Search results for query: *

  • Users: OLFOOL
  • Content: Threads
  • Order by date
  1. OLFOOL

    Rotating exhaust valves

    Never noticed before but the J heads I have just bought, the exhaust valve once fitted I can rotate the valve when the locks are fitted, is this normal as I am quite new to small blocks. thanks.
  2. OLFOOL

    [WANTED] SB Milodon Street Stainless Valves #45645

    Want to buy 8 small block Milodon exhaust valves or same specs in another make 1.6" head, .371 (3/8)" stem, ideally 4.998"-5.02" long with single groove. I am in Australia but more than happy to pay for shipping.
  3. OLFOOL

    XE285HL in 360

    Just after some timing numbers for a XE285HL Comp Cams hydraulic flat tappet cam for my 360 that I am currently building. I am using the KB Pistons calculator to work out compression, it asks for the Intake Closing Point (degrees) ABDC @ 0.050 lift plus 15 degrees, I have the cam specs but not...
  4. OLFOOL

    Edelbrock D64

    Has anybody used an Edelbrock D64 dual quad inlet manifold on a 360, I believe they need a modification to fit? What carbs are you using? TIA.
  5. OLFOOL

    Crankshafts

    Can I fit a 360 magnum crank into a 360LA block, I have looked around for info but have seen that pistons and rods in a magnum are lighter but thinking this could be overcome when balancing the parts? Basically use all LA internals but magnum crank. Any help appreciated here in Australia, :)
  6. OLFOOL

    360 build

    Building a 360 and have come up with these figures for my build at this stage using CC XE275HL, J heads 2.02/1.60. Will run on pump fuel 98 octane ULP which is same as 93 US octane I believe.
  7. OLFOOL

    360 Roller cam

    Can anyone shed some light on this cam I have found?
  8. OLFOOL

    62cc J Head Chamber

    I have a set of J heads with 68cc chambers, I need 62cc to reach the 10.4:1 compression I need. I already have a set of Cometic head gaskets .060" which I will use. Has anyone milled them that far?
  9. OLFOOL

    [WANTED] LA 360 alloy heads

    Want to buy a set of ally heads to suit LA 360 engine. I live in Australia but more than happy to pay for shipping, Thanks Brian.
  10. OLFOOL

    3671587 Heads 2.05/1.60 on 318?

    I am not sure whether these heads are J heads? They have been ported by the looks, they were on my 340 +.040" and worked well, my main question is will they work on a 318 +.040" I am building. Will be 10:1-10.5:1 compression, flat tappet hydraulic around .480" lift, will the intake valve clear...
  11. OLFOOL

    Dynamic comp on 390

    Just wondering if anyone could work out the dynamic comp on the 318 stroker we are about to build using a Comp Cams Xtreme Energy 242/248 Hydraulic Roller I normally use the UEM calculator but it asks for inlet ABDC @.050" and the roller is at .006". Any help appreciated.
  12. OLFOOL

    Gidday from Australia

    Hi all, have an Australian A Body and been playing with them for over 40 years, but still learning as I go.
Back
Top