Search results for query: *

Well I finally got the tunnelram installed in my 96 dakota race truck. I wanted to run volocity stacks, but don't have the room with my hood/scoop combo. I have a 5 inch tall mopar six pack scoop. Looks like I only have about 4-3/4 inches of room from the carb to the under side of the scoop. So...

Hi I am going to be building a 14.1 360 magnum stroked to 408 inches. The engine will be going in my 91 Dodge Dakota sport race truck. My problem is 1-5/8 is the biggest size header I can find that is offered for my dakota . I have full length hooker headers on it now. I am wanting to go to a...

Well it looks like I am going to be buying a 64 valant off my son. I have a gen3 hemi stroker kit I was going to use. But for now I was thinking about building the spare 360 magnum engine I have or pull the 360 magnum out of my dakota. Ok my question is does any company make race headers for it...

Well looks like I am for sure going to be building a gen3 hemi engine for my 91 dakota sport race truck now. Lol I found a guy that has a machined early 5.7 hemi block and a 397 k1 stroker kit with wisco forged pistions that comes with it. He was asking $3000 and I offered him $2500 thinking he...

Hi. Does any body have a good recommendation for a weather station app for a android phone? Been thinking about getting one for my phone, but not sure which one to use.

Hi. I have a 91/96 dakota race truck with a 2000 360 magnum engine. I am useing the stock 5 qt dakota oil pan. Well I had to replace my leaking rear main seal. So while I have it torn down I figured now would be the time to add a windage tray. But not sure which one to get. Huges website says...

Ok who is going to step up and try this system out. Jpar? Lol

Well I am thinking about building a 426 stroker engine with my spare 360 magnum block. I have been looking at the kit that Huges engine sells. The engine will have 13.1 compression and not sure what size yet. But would like to put in a solid roller. Will be useing my trickflow heads and my...

First I would like to say Merry Christmas every one. Here is a video of a pass with my dakota. I hope it works. Lol

I got to race my dakota tonight at a test in tune. Last Saturday I raced during the day and the weather was in the upper 70. I ran a best of 7.34 at 92 mph. With a 1.60 60 foot. Well tonight I ran 1.57 60 foot 7.15 1/8 mile 95 mph 11.24 1/4 mile 114.60 mph I ran two 7.15 1/8 times to night...

Well after 3 years of working and building my pro-junk yard dakota. I finally made it to the track. Now hopefully it will drive its self on the trailer at the end of the day. Lol i don't have a clue what its going to run. We are running 1/8 mile today.

Hello I am trying to find out if a Dayco P/N PB1108SS Harmonic Balancer will work on a a 5.9 magnum engine with stock external balance. My brand new PRW balancer is junk. So I have to find something else. But there doesn't look like there is much to pick from for a magnum engine.

Well after a few months I finally got the 360 running. The magnum indy 360-M intake kicked my *** for all most a month. I sent it off to get it redrilled for the LA bolt pattern. Then had to get 0.90 shaved off the sides and 0.120 off the end rails. Ok I must be a Dumbass or something or my...

I have a 5.9 magnum that I installed the new trickflow heads on. I am running a comp cams soild lifter. I have to use push rod oiling so I have AMC lifters and Smith Brothers push rods. Which are 3/8 x.083 wall thickness. As far as I can tell there is only a few rocker arm choices that allow oil...

Well I just order a new set of ceramic coated headers for my Dakota and I am going to have to move my o2 sensor. I see that they make header collectors that have the o2 sensor bung welded on. So I got to looking and see that they also sell header extensions in 12 and 18 inch lengths. I have...

Ok is any body elese useing the Fast custom fit Fire Wire spark plug wires? I bought a set for my 5.9 magnum Dakota race truck. They was around 60 something shipped to my door. Well removing the plug wires so I could pull the cylinder heads. I had 4 of the plug wire terminals come off the wire...

I just found out today that my home track is open for business next Friday May 8th. But kind of sucks for me because my dakota wont be ready by then. Lol wating on rockers, push rods and intake to get here. But any way wanted to share the good news. Has any body elese heard about there home race...

I just orderd a set of the trickflow heads for my 360 magnum engine. I am wanting to use my indy single plane intake. Its already been ported etc. So I need to drill it for the LA bolt Pattern. Has anybody drilled one with out a template? Could I just lay the intake gasket on the intake and mark...

Well seems like every time I think I am getting closer to getting my 96 dakota race ready, I take a step back. Lol pluse I can't believe it's something as simple as a tool. Lol well any way I need to set the timing on my 360 and went to grab my trusty over 20 year old crafstman timing light...

Help. I just got my new PRW balancer in and ready to install it on my magnum 360 engine. The snag I have ran into is the balancer comes with 3 diffrent weights. Of course the way my luck goes, the instructions don't say crap about which weight is used on which engine. There is a large weight,a...

Ok I am getting closer to getting my pro junk yard 96 Dakota to the track. Lol but I need a drive shaft made for it. I would like to get one made in aluminum and will use 1350 joints. So who would you recommend to build it? Also what is the going price for one? Thanks Mopar 65

Is any body using a Magnum SFI Ballancer? If so what brand and model are you using? I am not sure which one to get. Don't want to buy a cheap one and have it come apart on me. Thanks mopar65

My son has a 1988 Dodge D150 2 wheel drive truck with the 5.2 engine with factory FI. It looks like every gasket on it is leaking oil. Lol he is wanting to replace the intake gaskets. So I looked the parts up on Orileys auto parts website and it shows two diffrent size intake gaskets for the...

My son has a 1988 Dodge D150 2 wheel drive truck with the 5.2 engine with factory FI. It looks like every gasket on it is leaking oil. Lol he is wanting to replace the intake gaskets. So I looked the parts up on Orileys auto parts website and it shows two diffrent size intake gaskets for the...

Well this damn Dakota is taking me forever to get built, but I finally got another big item done last night. I got the ford exploder rearend installed last night. Just have to add gear oil and make a new hard line for the disc brakes. I hope to have it ready for next spring.

Hello. I am almost to the point of getting my Dakota race truck running. I am to wiring up the mopar Distributor now. I am using Digital HP ingtion box made by Pertronix. I am using the magnetic pick up wires, that have green and purple wires. The problem I am having is the mopar Distributor...

Hello I am Hooking up my new Pertronics Digiral HP box and i am getting close to setting all the different programs. The one I think I know which setting to set it at, but a little unsure of my self. So i figured i would ask on here. Ok in the instructions there is 3 Trigger settings to pick...

So there has been a little buzz and I didn't want to release anything until it was basically ready...but here it is. Do you have a Magnum engine making (or expect to be making) north of 500 whp ? Are you worried about breaking the factory flexplate , or maybe you already have? With the help...

hello I am building a 96 SB Dodge Dakota to drag race with. I will be only using the Serpentine Alt belt. the water pump will be electric. so trying to see if anybody else has done what I will be doing. if you have do you remember the belt number? if not I will try and measure the belt out and...

hi was just wondering if anybody besides me building or racing a 87-96 Dodge Dakota? If so I would love to learn about your build etc. I have started building a 91 SB 2 wheel drive Dakota sport. Mine was a factory V8 truck. After I got the truck home, I found out the cab mounts etc are Rusted...