Search results for query: *

  1. 72moparnut

    Congratulations time to relax and slow down!!!!

    Congratulations time to relax and slow down!!!!
  2. 72moparnut

    Oil leaks

    Oil pan gasket is fairly new less than 500 miles just changed oil royal purple not cheap think I’ll just use the rtv and hope for the best also thinking of running pvc what’s the thoughts on that
  3. 72moparnut

    Oil leaks

    I’m not loosing oil pan bolts and only using partial gasket for front of oil pan and timing cover should I loosen the pan bolts at least the front ones?
  4. 72moparnut

    Oil leaks

    It doesn’t appear to be from seal rather the corners of timing cover where it meets oil pan. Did notice when installing timing cover the dolls were really tight in fact had I had to persuade it with light taps of a hammer and roll pin that just fit over doll pins
  5. 72moparnut

    Oil leaks

    Mine is leaking from front of engine have replaced timing cover gaskets and front seal 2 times once with rev and once without now leaks worse than ever. Have new gasket and front seal to replace again just want to get it right it is a 440 bb mildly built street car running breathers on valve...
  6. 72moparnut

    Oil leaks

    hi guys this will be the 3rd time trying to fix this oil leak. First thought it was just gasket failure. No replaced gaskets and crank seal. Also decided to replace timing cover as the one I used was 40 plus years old anyway here we again leaking worse than ever. Any help would be appreciated
  7. 72moparnut

    Hydraulic roller cam for bb?

    Replaced all those new less than 30 miles on them??? Got me scratching my head
  8. 72moparnut

    Love all old mopar muscle cars a/b/e

    Love all old mopar muscle cars a/b/e
  9. 72moparnut

    Hydraulic roller cam for bb?

    Hi guys I’m back with another? After cam swap and timing cover went for a short drive no leaks everything looked good went for arrive today 20/25 miles oil leaking somewhere in front of engine area not sure where but front of engine on top of k member very wet with fresh oil any ideas why and...
  10. 72moparnut

    Hydraulic roller cam for bb?

    Some pics of engine
  11. 72moparnut

    Hydraulic roller cam for bb?

    Her she is b body thanks for all reply very helpful this 11 years to get her to this point
  12. 72moparnut

    Hydraulic roller cam for bb?

    I drove it today and valve train is a little noisy or more than I would like sounds quite until gets up to temp not liking that sound going to Fresno Saturday toning to talk to a friend who races at Bakersfield speedway might know of a set of used rockers
  13. 72moparnut

    Hydraulic roller cam for bb?

    Lol cheap as possible been shopping around looks like preform is the cheapest at around 274$ for the set my rockers and rocker shafts have approximately 300 miles or less wish I could find set of rockers that would work with my shafts
  14. 72moparnut

    Hydraulic roller cam for bb?

    Running double springs not using bee hive though
  15. 72moparnut

    Hydraulic roller cam for bb?

    Sure here is spec sheet
  16. 72moparnut

    Hydraulic roller cam for bb?

    What roller rockers would be compatible for this cam?
  17. 72moparnut

    Hydraulic roller cam for bb?

    So you think I should invest in a set of roller rockers? Also does anyone know if there is any manufacturer out there that make roller rockers that I could use the stock rocker shafts?
  18. 72moparnut

    Hydraulic roller cam for bb?

    I hope nothing fails but I was told the cam would beat the rockers up and would eventually have to replace them also that the engine would not perform well. The engine sounds good although It seems not have as the rough idle like the flat tapped did they have almost the same lift
  19. 72moparnut

    Hydraulic roller cam for bb?

    I was told that running this combination would not work well or for long drives for everything to work I would need to run adjustable rockers I did get custom length push rods just getting info from internet not real reliable source as most info coms from Chevy engine builders? Does any know if...
  20. 72moparnut

    Hydraulic roller cam for bb?

    Well I was running a flat tapped hydraulic cam but it went flat that’s why the change
  21. 72moparnut

    Hydraulic roller cam for bb?

    Hello me here I have a 440 bored 30 over currently running a .549 hydraulic roller cam. Also running stock rocker assembly steel stamp was told by comp cam this combination would work fine. After talking to a few mopar guys and reading these forums kinda scratching my head?.... . Has anyone out...
Back
Top