Search results for query: *

I'll hop on and bring up an additional point of curiosity. Which air cleaner would clear the hood? The stock /6 air cleaner won't fit the BBD, and the 318 air cleaner is too large for an A/C setup. What are you guys doing in this scenario?

A quick question: I've reviewed a few videos online to mentally prepare myself for the installation, and I noticed half of the guys were adding oil through the oil galleries. Is that totally necessary? Or should I just pour in like usual?

Behold!

Allow me to rephrase. I understand the exhaust side runs hotter, but from the research I've made, mine has been running hotter than usual. Before upgrading the radiator and the fan, I was regularly on the verge of overheating. So far, I've only had one instance in the summer where I was getting...

Just heard back from the shop. Milling went well and the bare minimum was taken off. Apparently the head wasn't as warped as I had initially thought. He took a good look at the rest of the head and found that the exhaust guides were all in rough shape, which may account for the reason they were...

For my own curiosity and for the OP, how many points hotter should it be? I've personally never tried this.

I've got a '74 slant that came with the 1945. It ran significantly better with a late 60's 1920. No more hesitation upon acceleration.

Hey gang, just a thought while the head is being finished. Progress has been slow due to the freeze we had last week. In the meantime, I considered the sludge lingering on the oil pan side of things. Naturally, a change (as mentioned) is in order once the machine is back together. In order to...

So far, I’ve only cut one knuckle in the process. Usually it’s eight. I’m liking the odds so far! lol I’ll keep everyone posted once it is finished. I’ll also post some progress on the block side if things.

When I see him again, I'll be sure to ask. Pretty sure he was going to focus on that one and potentially a few more if they are not as precise as he would like. I'm also certain it won't be incredibly invasive.

Ah I see. Is there a brand name that you would recommend?

Hey gang. I’m back. Update on the project is this: I took the head to a good family friend to get his ten cents on the subject. After some evaluation, we realized the exhaust valve guide on the 4th cylinder was giving us trouble, hence the severe build up and evidence in the exhaust manifold. He...

For the rest of you coming to this thread looking for more details, the part number from the '74 parts manual is Chrysler 1947 708. I'll follow up with more matches.

Progress so far. Soaking the head today and sending it to the shop sometime this week. Eventually, I’ll give the pistons some TLC.

You guys are awesome. Thanks for all the advice!

As you see, the sludge is rather tremendous, but that is apparently a common denominator for many slant owners I’ve come to find out. Lol The same amount of carbon was found on the pistons, but the rings seemed to be in rather good shape.

Kind of my thought on the matter, however, I didn’t know if that would have negative consequences considering I’m not toying with the block/pistons/rings/etc. Curious to know if there is a part number for those seals? I’ve got a parts manual from eBay, but some chunks are missing. I saw on the...

It claims 67k, but I’m willing to bet it’s 167k based upon the wear. Besides a timing issue, it ran well. I haven’t removed the springs yet to see how the seals are faring. I had planned on cleaning and lapping the valves since it’s undeniable they need attention. I considered porting, but I’m...

So is there a win in this situation without yanking out the whole motor? I don’t have that time or that money. I just wanted to replace a gasket for Pete’s sake. Lol

Hey gang, Long story short, I took the head off to change the gasket in order to fix a problematic oil leak. Based on the stamped steel gasket, I don’t think this engine has ever been serviced since its birth in ‘74. As you can see, it’s been running hot for years. I finally got that problem...

Hey gang, I'm to a point where there isn't much more to do on the ride. It sounds healthy, drives healthy. My interest now is merely splitting hairs. I'm a bit bored and I also don't want to spend a kidney's worth of money. I've stumbled upon a few mentions of using different valve springs...

Here’s the new

Sorry for the delay, everybody. I finally got around to taking the tire off and snapping some pics with state of decay and measurements included. Opinions and recommendations? In the following thread, I have an image of the 10” drum behind the rim. My second question is this: why did they not...

Curious to know who your "guy" is. I'm not looking to spend an arm or a leg. I just want them operational. Looks like what I have on there now is pretty generic (I've never replaced them during my ownership.. But I've replaced the front). Went through Classic Industries last time, but their 9"...

Has anyone ever purchased rubber sleeves to go around these bad boys? Do they even exist?

I can believe it! It'll sit in a box until I get especially bored one day.

Yep, that looks like the one! Sorry for my confusion. Heater core has been out of commission for nearly ten years. We have since directed the hose from the water pump with a smaller j-shaped hose. As for the a/c, I think you answered my question about mystery canister A. After googling an image...

Good afternoon, gang. I am unable to post pictures now, but I certainly can tomorrow if not this evening. In the mean time, I'll present the question(s) just to introduce the thread. First, the car in question is a 1974 Plymouth Duster with the 3.7L 225, automatic. I am doing some deep...

Welcome to the group, Chris. I have a '74 as well. I'm no pro, but I have a good manual. I'm happy to send over some pics if you need something particular. Good luck!

Thank you! Man, I thought I was going crazy for a second there...