Search results for query: *

  1. Austin Schlegel

    Temp Gauge Wiring Missing

    So I dont see the other end anywhere in the engine bay. Any idea where I can get the other end and where it would go?
  2. Austin Schlegel

    Temp Gauge Wiring Missing

    Hi, I am not getting any reading on my dash temp gauge. I think this is due to the missing connector for the temp sensor in the engine bay. I have traced the temp sensor wiring to the disconnected plug shown in the pictures. I cannot find a female connector for this anywhere. Does anyone know...
  3. Austin Schlegel

    Flex Plate not flush with TC

    Hi, I am mounting my 904 transmission up to the ole 318 and have found that the flex plate is not mounting directly up to the torque converter. If you look at the pictures you can see that there is about a 1/4" space between the fp and tc. I dont want to bolt them up because im afraid that that...
  4. Austin Schlegel

    Replacing Head Core Plug

    Hi, The core plug in the back of my passenger side cylinder head has popped out. It was one of those rubber plugs that you can expand with a wrench. I would like to replace it with the proper brass plug. The engine is a 1974 Dart sport 360. I am struggling to find the correct plug size. Does...
  5. Austin Schlegel

    904 Missing Spring

    I have a spring from another 904 that I am going to place in it
  6. Austin Schlegel

    904 Missing Spring

    Hi, I am in the process of putting back together my 1968 904. In most videos I see there is a spring for the circled servo in my pic: When I removed my vavle body I do not remember seeing a spring there. Does anyone know if I need a spring for 1968 trans? Thanks
  7. Austin Schlegel

    [WANTED] 904 Front Oil Pump Gear

    I will do some research on this and get back to you
  8. Austin Schlegel

    [WANTED] 904 Front Oil Pump Gear

    Hi, I am looking for a replacement front oil pump gear for my 1968 904 trans. The gear I need is shown in the pictures. Does anyone have one or know where I can get one that isn't too expensive? Thanks
  9. Austin Schlegel

    8 3/4 support piece

    I am running a 318 and 904, I dont think I will be pushing that high of power
  10. Austin Schlegel

    8 3/4 support piece

    Hi, I am installing the rear end back in my 68 barracuda but am missing the support piece that is shown in the diagram here: Do I need this and can someone point me in the right direction to find one? thanks
  11. Austin Schlegel

    727 Shifts Down to 2nd at highway speeds

    Can you explain what you mean by 56 degrees? And what proper parts are you referring too?
  12. Austin Schlegel

    727 Shifts Down to 2nd at highway speeds

    I still agree that I should get the proper linkdown parts for this carb though. Which I will look into getting over the winter.
  13. Austin Schlegel

    727 Shifts Down to 2nd at highway speeds

    I think I have fixed the issue. I added another quart of fluid to the transmission and it appears to be driving fine. I havent had a chance to drive it extensively though due to the cold weather and salt on the roads. Will find out when the weather gets a little warmer and post on this thread...
  14. Austin Schlegel

    727 Shifts Down to 2nd at highway speeds

    The car came with a lokar kickdown cable. Would I be better of installing that you think?
  15. Austin Schlegel

    727 Shifts Down to 2nd at highway speeds

    I will check the trans fluid today after work It was doing the same thing before the fluid change. I am barely pressing the peddle and it will shift down. Not sure what the gearing is but I know it has 7 1/4 rear end
  16. Austin Schlegel

    727 Shifts Down to 2nd at highway speeds

    I did just do a fluid and filter swap on the trans. The haynes repair manual said to fill it with 4qts if just draining and changing filter. So I filled it with just around 4 qts. My dipstick doesnt read correctly also. I need to get the proper dipstick one for this trans as well.
  17. Austin Schlegel

    727 Shifts Down to 2nd at highway speeds

    No it usually shifts right into reverse
  18. Austin Schlegel

    727 Shifts Down to 2nd at highway speeds

    It does not look to me like I have that holley adapter
  19. Austin Schlegel

    727 Shifts Down to 2nd at highway speeds

    Hey guys, I am having issues with my 727. The problem is that when I am cruising down the highway at around 50-60mph I am in 3rd gear then out of no where the trans will downshift and stay in 2nd for a few seconds then shift back up to 3rd. This happens often. I have been adjusting the kickdown...
  20. Austin Schlegel

    Brakes overheating after driving a while

    So adjusting the rod between mc and booster has fixed my brake issue. Thanks all for your help :thumbsup:
  21. Austin Schlegel

    [WANTED] 727 Dipstick

    Hi, I have a '74 727 that I need a dipstick for. Thanks
  22. Austin Schlegel

    74 Dart Wiring diagram

    Update on the battery situation. I connected the pos battery post directly too the alt output post with a new wire and the battery is charging. Thinking maybe I have a blown fusible link between the battery and the alternator.
  23. Austin Schlegel

    Brakes overheating after driving a while

    I will try adjusting the MC rod and let you all know if that helps. Thanks again
  24. Austin Schlegel

    Brakes overheating after driving a while

    Ive tried this and it seems like it relieves some of the braking force but after a while even this does not help
  25. Austin Schlegel

    Brakes overheating after driving a while

    They both look like that. I need to get them replaced as well
  26. Austin Schlegel

    Brakes overheating after driving a while

    I just went out and test this, after bleeding the fronts the car can move again easily
  27. Austin Schlegel

    Brakes overheating after driving a while

    I can give this a try I can spin them only after its been sitting for a while. If I tried to spin them after driving they will not move. I should also say that the inner pads on both wheels are worn more than the outer ones. I was thinking the same. Not sure why they'd both fail at the same time
  28. Austin Schlegel

    Brakes overheating after driving a while

    I will give this a try next time. I unplugged the hose last time and they just went to power brakes I have not replaced rupper lines. I only added fluid to top it off when I replaced the calipers. Ill post a picture of the calipers.
  29. Austin Schlegel

    Brakes overheating after driving a while

    Hi, I am new to brakes so please bear with me. I have a 74 dart sport I just bought and it is having brake issues. It has power brakes with single piston discs in the front and drums in the back. I believe the brake system is all stock. Here's whats happening: For the first ~10-20mins of...
  30. Austin Schlegel

    74 Dart Wiring diagram

    I have tried your steps and with the green feild connector grounded it is not getting above 12.5V at the battery. I then checked the blue field wire and it was getting 12v as expected. VR is also grounded. Then tested the output terminal of the alt and it was not outputing any voltage... So bad...
Back
Top