has the original 904 transmission behind a 273. I'm trying to purchase a converter for my 360 magnum build. Is 67 the changeover year from 18 to 27 spline? Thanks, Doug

Trying to decide on what carb to use on my 5.9 Magnum build. I'm thinking 650cfm as it's not a strip car, but more a performance street. My question is, would you use a mechanical secondary set up, or vacuum? Car is 67 Dart. 3:23 suregrip, havent decided yet on the torque converter but thinking...

Hi all, Now that the 360 Magnum I've been building is complete, I'm now thinking of the best torque converter to couple it with. My Dart has a 904 trans, 3:23 Sure grip, Engine is built with a Lunati cam with these specs: Retro-Fit Hydraulic Roller. Good high performance street cam with slight...

What do you guys like for oil pan gasket sealant. Permatex black? The Right Stuff? etc, etc.

My Magnum 360 build is complete. Just wondering what everyone uses for plugs for these. I have a fairly mild Lunati cam, 2.02 intake heads etc. Stock spec plugs good?

I know it's probably a long shot, as it seems these things are like hens teeth now a days, but does anyone have a set of these kicking around that they'd like to part with? Dart - Doug Ritchie] [/url] *Found. Thanks jdsduster!

I'd like to take my cable off and lube it as the speedometer needle bounces like crazy from 0-120 mph. Hoping that it actually is the cable. I crawled up underneath to remove it from the back of the instrument thinking it would just unscrew, I found that it has some kind of plastic clip...

As I'm getting near wrapping up my Magnum build for my 67 Dart, I need a water pump. My car has AC and I'd like to keep it. I also have the driver side inlet on the pump. I can't seem to find any water pump that says "with A/C". Failing finding one for an A/C car, can I use this one? It says...

Whats everyone like for plugs in a carbed Magnum? Same RN12Y I use in my 273?

Anybody by chance have a small block timing cover with the timing marks on the passenger side?

Can I use the stock 5.9 front balancer with my LA pulleys, or do I need to buy the aftermarket balancer for correct spacing? Thanks

Can I use LA360 intake manifold gaskets on a Magnum that I've put a intake and carb on? Thanks!

I'm thinking of selling my 67 Dart 270. This car was a Texas car (Denton) its whole life until a year ago when I brought it here to New England. The same family owned it for 50 years apparently. Odometer shows 38,000 and the title I received from the seller said 36,000 not 136,000 so I'm not...

Driver and passenger side front for 67 Dart

So I picked up a set of electrical gauges for my 67 Dart. Problem is, they came without a wiring diagram. I'm assuming the ground and 12v at the bottom of the gauge is switched power. What I'm not sure of is the B and T. This particular gauge is for water temp. The sender is a single...

Okay, so as I'm getting ready to put heads on my freshly machined magnum block (+.060, yes it was sonic checked and is good). I didn't realize it would be as challenging to find head gaskets (like everything else now a days). I'm replicating the mild street build of 67autocross. I have found a...

As I'm wrapping up the short block build of my 5.9 Magnum that I'm going to drop into my 67 Dart, I'm getting ready to order heads. I'm looking to get EQ's with 2.02 intakes and have found 2 providers that are reasonably priced. One is Clearwater Cylinder Heads and the other is Performance...

Looking for a cam thrust plate (and bolts) for my 360 magnum project if anyone has one hanging around. Drip tab too if available. Thanks, Doug

Do any of you know if what the correct color for the hood sound deadener/pad is supposed to be? I see that they come in a gray and black. My car is a 67 Dart. Thanks!

Okay experts. I have installed an LD4B intake and Holley 600 on my 273. Everything thing went fine with a little modification to the air compressor support brackets, but nothing crazy. What I'm having trouble with is attaching the throttle cable and kick down lever. I bought the 340 cable...