Search results for query: *

loooking for FREASH AIR DOOR AND HING COMPLETLY FREE OF RUST AND INTACT AS ONE PIECE WITH MOUNTING RIVETS TO BOX WILL BE REPLACED LOOKING FOR THIS DOOR AND HINGE FOR A 1965 BARRACUDA

I'm just curious my interior trim that does along the bottom of door do I run carpet fully to frame of door or cut short just enough to for screws to clear and go into holes . The first photo is me pulling the carpet back so that it will clear the holes or second picture is not clearing the...

I am looking for the splash guards that go behind the headlights in the front wheel wells on the driver side and passenger side for a 1965 Plymouth barracuda I have the rear splash guard up along with the rubber strips to seal it but I am having no luck on finding the front splash guards in the...

I have the rear splash guards and seals on already I am currently on the hunt for the front wheel will splash guard that goes between the headlights and the front wheel I have the seals for them just not the guards themselves anyone have any idea on a location of some eBay or websites. The...

On the 65 barracuda the eclipse that hold the bottom rail underneath the door that goes from the front tire to the back tire what are those clips part numbers and what are they called specifically I have a couple but the old ones are a dry rotted and broken here is a photo of what I am looking...

Anybody with any tips or pictures on how to install these headlight adjusters on the 65 barracuda pictures and tips would be awesome

I've seen that people are saying when I put the 360 la motor into this car they are changing the suspension on the front and rear because of possibly the weight maybe I'm not sure first time ever doing a motor swap so this is all new in educational to me

So I've been trying to find the right water neck and I can't seem to order right size anyone want to come in tell me what's part number. I'm looking for a short strong one. The blue one is original could I just get away with cutting it shorter . The center of bolt holes is 2 7\8 and idky I get...

I'm running only the alternator and waterpump plus crankshaft what size belt goes on the stock 360 la need some guidance .

I've got a 904 3 speed tranny ND I javelin also gotten a champion cooling radiator would anyone be able to help locate the right size cooling lines for the 360 la small block v8 motor and 904 tranny going into a 1965 plymouth barracuda originally a slant 6 any link to exact part just a part...

I believe inhale a 360 la small I am looking for the water neck and I believe the regular 360 not the la , but the water necks are same size but the 360 la water neck us smaller than the 318 and regular 360 v8. Can I get a part number for the water neck . I hate getting wrong parts. Sadly I just did

So I am curious as to what this is it's beside my distributor I wanna say it's just a rubber stud to hook one of the springs . Idk any info would be appreciated

If anybody could help with a part number or a website link 4 the J rods that hold the heater box and fresh air box to the Mount of the dash underneath

Where would be the best place to run my electrical from under dash I have a 21 circuit new harness everything is dumby proof. Just want a idea of where to locate it and how do I go about closing the old bulk head off . Just a small piece of metal over it and boom done. Let me hear it yall new to...

Here are some pics of numbers on my tranny can anyone help identifity the trannt. Iveen told its a 904 auto here are some pics

Okay I have a 360 la motor with the 4 banger edelbrock carb with a 1 spacer I javelin cables for throttle and kickdown on its way . So my question is I need fuel lines and water lines and I've never worked on a mopar or chrysler I'm new to the whole resto down to the bones. I'm wanting to know...

Simple as that I am looking for a torsion bar for the driver side of the 65 barracuda DRIVER SIDE ONLY THATS ALL FOLKS

Okay I need this clip it is the clip at the end of parking brake line that holds it in the frame under driver side of car. Any part number or links I appreciates it

Im dropping a 360 la motor with 727 tourqeflite tranny 3 speed . Any one got Install pics of alternator mounts and tension pully mounts I'm running no ac no power steering. Just a fan the alternator a water pump and I assume a tension pully. I'm new to the motor swaps , so any tips or...

I am looking for these type of wire connectors for the early a body 65 barracuda doing a rewire and would like to keep original bulb sockets just need new ends to crimp on new wires here is a Pic of the type of ends I need anyone have a part number or have them by the handful let me know please...

I have the metal line to run from tyranny to radiator. But would a metal mesh line to better just curious . It's a727 4 3 speed if I'm not mistaken it's getting a Hurst o magic shifter would like to know if there is any advice as to putting it from column shifter to a floor shifter any...

I have the 727 tanny on the motor and it's in a 65 barracuda any suggestions on driveshaft set up have the ypke just looking for insight on proper size I'm getting 52.5 inches leaving 1/16 to an 1/8 of slop. Found one on speedway motors but I'm new to the motor swapping and I want it right...

I've been putting together a 65 barracuda and I'm curious does anyone have the interior panels in good shape and also looking for firewall plates and grommets I have a classic industries cat. But wouldn't mind getting from a regular person need a good amount of interior and stuff. Here is my...

I have a 1965 Plymouth Barracuda and the steering gear box someone welded it to the actual input shaft is there somewhere I can by the replacement shaft to put in or will that be better off buying a whole new steering gearbox

I have a 65 barracuda and im putting a chrysler 360 init . I have no clearance on headers to put the pipes coming off of it and whaich part is the parts I need to get that specific motor in and measurments or diagrams and any iformation is appreciated begginer car builder. Im in north carolina I...

Hey everybody stuff only found how to make a post so I have a 1965 Plymouth Barracuda it originally came with a slant 6 and we are trying to install a 360 V8 into the engine bay where can I find the motor mounts to do the Slant six to the v8 conversion because the motor mounts that I found very...