Search results for query: *

  1. CluelessMopar

    [SOLD] A-body 8 3/4 Rear Housing

    Up for sale is a 8 3/4 housing. It's in good condition. Measures 52 5/8 from flange to flange. These are getting hard to come by these days! $300 I will not ship, I'm willing to drive up to 25 miles if you want to meet up. Location: Lansdale Pennsylvania
  2. CluelessMopar

    [SOLD] Small Block Hydraulic Roller Cam

    Herbert Cams Hydraulic Roller for small block Mopar. Cam has about 500 miles on it before I blew my 340 up by spinning some rod bearings. Only selling because I ended up stroking the 340 to a 418 and decided to go with a bigger cam overall. Cam ran great and had nice street performance to it...
  3. CluelessMopar

    Help determining 340 cam

    Appreciate the response... I had a feeling this was going to be way too much cam for my intended use. I'm debating putting in a Comp Cams Big Mutha Thumpr or just the regular Mutha Thumpr. I love the rough idle sound but I know people aren't too fond of them. Also looking at the Hughes "real"...
  4. CluelessMopar

    Help determining 340 cam

    Man you called it almost spot on... Pulled the cam out and this is what I found: Lunati 30200917 Lunati High Efficiency Camshafts | Summit Racing Now idk if I should keep this cam or get a different one so it's more streetable. I don't want to get tied down to a super high stall converter.
  5. CluelessMopar

    Help determining 340 cam

    Just to clarify you're saying .014 is a good reference point to set the valve lash... then adjust more less based on the idle? And that's a cold lash correct?
  6. CluelessMopar

    Help determining 340 cam

    Okay guys, be kind.... I'm new to engine building/tear down :) I recently picked up a 340 long block with 10:1 compression and I'm trying to figure out the camshaft to determine what torque converter to run... Before I purchase a dial indicator or remove the timing chain cover to determine the...
  7. CluelessMopar

    340 Swap

    Was a 71 Demon that a guy spent close to $40k building. Car was in a accident where it was hit on the driver side fender. He got the insurance for the car and decided to sell the car to my buddy. My buddy has been parting it out for awhile. I actually have the TTI exhaust (3 inch with X-pipe)...
  8. CluelessMopar

    340 Swap

    How much Marvel Mystery oil would you recommend in each cylinder? Just a like a tablespoons worth?
  9. CluelessMopar

    340 Swap

    Perfect! I did not know that :) Thanks for the tip!
  10. CluelessMopar

    340 Swap

    Oh really? That's disheartening.... I guess I'll need to measure the lift on the rockers?
  11. CluelessMopar

    340 Swap

    Sorry when I said taking the timing cover off I really meant take the timing chain off and see if I can see any markings on the cam shaft. Was also planning on doing head gaskets. I should have said that in my initial post. I'll correct it now :)
  12. CluelessMopar

    340 Swap

    Hey I'm actually in PA as well. I'm in Lansdale so that's about an hour and 30 min away. I might take you up on that. Send me a message and I'll give you a call. Hopefully I'll know more once I open the engine up a bit. I appreciate your help, I new to figuring out torque converters.
  13. CluelessMopar

    340 Swap

    I'm buying a 340 engine off a buddy that he's had sitting around for 10 years. The engine was fully rebuilt with less than 1000 miles on it before the car it was in was damaged in a fender-bender. I'm unsure of the cam, pistons, etc... All I know is that it has Edelbrock Performer RPM heads and...
  14. CluelessMopar

    Upgraded 360 Cam?

    So after looking around a bit I found this cam, which is probably pretty close to the 340 cam. Would this be more suited to my application? COMP Cams SK20-222-3 Xtreme Energy Camshaft Kit, Mopar 273/318/340/360
  15. CluelessMopar

    Post your wheel and tire combos.

    Cragar D-Window 15x7 Front: 205/60/15 Rear: 225/70/18
  16. CluelessMopar

    Upgraded 360 Cam?

    It's a 76 that came out of a motor home with 727. I think the engine had about 80k miles on it when pulled
  17. CluelessMopar

    Upgraded 360 Cam?

    Heads will probably be in 8 months. Cam would be right now.
  18. CluelessMopar

    Upgraded 360 Cam?

    Understood. I wasn't sure what I could/couldn't get away with for my stock engine.
  19. CluelessMopar

    Upgraded 360 Cam?

    Is there a comparable cam I should look for online? Appreciate the help guys! I'm not sure how to go about correctly adding power to my motor.
  20. CluelessMopar

    Upgraded 360 Cam?

    It's the stock cam from the 360. I think the specs are as such: 252/252 duration. 410/410 lift.
  21. CluelessMopar

    Upgraded 360 Cam?

    Would it be best to upgrade the converter along side of the cam? Or just run a milder cam?
  22. CluelessMopar

    Upgraded 360 Cam?

    I'm planning on doing a higher performance cam in my 360 and probably a pair of Edelbrock RPM heads within the next year. I currently have a dual plane intake, headers, 8.75 rear with 355's. Will this Lunati cam be problematic if I'm running a stock torque converter? End goal is just to add...
  23. CluelessMopar

    1969 Dodge Dart backspacing

    They were 215/50/17 wheels. I bought a beat up pair of Mustang torque thrust wheels. Unfortunately they rubbed on the fenders pretty badly when turning. I ended up going with a Cragar D-Window wheel with 4.25 backspace and a 205/60/15 tire for the front and 225/60/15 on the rear. Hopefully those...
  24. CluelessMopar

    1969 Dodge Dart backspacing

    Rear has moser axles with stock BBP drums & front was all stock RockAuto parts for 76 Dart that I purchased. I had a 17x8 wheel with 5 backspacing on the front and that rubbed up against the fender when turning pretty good. It's been hard to find wheels that are 7 inches with backspace greater...
  25. CluelessMopar

    1969 Dodge Dart backspacing

    Hey guys, I have a 1969 Dart that I've converted to big bolt pattern with front disc brakes and rear drums. I was looking at Bassett D-hole wheels to put on my Dart but was concerned that I may not have enough backspace for the front fenders. Anyone know if I would have any issues with 15x7...
  26. CluelessMopar

    Proportioning Valve

    I'd have to go back and look but I'm going to say no I don't.
  27. CluelessMopar

    Proportioning Valve

    I recently went to bbp disc brakes on the front of my 69 Dart. I ordered 74 Dart brakes from Rock Auto and new master cylinder for disc front/drum rear. I bled the brakes and had no leaks at the bleeders. Everything seemed good up til actually testing the brakes on a little brake check up/down...
  28. CluelessMopar

    340 Block Cost

    That's not a bad idea. If I go the route for this block that may be what I have to do.
  29. CluelessMopar

    340 Block Cost

    Solid advice! Appreciate it man
Back
Top