Search results for query: *

I am in the process of installing a 1971 340 in my 1964 barracuda. When the 340 was rebuilt, they installed a 340 oil pan on it. I had almost fully installed the motor and I noticed the center-link hits the oil pan. on both sides. I am using the stock 273 exhaust for now and it also hits the oil...

I purchased new studs and installed them with sealer as instructed above. Thank you very much to everyone at FABO

Hi Guys, I just installed a New Borgeson small sector power steering box in my 1965 273 4 speed barracuda. The box went in quite easily. but I have a problem. The federal power steering pump which worked perfectly with the old... stock 'Gygundic' [huge and heavy] steering box does not work at...

Thanks Guys!!! For all the help. Just to be safe... I'll seal All of them, it can't hurt Angelo aka Guido

I am pretty sure I know but I don't want to make a mistake. And which thread sealer should I use. Thanks Guys.

I just want to make sure I am sealing the correct studs-bolts when I install the exhaust manifolds. So... I don't have to do it twice. Also, any recommendations on which thread sealer to use. Thanks guys, for the help

The bottom hose is on the driver side, the top hose is on the driver side of cap to clear my AC. I believe the water pump is the 69 style. I changed it to match up with the radiator that was in the car. Now I know the current radiator is for a mustang and was mickey moused and too small. So I'll...

I am leaning towards the 3 row. The 4 row feels like overkill for my 340. I have a stock mechanical fan now, and a pusher electric fan that kicks on when the AC is on. I'll start with that. If it over heats, I'll replace the mechanical fan with the Derale shroud and fan, with their variable...

OK I measured the 1964-1/2. The Champion MC64DT radiator dimensions appear to be correct for my 1964-1/2 white/gold 340 mild cam 3.91 gears push button auto barracuda except the top inlet would have to be moved to the driver's side because of my aftermarket AC. Ledfoot racing will sell me the...

Sweet car!!! Thanks for the radiator P/N. looking it up now. I do need the top outlet on the driver side of the cap to clear my aftermarket AC. The CC1635 Champion recommended appears to be too tall. I just measured my 65 see pic. The 64-1/2 is at my friends shop hopefully the 64 dimensions are...

I am swapping my 273 for a 340 into my 1964-1/2 barracuda automatic push button. Looking for recommendations on what radiator will fit. I am concerned about the radiator cap hitting my hood. Champion said their CC1635 will bolt right in, but I am afraid it will be too tall and the radiator cap...

OK it's been a while since I replied on this post. The day before I got the rebuilt '71 340 motor from the shop. My wife and I got t-boned by a girl on a cell phone who ran a stop sign while we were stopped dead in traffic. 23K worth of damage to my car. The body work is now 40% done so I...

This is what was on the intake with no thermostat. It came with a o-ring and no recess for a thermostat. Is there a Motorad style with the t-stat recess like the 4830kt housing but with the neck at this angle so I don't have to buy a new top radiator hose? Most pics on the internet don't show...

I just ran into the exact same problem. do they make these housings with the neck at an angle instead of straight up?

Great answers!!!! I reached out to Bergman Auto Craft they recommended 1.08 torsion bars, Bilstein shocks Dynamic strut rods and offset upper control arm bushings to increase camber. I am concerned about 1.08 dia torsion bars being too stiff. Any thoougts? Who else sells torsion bars for the 65 cuda

Hi Guys, I wasn't able to read the stamped numbers on my T-Bars yet, but I measured them from underneath at about .860 to .880 or so in diameter. Does anyone know the torsion bar p/ns. [I know there are 2 p/n's, even and odd, for left and right side]. Here is my problem. I crank in the...

Hi, My 64 Barracuda got t-boned last summer and the repair is moving along. I need a complete Passenger side upper control arm assembly, with all the bolts and the ball joint. Thanks, Angelo aka Guido

Hi JD, I am making some progress on installing a b body center console into my 65 a body 4 speed cuda. I found this '4084' shifter handle that will bolt up onto my 4 speed hurst shifter. It should bring the shifter handle into the center of my tranny hump. It looks like I will be able to mill...

Hi Mike, You sent this to me before and I didn't get how that was to help me with my 4 speed B body center console in a 65 A body cuda project? What am I missing? Angelo aka Guido

Hi, Here is the pic again of my 64 barracuda with stock seats and a center console from a 64 automatic dodge polara. [the tach is from a 64 GM car]. I purchased brackets online and moved both seats out towards the doors after removing the broken seat belts and the center console fit in. I milled...

I have all the body parts to fix this except for the aluminum rocker panel sill plate. Laysons has it on back order. After they pull the hinge pillar and rocker panel out on the frame machine... they said we may need to have a rocker panel and hinge pillar cut form a junk yard donor car. Then...

thanks for trying but ur correct its a bit rough

Does anyone have one? or a recommendation on a good one to buy? I have to cover it while outside at the body shop Any thoughts on a 'carcoon' type inflatable car port?

Not the entire metal dash, just the vinyl dash pad that get's dyed then glued to the dashboard

Thanks everyone I bought one on ebay

Looking for a 1964-65 License plate light complete assembly, maybe even the same in 66. I am thinking Valiants and Barracudas in that year range may be the same here is what one looks like from a barracuda

here is mine from a 1964 barracuda

Hi, I am looking for a complete license plate assembly for a 1965 Barracuda. See picture. The mounting screw spacing is 7.5 inches

how is the pedal pressure? and no chatter I assume